Personal Descender.

SALA Manual Descender is a versatile tool for rescue teams, it allows descent, evacuation and work on the rope. Descent is easily controlled, thanks to the descenders handle and an anti-panic function eliminates the risk of accidents caused by incorrect handling. Available in rope lengths of no rope, 10m, 20m, 30m, 50m and 100m ropes.

Vertical Wire Rope Lifeline Permanently Installed Suitable For End User Installation. Soll Vi-Go Vertical Wire Rope Lifeline Soll Vi-Go is a fall protection system that can be retrofitted onto existing climbing devices such as ladders or rungs used in wind turbine, power supply, telecommunication or other industry. It is basically made up of a steel rope or cable (three different types), fastening elements and a revolutionary guided-type fall arrester. We can provide this product for a competent user to install them, thus greatly reducing costs.

Horizontal Cable-based Fall Arrest Anchorage Device.

Soll Xenon Single Line Fall Arrest Lifeline System is an anchorage device incorporating a flexible wire rope. The principal components of the system are; shuttles, shock absorbers, intermediate anchors and end anchors. The Xenon Horizontal Lifeline can provide the perfect safety solution for installation, maintenance and cleaning at height. It can be used; in industrial plants, on roofs, on cranes and over vehicles.

Miller Quality 2m, 3m & 4m Adjustable Lanyard for Work Positioning and Restraint. Jaw Type Adjuster. MC01, MC02 and MC03Complies to EN358.

Adjustable Fall Restraint and Work Positioning Lanyard for those who have to work at height in a safe and supported hands-free position. the lanyard is fitted to a supporting structure and then connected to the side D-rings on the operator's belt or harness. Available in sizes 2, 3 and 4m.

Miller Quality Automatic Rope Grab with Manual Mode For Restraint. For Vertical & Horizontal Use to EN353-2.

Miller MF52 Auto/Man Rope Grab is suitable for vertical, horizontal and sloping rope grab where the user locks the grab on the rope for restraint purposes, and repositions it manually along rope. Available for 10-12mm or 14-16mm. MF52 supplied complete with 0.3m lanyard and connector.

Automatic rope grab with 12mm rope.

Economy Automatic Guided Fall Arrester Rope Grab and anchorage line is designed to prevent workers from falling during ascent or descent. It is particularly useful on sloping roofs where retractable lifelines may react too slowly. The automatic rope grab locks onto the rope in the event of a fall, arresting a fall within centimetres thus reducing the fall arrest forces and facilitating rescue. Available in sizes 10, 15, 20 and 30m.

11mm Quick Link.

Quick links enable a semi-permanent connector between different parts of a Fall Arrest System, such as between a harness and a lanyard, or a work positioning belt and a lanyard. Made from stainless steel giving a breaking strength of >35kN and an opening of 11mm.

Miller MicroLoc Automatic Rope Grab for use with 14mm & 16mm Rope.

Miller MF00 Automatic Guided Fall Arrester Rope Grab is a long-lasting, lightweight and reliable automatic rope grab for retrofitting onto existing ladder systems, ideal for harsh environments. Can be used with a 14mm and 16mm rope. They are lightweight and reliable and made from stainless steel. The grab immediately stops the fall.

Manual Rope Grab for use with 14mm & 16mm Rope.

Miller MF50 Manual Guided Fall Arrester Rope Grab is only available for use with 14mm and 16mm rope.

Detent Wall Anchor.

This allows user to work at different locations where a socket is pre-installed, with a single detent pin. Lightweight and portable, allowing user to easily move from job site to job site, can keep attached to lanyard at all times. Available with 3 different options - assembly including pin, socket and cap, detent pin, detent socket and cap.

Roof Anchor designed to be directly secured to the wood beams of a roof framework.

Roof anchors are designed to be directly secured to the wood beams of a roof framework. Anchor shapes (straight, arched or spiral) are designed to match with the type of roofing used. Available in different models: flat anchor, bowed anchor and twisted anchor. Each are available in galvanised or stainless steel with fastening pins and annular rings.

Removable Swivelling Eye Bolt Anchorage Point. Complies to EN795.

The SELSRAP is a temporary anchorage point for 2 simultaneous users comprising RAP-anchor sleeve and a detachable RAP-ring eye as the main components. It has been tested as per EN 795. Available with a range of different attachments - 100mm Anchor, 125mm Anchor, 200mm Anchor, 250mm Anchor, Angle plate and Plate fixing Aid.

Anchorage Plate.

The anchorage point for connection to a suitable and strong enough support structure to create a fall arrest anchorage point, restraint anchorage point or for performing a rescue of a casualty having fallen when working at height. This is a permanent anchorage point on a structure with minimum structure strength of 10kN.

Fall Protection Anchorage point, can also be used as a lifting device for personnel protection equipment (PSA).

These fixing points can be fixed permanently on a structure to lift personnel protection equipment (PPE). The PSA-VRS (STARPOINT) are not intended for the permanent outdoor use, if needed for outdoor use we recommend the stainless steel PSA-INOX-STAR. The components correspond to the European Directive for "personnel protection equipment" and are marked with the CE-Stamp as well as with the number of person (1 or 2 persons) which can be carried.

EN795 D-Ring Anchorage Point, 15kN Strength.

Corrosion resistant made from stainless steel this is an anchorage eye made from stainless steel and is used for personal fall arrest systems (single person) or for restraint/rescue.

7.5mm Delta Link.

Quick links enable a semi-permanent connection between different parts of a Height Safety Kit, such as between a harness and a lanyard, or a belt and a work positioning lanyard. Made from stainless steel with a breaking strength of >12kN and an opening of 7.5mm.