Lifting Safety

LiftingSafety Double Action Snap Hook. Opening 27mm

Aluminium double action snap hook connector. 30kN rating.

Model: LAK-4612

ATEX Pallet Trucks Built To Customers Specification - Range from 1000kg to 5000kg

Standard or bespoke explosion proof ATEX approved pallet truck.

Model: PT-3688

These pallet trucks can be designed around your business requirements. Atex Zone 1, Atex Zone 2 including Atex IIB.

Overhead Crane Automatic Drum Lifter for Lifting Steel or Plastic L Ring Drums, 500kg Capacity

Crane slung scissor action automatic drum grab / clamp for lifting steel or plastic L-ring drums from 550mm to 620mm diameter.

Model: DTG-AU-SG-1 / ADL-3663

This can either be used under slung from a forklift or overhead from a crane hoist.

Fork Lift Truck Big Bag Handler Attachment - 1000kg

Fork lift truck big / bulk bag handler attachment for the handling of standard big bags.

Model: FBBA-3561

This attachment has been specifically designed for the handling standard big bags, this forklift bag handler allows bags to be lifted by the loops. The loops are located in claws set on each corner enabling quick and easy loading, unloading and transportation of big bags. The big bag handler is secured on to the forks of the truck using heel pins.

Snow Plough Attachment For Fork Lift Trucks, Shifts Snow to the Left as Standard. Fitted with 10mm Wear Strip - Plough Blade Width Range from 1.22m to 2.13m

Fork truck mounted snow plough attachment with a blade width options from 1220mm to 2130mm. Right hand clearing / shifting also available.

Model: FSPA-3554

Manual Geared Overhead Crane - Range from 250kg to 6300kg

Manually manouvered gear travel (chain drive) suspended overhead cranes without hoist.

Model: MGOC-3280

This crane is delivered complete and ready to assemble, has long travel rubber buffers, a safe working load plate and safety markings. The end carriage is fitted with machines steel wheels.

Imperial Long Thread Collared Eye Bolt to BS529

Long shank imperial thread (BSW or UNC, 3/8" to 1-1/4") long shank collar eye bolts. 250kg to 4.5 tonne lifting capacity.

Model: ITLCE-3269

Imperial thread long shank collared eyebolts are available in the follwing thread sizes: 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4 inch.

Imperial Thread Long Collar Eyebolts are available in the following sizes - 0.25t, 0.5t, 0.9t, 1.4t, 2t, 2.75t, 3.5t, 4.5t.

Also available in the following thread types: Whitworth (BSW), UNC

UN8 Collar Eye Bolt to BS4278

High tensile 8UN thread (1-1/8" to 2") collared eye bolts. 3500kg to 12000kg lifting capacity options.

Model: UTCEB-3268

Based on BS 4278 Table 4 Appendix ‘A': 1984. Material: As specified by BS 4278 Hardened and Tempered. SWL (Safe Working Load) shown at 0° (true vertical) angle of lift. Larger and Intermediate sizes available on application.

Imperial Thread Collared Eye Bolt to ISO3266/BS4278

3/8" to 3" imperial threaded (BSW, UNC, BSF or UNF) collar lifting eye bolts. 250kg to 30 tonne lifting capacity options.

Model: ITCE-3267

Can be supplied in a choice of threads which are: BSW (British Standard Whitworth); UNC; BSF or UNF.

Fork Truck Mounted Drum Handler Attachment for 15 inch Fibre Drums, Ratchet Strap Attachment - 250kg

Fork mounted drum handler to handle fibre drums of 381mm diameter

Model: 1DHA-3130

This unit is a fork mounted drum handler to handle drums of 381mm Diameter. The drum is secured into the V shaped front  by twin rachet and webbing straps.

A-Frame Aluminium Gantry with Twin Top Beams and Castors - 2000kg or 3000kg Lifting Capacity

Fully adjustable twin top beam, movable under load alloy gantry crane with folding lateral legs and two-part top beams.

Model: MULG-3123

Top of the range gantries Manufactured in German that are adjustable, light weight alloy and mobile. The twin parallel double overhead lifting beams add increased stability to a gantry system and are designed to be moved when under load and have a wide working span of 4 metre. With the twin beam system the load trolley rests between the two beams and distributes the load evenly with smooth traversing on-long the beam, the hoist sits between the two beams giving a very high raised hook position (low headroom).

Aluminium 2-Part Top Beam Lifting Gantry - 1000kg or 1500kg

Adjustable lightweight alloy gantry crane with a top beam that splits in two pieces, has folding legs. Optional heights.

Model: STBAG-3103

6 options; this is a range of lightweight aluminium lifting gantries that are designed to be ultra portable. The horizontal (overhead) lifting beam splits into two pieces so that is can easily be transported between locations and will fit into most small vans. The legs collapse and the gantry is fully adjustable. A quality product made in Germany.

Large Bow Shackles with Screw Pin, Generally BS3032

Quality EU Manufactured, High Tensile Large Bow (Omega) Shackles Generally to BS 3032 Table 3, with 'A' pins. WLL Range from 450kg to 11,500kg

Model: LBS-3101

Available Capacities : 450kg, 750kg, 1250kg, 2000kg, 2750kg, 3750kg, 4750kg, 5750kg, 7250kg, 8500kg, 9500kg, 11,500kg, 13,000kg, 15,000kg, 18,500kg, 20,000kg, 25,000kg, 30,000kg, 35,000kg, 40,000kg, 50,000kg, 65,000kg and 80,000kg.

Shackle Diameters available: 10mm (3/8"), 13mm (1/2"), 16mm (5/8"), 19mm (3/4"), 22mm (7/8"), 25mm (1"), 29mm (1 1/8"), 32mm (1 1/4"), 35mm (1 3/8"), 38mm (1 1/2"), 41mm (1 5/8"), 44mm (1 3/4"), 48mm (1 7/8"), 50mm (2"), 57mm (2 1/4"), 60mm (2 3/8"), 67mm (2 5/8"), 73mm (2 7/8"), 79mm (3 1/8"), 86mm (3 3/8"), 95mm (3 3/4"), 108mm (4 1/4") and 117mm (4 5/8").

Large "D" Shackles with Screw Pin, Generally to BS3032

Quality EU Manufactured, High Tensile Large Dee Shackles Generally to BS 3032 Table 2, with 'A' pins. WLL Range from 500kg to 20,000kg

Model: LDS-3100

Available Capacities : 500kg, 750kg, 1500kg, 2000kg, 3000kg, 3750kg, 5000kg, 6000kg, 7000kg, 9500kg, 11,250kg, 13,000kg, 14,250kg, 16,250kg, 18,000kg, 20,000kg, 25,000kg, 30,000kg, 35,000kg, 40,000kg, 50,000kg, 65,000kg, and 80,000kg.

Shackle Diameters available: 10mm (3/8"), 13mm (1/2"), 16mm (5/8"), 19mm (3/4"), 22mm (7/8"), 25mm (1"), 29mm (1 1/8"), 32mm (1 1/4"), 35mm (1 3/8"), 38mm (1 1/2"), 41mm (1 5/8"), 44mm (1 3/4"), 48mm (1 7/8"), 50mm (2"), 54mm (2 1/8"), 57mm (2 1/4"), 62mm (2 1/2"), 70mm (2 3/4"), 76mm (3"), 79mm (3 1/8"), 89mm (3 1/2"), 102mm (4") and 114mm (4 1/2").

Small Bow Shackles with Screw Pin, Generally BS3032

Quality EU Manufactured, High Tensile Small Bow (Omega) Shackles Generally to BS 3032 Table 3, with 'A' pins. WLL Range from 500kg to 9250kg

Model: SBS-3099

Available Capacities : 500kg, 1000kg, 1500kg, 2000kg, 3000kg, 4000kg, 5000kg, 6250kg, 7500kg, 9250kg, 10,500kg, 12,500kg, 14,250kg, 16,500kg, 18,500kg, 20,000kg, 25,000kg, 30,000kg, 35,000kg, 40,000kg, 50,000kg, 65,000kg and 80,000kg.

Shackle Diameters available: 10mm (3/8"), 13mm (1/2"), 16mm (5/8"), 19mm (3/4"), 22mm (7/8"), 25mm (1"), 29mm (1 1/8"), 32mm (1 1/4"), 35mm (1 3/8"), 38mm (1 1/2"), 41mm (1 5/8"), 44mm (1 3/4"), 48mm (1 7/8"), 50mm (2"), 54mm (2 1/8"), 57mm (2 1/4"), 64mm (2 1/2"), 70mm (2 3/4"), 76mm (3"), 79mm (3 1/8"), 89mm (3 1/2"), 102mm (4") and 114mm (4 1/2").

Imperial UNC or BSW Oval Link Eye Bolt to BS4278

Top quality made in the UK, high tensile collared eye bolts with oval link. Manufactured to BS4278 table 5 1984 appendix 'A' with course thread 1/2" to 1-3/4". 250kg to 6.3 tonne lifting capacity.

Model: ITOL-3965

Imperial 8UN Thread Oval Link Eye Bolt Based on BS4278

Top quality UK manufactured high tensile collared eye bolts with oval link, based on BS4278 Table 5 1984 Appendix 'A' with Course Thread 1-1/4" to 1-3/4". 2.5 to 6.3 tonne lifting capacity.

Model: ITOL-3970

LiftingSafety Fall Arrest Inertia Reel Personal Fall Limiter (PFL), 1.8 metre. Designed for MEWP Applications

Personal self-retracting fall arrest inertia reel block with aluminium housing, webbing lifeline and a choice of connectors. Designed for use on mobile elevated work platforms, Conforms to EN360

Model: LDFA-4600

LiftingSafety Double Fall Arrest Inertia Reel Personal Fall Limiter (PFL) - 2 metre

Personal twin leg fall arrest inertia block with aluminium housing, webbing lifeline and optional terminations, Conforms to EN360

Model: IFAI-4599

LiftingSafety Fall Arrest Inertia Reel Personal Fall Limiter (PFL) - From 3.5m to 15m

Personal fall arrest inertia reel block with plastic housing, webbing lifeline and optional terminations, Conforms to EN360

Model: LDFA-4598

LiftingSafety Fall Arrest Inertia Reel Personal Fall Limiter (PFL) - From 3m to 24m

Personal fall arrest inertia reel block with plastic or aluminium housing, wire rope lifeline and optional terminations, Conforms to EN360

Model: LDFA-4597

LiftingSafety Double Fall Arrest Inertia Reel Personal Fall Limiter (PFL) - 1.8 metre

Personal twin fall arrest inertia reel block with aluminium housing, webbing lifeline and optional terminations, Conforms to EN360:2002

Model: IFAI-4596

LiftingSafety Fall Arrest Inertia Reel Personal Fall Limiter (PFL) - 2m, 2.8m or 3.5m

Personal self-retracting fall arrest inertia reel block with aluminium housing, webbing lifeline and a choice of connectors, Conforms to EN360

Model: IFAI-4595

Fork Truck Mounted Lorry Loading Transfer Platform, 1500kg SWL

Fork-lift mounting loading platform designed specifically for carrying out the safe loading and unloading from the bed of a lorry.

Model: LLTP-4543

LiftingSafety Fall Arrest Inertia Reel Block with Retrieval/Rescue Hand Chain Wheel - Galvanised Cable - Options from 12 to 60 metres.

Retractable "self retracting lifeline" (SRL) fall arrest block with chain wheel rescue function. 6 different lengths. Complies to EN360 and EN1496.

Model: FAIR-4529

LiftingSafety Fall Arrest Inertia Reel Block with Retrieval/Rescue Function - Galvanised Cable - Options from 12 to 60 metres.

Retractable "self retracting lifeline" (SRL) fall arrest block. 6 different lengths. Complies to EN360.

Model: FAIR-4528

LiftingSafety Fall Arrest Inertia Reel Block with Galvanised Cable - Options from 12 to 60 metres.

Retractable "self retracting lifeline" (SRL) fall arrest block. 6 different lengths. Complies to EN360.

Model: FAIR-4527

Towable Forklift Salt Spreader

190 litre capacity axle driven (no additional power source required) towable forklift truck rock salt spreader attachment, with a spreading range of up to 8 metres.

Model: FSS-4173

A complementary component for the forklift snow plough attachment, this forklift towable salt spreader is perfect for towing behind vehicles with a standard ball hitch or towing pin. With no electrical or auxiliary connection required to the forklift truck, this mechanically driven forklift salt gritter is simple yet very effective to use for all ice gritting applications.

Heavy Duty "High Capacity" Pallet Truck - 5000kg

5 tonne heavy duty pallet truck - Fork length 1150mm - Higher capacities and special designs available.

Model: HDCP-3985

316 Stainless Steel Lifting Bow Nut with Metric Thread

Top quality UK manufactured stainless steel bow nuts based on BS3974 1974 part 1, with metric course thread (M10 to M36). 360kg to 5340kg lifting capacity options.

Model: MTSS-3973

Our grade 316 stainless steel bow nuts are based upon the British Standard BS3974 and are available in the following sizes and capacities: 360kg (m10), 530kg (M12), 1010kg (M16), 1580kg (M20), 2280kg (M24), 3650kg (M30) and 5340kg (M36). Supplied as standard with metric threads, these bow nuts can be threaded as the customer requires, with such thread types as BSW, UNC or UNF etc...

Metric Thread Collared Eye Bolt with Non-reevable Egg Link

Top quality made in the UK, high tensile collared eye bolts with egg link, with metric course thread M10 to M36. 250kg to 6.3 tonne lifting capacity options.

Model: MTCE-3971

As standard our non-reevable egg link eyebolts are available only with metric thread, however, upon special request, they are available with a variety of other thread forms and pitches, such as UNC and BSW etc... Capacities and thread sizes as standard are: 0.25t (M10), 0.4t (M12), 0.8t (M16), 1.6t (M20), 2.5t (M24), 4.0t (M30) or 6.3t (M36).

Small "D" Shackles with Screw Pin, Generally to BS3032

Quality EU Manufactured, High Tensile Small Dee Shackles Generally to BS 3032 Table 2, with 'A' pins. WLL Range from 600kg to 10,750kg

Model: SDS-3098

Available Capacities : 600kg, 1000kg, 1750kg, 2500kg, 3500kg, 4500kg, 5500kg, 7000kg, 8000kg and 10,750kg.

Shackle Diameters available: 10mm (3/8"), 13mm (1/2"), 16mm (5/8"), 19mm (3/4"), 22mm (7/8"), 25mm (1"), 29mm (1 1/8"), 32mm (1 1/4"), 35mm (1 3/8") and 38mm (1 1/2").

Adjustable Lightweight 'H' Shape Aluminium 4 Point Lifting Beam

1000kg to 3000kg four point aluminium cross beam (lifting beam), with quick snap adjustment system, Up to 3 metre wide and to 5 metre long.

Model: ACB-3093

Fully adjustable with four adjustable rotating safety load hooks. Manufactured from durable and lightweight aluminium. The quick snap adjustment system on the load hooks permits fast adjustment to the required size. Adjustment of the two under-slung cross beams at 50mm intervals. Adjustment on the main lifting beam at 100mm intervals. All parts are made of aluminium or polyamide...

2 Point Lightweight Adjustable Aluminium Lifting Beam

Top quality alloy lifting beams available with a lifting capacity of 1000kg, 2000kg or 3000kg, with specials available on request. 2000mm to 5000mm span.

Model: ACB-3092

Here we are offering top quality (made in Germany) aluminium lifting beams that come with adjustment at 50mm intervals and swivel 2 x safety  hooks. The quick adjustment system on top of the load hooks allow for fast setting and adjustment of the load hooks and all parts are made of aluminium or polyamide (except for bolts and suspension hooks). Available with safe working loads of 1000kg, 2000kg or 3000kg.

Order Picking Trolley, 100kg Capacity

Order Picking Trolley with 600 x 400 x 300mm Plastic Containers and a Clipboard Holder.

Model: OPT-1114

Order Picking Trolley, 100kg Capacity

Order Picking Trolley with 600 x 400 x 300mm Plastic Containers and a Basket

Model: OPT-1113

Order Picking Trolley, 200kg Capacity

Order Picking Trolley with 915 x 460mm Basket.

Model: OPT-1112

Long Tyre Trolley Designed to Carry Tyres Safely Horizontally

Long Tyre Trolley Carries up to 50 Tyres.

Model: LTT-1110

Tall Large Panel Trolley, 500kg Capacity

Large Panel Trolley, Board Size 2550 x 1250mm

Model: LPT-1108

Large Panel Trolley, 500kg Capacity

Large Panel Trolley, Board Size 2550 x 1250mm.

Model: LPT-1107

2 Wheeled Upright Board Trolley

Large Panel Trolley, 300kg Capacity.

Model: LPT-1106

Tyre Trolley Designed to Carry Tyres Safely

Tyre Trolley Carries 10 to 15 Tyres.

Model: HTT-1105

Cage Trolley, 500kg Capacity

High Load Trolley with option of two or three shelves.

Model: CTWS-1103

High Load Cage Trolley, 500kg Capacity

High Load Trolley.

Model: CT-1099

Heavy Duty Moveable Work Bench with Shelf, 500kg Capacity

Heavy-duty wheeled table trolley. 2440 x 936mm table top.

Model: HDTT-1098

Heavy Duty Table Trolley with Storage Shelf, 500kg Capacity

Heavy-duty wheeled table trolley. Various size options available.

Model: HDTT-1095

Heavy Duty Table Trolley, 500kg Capacity

Heavy-duty wheeled table trolley. Various size options available.

Model: HDTT-1092

Balance Trolley, 500kg Capacity, Various Size Options Available

Balance Trolley with Drop Side

Model: BT-1084

Order Picking Trolley with Steps and Shelves

Order picking trolley with for steps and two shelves.

Model: OPT-1115

Portable Swing Jib Crane with 'C' profile lifting Beam - Range from 125kg to 500kg

Portable Swing Jib Crane with concrete counterbalance weight.

Model: PJC-1153

All the same features as the above crane with 'H' beam version though supplied with a light weight 'C' profile track (lifting beam). All these portable swing jib cranes offer a slight variation on the same theme - portability! Having the convenience of a swing jib with the unique ability to be able to move its location with the use of a fork truck or overhead crane. Available in 125kg, 250kg and 500kg each can come with different spans.

Lightweight and Adjustable Aluminium Tripod with Hand Winch and Pulley Sheave - 1000kg SWL

Aluminium lifting tripod with webbing hand winch at 3.7m when erected, 2.4m when collapsed.

Model: ATC-3091

Heavy Duty alloy Tripod, excellent quality, made in Germany; a portable piece of lifting equipment supplied with a 20 metre webbing hand winch. The cable is deflected over a pulley wheel. The tripod has fully adjustable telescopic legs that collapse to a length to 2.4 metre for easy storage and transportation. The tripod feet are fitted with non-slip rubber-metal linings, guaranteeing stability.

Lightweight Aluminium Tripod Crane - 1000kg SWL

Aluminium lifting tripod at 3.5m when erected, 2.2m when collapsed. Hoist not included.

Model: ATC-3090

Heavy Duty Aluminium Tripod designed for portability and great value for money, fully adjustable telescopic legs ideally used with a hand chain block or electric chain hoist. Tripod Features; Greater adjusting range due to telescopic legs than standard lifting tripods and fully Collapsible reducing the overall length to 2000mm for easy storage and transportation. The tripod feet are fitted with non-slip rubber-metal linings, guaranteeing stability.

Aluminium 'A' Frame Lifting Gantry with Twin Top Beams and Castors - 1000kg or 1500kg

Fully adjustable twin top beam, movable under load alloy gantry with folding lateral legs and 2-part top beams.

Model: MULG-3089

30 options; made in German these are top of the range, excellent quality adjustable light weight alloy lifting gantries with twin parallel (double) top lifting beams. Twin overhead lifting beams add increased stability to a gantry system that is designed to permit movement when loaded (load bearing), though most importantly the twin parallel top beams mean that very wide working spans are achievable between the vertical support legs.

Aluminium Lifting Gantry Crane with Castors - 1000kg or 1500kg

Fully adjustable and lightweight alloy gantry with folding lateral legs. Moveable under load with split top beams.

Model: MULG-3088

6 options; top quality German manufactured adjustable light weight alloy lifting gantries; this is our mobile version - with Castor's and movable under load. Movement under load is subject to risk assessment and must be on a suitable, smooth and level surface and be carried out by a competent person. The gantry has vertical adjustable on the central vertical column and also horizontal adjustment that is quick and infinitely adjustable. Each of the legs / vertical supports collapses for ease of transport.

Alloy Lifting Gantry 'A' Frame with Twin Parallel Beams - 1000kg or 1500kg

Fully adjustable double overhead beam, aluminium gantry crane with folding lateral legs, not movable under load. Top beams are supplied as 2-part beams.

Model: DBAG-3086

20 options available. Twin parallel overhead lifting beams offers key features not offered by other lightweight aluminium mobile lifting gantries; we can offer much longer spans than conventional designs (longer distances between legs). The load trolley rests on top of the lifting beams, spreading the load equally between the two lifting beams allowing the hoist to operate in the cavity between the beams and therefore allowing a very high raised height (low headroom). Twin overhead beam design's also enable greater rigidity to the structure.

Metric Thread Collared Eye Bolt with Reevable Egg Link

Top quality UK manufactured high tensile collared eye bolts with egg link, with metric course thread M10 to M30. 250kg to 4 tonne lifting capacity options.

Model: MTCE-3972

As standard our reevable egg link eyebolts are available only with metric thread, however, upon special request, they are available with a variety of other thread forms and pitches, such as UNC and BSW etc... Capacities and thread sizes as standard are: 0.25t (M10), 0.4t (M12), 0.8t (M16), 1.6t (M20), 2.5t (M24) or 4.0t (M30).

Fork Lift Truck Tine Mounted Safety Access Man-Riding Platform with Through-Bars for Access and Egress - 2 Person

Safety Access Basket for up to 2 Persons - Economy Model.

Model: SAP-2710

This fantastic value platform is based on our popular single person WP-SP design, however with a platform size large enough to accommodate two people. Economy model as mass produced, not a reflection of the quality. With a slide up front bar for entry, 500kg SWL, this platform is manufactured and supplied to comply fully with the latest PM28 Health & Safety Regulations. Suitable for use with forks up to 150mm wide x 50mm thick.

LiftingSafety Automatic Evacuation Rescue Descender / Fall Arrest Inertia Reel Block, Aluminium Housing, Steel Cable Lanyard with Snap Hook - 9m, 18m or 30m

Fall arrest block with built-in auto descent function for self-rescue. Conforms to EN360 and EN341.

Model: 1FAD-2680

The IKAR Devices have been specifically developed to offer fall protection and rescue in one, easy to use unit. Working similar to a car safety belt, during normal use the user can move freely whilst the galvanised steel cable lifeline is kept under permanent tension. In the event of a fall the locking system will activate and the internal brake disk will absorb energy to well below the 6kN limit required by the DIN EN 360 standard.
Product features: Easy to use, low-maintenance design. load carrying capacity. > 1 person, 12Skg - max. Various cable lengths available. Shockproof aluminium housing. Single handed, double action hook to connect to the users harness. Double action hook has swivel function to eliminate cable twisting. large carrying and attachment handle.

LiftingSafety Auto Evacuation Descender with Winch to raise / Lower the Casualty - Various Rope Lengths

Controlled Descent Device c/w Integrated Winch. To raise and lower a casualty.

Model: ADWW-2679

IKAR Auto Descender with winch is a sturdy, low maintenance device fitted with a 10mm Kernmantle rope lifeline, terminated with aluminium double action hooks at both ends. The attachment anchorage point on the controlled descent device is a cast swivel eye ø16mm, suitable for connection via a Standard Karabiner type connector, or a Standard Karabiner type connector with an Anchorage Sling. Available in lengths 20m, 40m and custom lengths.

LiftingSafety Adjustable Pole Strap, Work Positioning Lanyard With Snap Hooks. "Adjustable Restraint Lanyard" - Adjusts 0.85 to 1.5m

Adjustable Restraint Lanyard from 0.85 to 1.5 metre. Ideal for MEWP, Man Basket, Scissor Lift and Cherry Picker.

Model: 0AL-2655

Metric Thread Collared Eye Bolt to ISO3266/BS4278

Top quality made in the UK, high tensile collared eye bolts dimensionally to BS4278 table 1 1968 and 1984 with course thread M6 to M80. 100kg to 30 tonne lifting capacity.

Model: CEB-2652

Material: As specified by BS 4278 Hardened and Tempered S.W.L. Shown at 0° (vertical) angle of lift.

Safety Note: Eyebolts under M12 are not recommended for lifting.

316 Stainless Steel Metric Thread Lifting Eye Bolt

Top quality UK manufactured high tensile 316 stainless steel collared eye bolt, generally to the same pattern as BS4278 with course pitch M8 to M36. 150kg to 6.3 tonne lifting capacity.

Model: SSE-2650

Eyebolts under 12mm are not recommended for lifting. Product image for display purposes only. Material: As specified by BS 4278 Hardened and Tempered S.W.L. Shown at 0° (vertical) angle of lift. Other diameters, thread forms and pitches available on application. High tensile 316 stainless steel construction.

Steel 'I' Profile A Frame Mobile Lifting Gantry - Bespoke Gantries Made to Customers Specification, Heavy Duty with 500kg to 5000kg Capacities

I Profile Carbon Steel Mobile Gantry Built to Specification and Potentially Moveable Under Load.

Model: IPMG-2610

I Profile Mobile Gantry’s Built to our customers specification, optional as Bespoke potentially Moveable Under Load, made from carbon steel. We offer three main styles of Mobile gantries: Inner braced - decreases the amount of usable trolley travel / lifting area, Outer braced - gives full width trolley travel though increases the overall width of the gantry and Inner braced with full trolley travel - similar to the first option without reduction in lifting area. Manual mobile gantry cranes are mobile fitted with castors (on wheels) for indoor or outdoor use, painted of galvanised. Painting is 2 layers paint system. Yellow RAL.1028 or to your specification. These gantry's crane can be mobile even under load on a clean floor though subject to user method statement and risk assessment.

'H' Section Portable Swing Jib Crane Overbraced Design - Range from 125kg to 500kg

Portable Swing Jib Crane with Overbraced arm with integrated counterbalanced weight.

Model: PJC-1154

The H-section transportable jib cranes are available as 125kg, 250kg or 500kg SWL, the standard height is 3m under the beam but can be supplied up to 4 metres maximum. Jib features include: delivered with counterweight and 4 adjustable jacks, polyurethane painting RAL. 1028 on a shot-blast structure, paint guaranteed for 24 months according to Re3. Frame structure: FEM 2m.          

LiftingSafety Mesh Box Truck with Lift Off Side, 500kg Capacity, Various Size Options Available

Box Truck - Mesh Lift Off Gate.

Model: MBT-1076

Single Cylinder Lifting Trolley

Trolley designed for lifting and manoeuvring single gas bottles, to suit various sized cylinders between 180 and 305mm. 150kg max. capacity.

Model: SCLT-5533

Stainless Steel Pallet Truck, Capacity 2000kg

AISI 316 Pallet Truck Ideal for use in pharmaceutical, chemical, oil, gas and paint industries.

Model: SSPT-5124

Skid Lifter with Removable Platform, Range 500kg or 1000kg

Manual (foot pump raise operation) high lift pallet truck

Model: SLWR-5066

Heavy Duty Flatbed Trolley, Capacity 500kg or 1000kg

Heavy-duty trolley in various sizes, with different wheel options.

Model: HDFT-5029

Electric Lift & Tilting Pallet Lifter, Capacity 1000kg, Fork size 560 x 800mm

Useful where palletised good are loose small items that need to be picked out one by one.

Model: ETPT-5015

Manual Tilting Pallet Lifter, Capacity 1000kg, Fork Size 560 x 800mm

Useful where palletised good are loose small items that need to be picked out one by one.

Model: TPTT-5014

Aluminium Mobile Scissor Lift Table, 100kg Capacity

Pump Action Foot Pedal Raise and Hand Operated Release (Lower) Trigger

Model: AMSL-4935

Stainless Steel Mobile Scissor Lift Table - Range from 150kg to 500kg

Pump action foot pedal for raising and hand operated release (lowering) trigger.

Model: SSMS-4934

Deluxe 8 Man Crane Slung Rescue Cage

Man-Riding basket with stretcher for emergency evacuation, emergency lights, and full of emergency equipment / accessories

Model: DCSR-4864

Crane Slung Rescue Cage

Man riding basket for up 8 people and 1 stretcher.

Model: CSRC-4863

Mobile and Fixed Steel A-frame Gantry Cranes, Capacities from 125kg to 10.0 Tonne

Made To Your Specifications

Model: BAGC-4861

LiftingSafety Automatic Evacuation Descender Device (No raising Handle) - Various Rope Lengths

LiftingSafety Controlled Descent Device. Automatic descender for automatic controlled descent evacuation when working at height.

Model: LAED-4853

Clamp Mount 'I' Beam Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

RSJ/Column mounted (Clamp Around Column) slewing jib crane with over bracing, with various capacity and reach options.

Model: CMSJ-4804

Wall Mount 'I' Beam Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Wall Mounted Slewing Jib Crane with Over Bracing, with various Capacity and Reach options.

Model: WMSJ-4803

Clamp Mount 'I' Beam Profile, Under-Braced Swing Jib Crane, Range: 80kg to 1000kg

Clamp (Around Column) Slewing Jib Crane with Under Bracing, with various Capacity and Reach options.

Model: WMSJ-4802

Aluminium Fork Mounted Hook

Adjustable Fork Mounted Hook for use on Fork Lift Truck or Telehandler Tines. Capacity options from 1500kg to 6300kg

Model: AFLT-5145

Forklift Gas Bottle Handler, Capacity 500kg

Multi purpose forklift gas bottle lifting frame designed to safely allow gas cylinders to be transported without the need for manual handling.

Model: DCLT-5198

Double Cylinder Lifting Trolley, Cylinder Diameter 180 to 305mm, Capacity 250kg

Twin cylinder trolley designed for lifting and manoeuvring two gas bottles, to suit various sized cylinders

Model: DCLT-5525

Aluminium Cross Beam for Big-Bags - 1000kg to 3000kg Options

Crane slung and forklift truck tine mounted big bag lifting/spreader beam for the lifting and handling of bulk bags.

Model: ACBF-5472

Niko Scaffolding Runway System - 125kg to 2000kg

Runway beam system that connects track directly to scaffold poles enabling the movement of heavy items around a scaffolding structure.

Model: NSRS-5468

• Clamps to existing scaffolding structure creating a runway beam on your existing scaffold.
• Cantilever the beam over the end of the scaffolding.
• Straight track as standard with curved sections (not available for 2000kg systems).
• Junction switch available to change direction of the runway.
• Can be used to suspend a bridge from 2 runway systems to create a crane system
• Supplied in kit form for ease of installation, extension and relocation

Portable Powered/Motorised Gantry Crane - Standard 1000kg to 6300kg Capacity Options. Moveable Under Load

Motor driven mobile gantry crane with mains power or self-contained battery pack options. Standard spans up to 10m and heights up to 6m.

Model: PPMG-5431

Board Trolley, 350kg Capacity

Board Trolley with Side Baskets

Model: LBTC-5425

Aluminium Lifting Gantry Crane with 2-Part Top Beam - 500kg or 1000kg

High quality EU manufactured adjustable alloy A-frame gantry available in multiple height or width configurations.

Model: AALG-5410

Telehandler Attachments

Carrige or fork mounted telehandler attachments

Model: TA-5210

Fork Lift Truck Towing Hitch Attachment

Fork lift attachment for manouvering trailers and caravans.

Model: FLTT-5209

Fork Lift Truck Car Mover Attachment

Simple mechanical operation designed to fit majority of vehicles

Model: FLTC-5208

Fork Lift Truck Brush Type Sweeper Attachments

Versatile forklift sweepers

Model: FLTB-5207

Fork Lift Truck Hydraulic Rotational Sweepers

A quality forklift sweeper that will prove a great asset for all outdoor sweeping duties

Model: FLTH-5206

Fork Lift Truck Magnetic Sweeper Bar Attachment

Ideal for keeping car parks, container depots and warehouses free from metal debris

Model: FLTM-5205

Fork Lift Truck Bag Filler

Fork truck attachment for easy big / bulk bag filling

Model: FLTB-5204

Crane Slung Cylinder Handler, Capacity 500kg

Crane Lift Gas Bottle Lifting Frame

Model: CSCH-5199

Wall Mount 'I' Beam Profile, Under-Braced Swing Jib Crane, Range: 80kg to 1000kg

Wall Mounted Slewing Jib Crane with Under Bracing, with various Capacity and Reach options.

Model: WMSJ-4801

Clamp Mount 'C' Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Clamp (Around Column) Slewing Jib Crane with Over Bracing, with various Capacity and Reach options.

Model: CMSJ-4800

Wall Mount 'C' Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Wall Mounted Slewing Jib Crane with Over Bracing, with various Capacity and Reach options.

Model: WMSJ-4799

LiftingSafety Adjustable Restraint Lanyard with Screwgate Karabiner and Scaffold Hook - 1.5m or 2m length

Adjustable webbing restaint/work positioning lanyard with scaff hook and karabiner connecctors.

Model: LWLW-4627

LiftingSafety Adjustable Restraint Lanyard with Screwgate Karabiners - 1.5m or 2m length

Adjustable webbing restaint/work positioning lanyard with karabiner each end.

Model: LWLW-4626

LiftingSafety Restraint Lanyard with Screwgate Karabiner and Scaffold Hook - 5 choices in length from 1m to 2m

Fixed length webbing restraint/work positioning lanyard.

Model: LWLW-4625

LiftingSafety Restraint Lanyard with 2 x Screwgate Karabiners - 5 Choices in Length from 1m to 2m

Fixed length webbing lanyard for restaint/work positioning.

Model: LWLW-4624

LiftingSafety Stainless Steel Man Riding / Rescue Davit and Accessories, Max. Height: 3231mm & Max. Reach: 1238mm, EN795 Class B

LiftingSafety Stainless Steel Man Riding, Fall Arrest, Rescue Davits

Model: LSSM-4623

LiftingSafety Stainless Steel Man Riding / Rescue Davit and Accessories, Max. Height: 2018mm & Max. Reach: 1233mm, EN795 Class B

LiftingSafety Stainless Steel Man Riding, fall arrest, rescue davit and accessories.

Model: LSSM-4622

LiftingSafety Stainless Steel Man Riding / Rescue Davit and Accessories, Max. Height: 1773mm & Max. Reach: 1238mm, EN795 Class B

LiftingSafety Stainless Steel Man Riding, fall arrest, rescue davit.

Model: LSSM-4621

LiftingSafety Stainless Steel Man Riding / Rescue Davit and Accessories, Height: 2276mm x Reach: 1036mm, EN795 Class B

Stainless steel man-riding, fall arrest rescue davit with optional winch and a choice of fall arrest blocks.

Model: LSSM-4620

LiftingSafety Double Action Aluminium Swivel Scaffold Hook. Opening 70mm

Aluminium dual action scaffold hook connector with built-in swivel. 28kN rating.

Model: LAK-4619

LiftingSafety Double Action Aluminium Scaffold Hook. Opening 60mm

Aluminium dual action scaffold hook connector. 22kN rating.

Model: LAK-4618

LiftingSafety Large Double Action Aluminium Scaffold Karabiner. Opening 55mm

Large aluminium double action twist lock scaffold hook karabiner. Supplied iwth captivating pin. 25kN rating.

Model: LAK-4617

LiftingSafety Large Double Action Steel Scaffold Karabiner. Opening 57mm

Large steel dual action scaffold hook karabiner. Supplied with captivating pin. 35kN rating.

Model: LAK-4616

LiftingSafety Large Double Action Steel Scaffold Karabiner. Opening 54mm

Large steel dual action twist lock scaffold hook karabiner. 35kN rating.

Model: LAK-4615

LiftingSafety Double Action Swivel Snap Hook. Opening 27mm

Aluminium dual action swivel snap hook connector. 28kN rating.

Model: LAK-4614

LiftingSafety Restraint Lanyard with Double Action Snap Hooks - Choice of lengths from 1m to 2m

Fixed length webbing restaint/work positioning lanyard with double action snap hooks.

Model: LWLW-4628

LiftingSafety Adjustable Restraint Lanyard with Double Action Snap Hooks - 1.5m or 2m length

Adjustable length webbing restraint/work positioning lanyard with double action snap hooks.

Model: LWLW-4629

Free Standing 'I' Beam Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Column Mounted Slewing Jib Crane with overbraced arm, with various Capacity, Height and Reach options.

Model: OBSJ-4798

Free Standing 'I' Beam Profile Under braced Swing Jib Crane, Range: 80kg to 1000kg

Column Mounted Slewing Jib Crane with Under Bracing, with various Capacity, Height and Reach options.

Model: UBSJ-4797

Free Standing 'C' Track Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Column Mounted Slewing Jib Crane with Over Bracing, with various Capacity, Height and Reach options.

Model: OBSJ-4796

Wire Rope Lifting and Pulling Winch / Hoist. Single Phase 230v, Range from 90kg to 300kg

A potable electric lifting and draw winch with automatic wire rope insertion for unlimited working heights.

Model: WRLP-4795

Aluminium "Multilift" Counter Balance Lifting Crane, 250kg Capacity

Lightweight Aluminium Counterbalanced Floor Crane with Changeable Extension Arm and Lifting Forks and 2 Part Counter Balance Trolley with Counterweight.

Model: AMFC-4732

Aluminium "Multilift" Lifting Crane with Front Stabalising Legs

Lightweight aluminium fixed column floor crane with changeable extension arm and lifting forks, and fold-up stabiliser legs, 250kg capacity

Model: AMFC-4731

LiftingSafety Adjustable Rope Restraint Lanyard with Scaffold Hook and Snap Hook - Length 1.5 or 2m

Kernmantle rope adjustable restraint/work positioning lanyard with aluminium double action scaffold hook and snap hook.

Model: LWLW-4638

LiftingSafety Kernmantle Rope Restraint Lanyard with Scaffold Hook and Snap Hook - 5 Choices in Length from 1m to 2m

Fixed length rope restraint/work positioning lanyard with aluminium dual action scaff and snap hook.

Model: LWLW-4636

LiftingSafety Kernmantle Rope Restraint Lanyard with 2 x Snap Hooks - Choice of Length from 1m to 2m

Fixed length rope restraint/work positioning lanyard with aluminium double action snap hook each end.

Model: LWLW-4635

LiftingSafety Kernmantle Rope Adjustable Restraint Lanyard with Scaffold Hook and Karabiner - Length 1.5 or 2m

Adjustable kernmantle rope restraint/work positioning lanyard with scaff hook and karabiner.

Model: LWLW-4634

LiftingSafety Kernmantle Rope Restraint Lanyard with Scaffold Hook and Karabiner - 5 Choices in Length from 1m to 2m

Fixed length rope restraint/work positioning lanyard.

Model: LWLW-4633

LiftingSafety Kernmantle Rope Restraint Lanyard with 2 Karabiners - 5 Choices in Length from 1m to 2m

Fixed length kernmantle rope restraint/work positioning lanyard.

Model: LWLW-4632

LiftingSafety Adjustable Restraint Lanyard with Snap Hook and Scaffold Hook - Webbing Length 1.5m or 2m

Adjustable webbing restraint/work positioning lanyard with aluminium double action snap and scaffold hook.

Model: LWLW-4631

LiftingSafety Webbing Connector Lanyard - Webbing Length 0.5m

Web connector strop lanyard for connection of a harness to retractable lifeline.

Model: LWLW-4630

LiftingSafety Double Action Snap Hook. Opening 17mm

Steel double action snap hook connector. 22kN rating.

Model: LAK-4613

Fork truck Mounted Hydraulic Super Scoop Attachments. 200 litres or 500 litres - Range from 1500kg to 2000kg

Fork Mounted Hydraulic Super Scoop from 200 litres to 500 litres or 1.5 tonne to 2 tonne

Model: HSS-628

This fork mounted hydraulically operated super scoop requires auxiliary hydraulic valve on fork truck to operate.

Fork Mounted Man Riding Access Platform Attachment. 1 or 2 Person, and Optional Means of Entry

Standard Range 1 or 2 Person Fixed Back Fork Mounted Access Platform from 800mm to 1220mm Platforms, with Gate Option

Model: HBAB-546

Fork Mounted Hinged Back Access Basket comes with harness rails fitted as standard on all cages, fold down back to ease storage and transport. Available with 4 different gate positions: front, left Gate, lift up bar and step through bars.

Fork Mounted Heavy Duty "Ultimate" Top of The Range Access Platform With Castors and Other Great Features Inc Side Gate- 2 Persons

Top of the Range 2 Person Fork Mounted Access Platform with a 1000mm by 1200mm Platform.

Model: UAP-547

Fork Mounted Ultimate Access Man-Riding Platform comes with a tool tray, clip-board and a strip light bulb holder. With auto-locking and unlocking to the truck and safety harness. One side positioned gate with a platform size of 1000 x 1200mm.

Fork Truck Mounted "Raised Platform" Access Basket. 500 to 1000mm Lift. 3 Gate Options - 1 or 2 Person Options

Access Raised Platform for 1 or 2 People with Platforms from 800mm to 1200mm.

Model: RAP-549

Fork Mounted Raised Access Man-Riding Platform is raised up on legs to give extended height for accessing high racking, roof lights, buzz bars etc. where truck lift height is limited. Available with 2 different raised heights of 500mm and 100mm, with different entry gates: lift up front bar, through bars, front gate and left side gate.

Crane Slung Man-Riding Access Basket Attachment. 2 Gate Options, 3 sizes - 2 to 6 Person Options

Man-riding Crane Slung Access Platform for 2 or 6 People (Three sizes) c/w Lifting Chain slings. Fork pockets for transportation only.

Model: CSAB-550

Crane Slung Man-Riding Access Basket comes supplied with chains, one safety harness and overhead guard. The basket has been designed to be used either slung from the hook of an overhead crane. Available in either 2 or 6 person models: 2 person, either side gate or through bars. 6 person only comes with side gate but with different platform sizes. The overall base size of the unit is 1500mm wide x 1100mm deep. The unit will have a fully meshed back panel, and the three other sides will be meshed to the middle rail. Entry to the platform is via an inwards opening gate on the one 1100mm side. Gate is self-closing and has a gate arrester to prevent the gate being opened when the platform is elevated.

Crane/Hook Slung "Semi Automatic" Drum Lifting Device - 500kg or 1000kg

Drum Lifting tongs for use with a forklift hook/yoke or crane/hoist hook.

Model: SADT-552

This may be fitted under a fork mounted hook, fork or carriage mounted jib, or under an overhead or lorry mounted crane. This is semi-automatic in operation. This drum lifter is used for picking up 210 litre drums of the tight-head or open topped steel varieties. Simple but effective drum handling.

Overhead Crane Hook Suspended "Fully Automatic" Drum Tongs Lifter - 360kg, 500kg or 1000kg

Fully automatic drum lifting tongs for use with a forklift truck yoke or hoist hook.

Model: FADT-553

This is designed for handling 210 litre drums of the steel tight head, open topped, L Ring plastic or Mauser varieties. Operation is fully automatic allowing the truck operator to complete the whole operation without leaving his seat. This may be fitted under a fork mounted hook, fork or carriage mounted jib. Vital piece of drum handling equipment when positioning drums.

Automatic Drum Grab, Fork Truck Attachment to Suit 1 or 2 Drums - 250kg to 1000kg

Fork Mounted Drum Grab with 2 Drum Options.

Model: FMDG-555

The entry level drum grab has been designed especially for the handling of steel drums with rolling hoops. It is a very simple to use fully automatic operation, which has quick slide two position adjustment to allow handling of 210 litre steel drums with rolling hoops or 210/220 L or XL plastic drums. This drum handler is designed for handling 210 litre steel oil drums with rolling hoops, where contents have high mass to volume ratios, such as powders, metals, etc.

Fixed Position Fork Lift truck Mounted "Lifting Hook" to Position on Forklift Tines, Fixed to the Heel Of the Forks - Range From 1000kg to 5000kg

Fixed fork mounted hook attachment.

Model: FFMH-616

This is a simple and cost effective means of converting your forklift truck into a mobile crane. With anchor bars at the back of the attachment lock behind the heels of the forks to prevent movement of the attachment.

Carriage Mounted Telescopic Extender Jib. Telescopic Action By Hydraulic Ram - Range From 210kg to 1600kg

Hydraulic Telescopic Jib.

Model: HTJ-614

This Model of Carriage Mounted Extender Jib is fitted with a hydraulic cylinder to enable the telescopic inner beam to be positioned with ease without the need for the forklift operator to leave his seat. The inner beam can be positioned infinitely between 1250mm - 2000mm. Lifting points under the fixed section of the beam run from 500mm to 1000mm at 250mm increments. This Crane Jib is provided with two hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load. Requires 1 double acting hydraulic service on the fork truck.

Carriage Mounted "Carrimax Jib" Quick Fit Fork Lift Truck Attachment - Range From 560kg to 8000kg

Carrimax fork mounted jib arm.

Model: CJ-613

This Crane Jib often referred to as a swan neck jib can increase the versatility of your fork lift truck through the gain in lift height. This style of carriage mounted jib is again fitted with our simple to fit carriage mountings. The mountings simply hook over the carriage and bottom blocks clasp the jib in place. Bolt on or quick release bottom blocks are available.

Carriage Mounted Fixed Length High Lift Jib Attachment. Hook Position Adjustable

High lift jib arm attachment that mounts directly to the fork lift truck, in place of the fork tine carriage.

Model: HLJ-612

This carriage mounted jib is designed for where greater lift height is required. This swan neck jib is supplied complete with hook and shackle. Available with quick release hangers.

Fork Lift Truck Carriage Mounted Economy Lifting Jib - Range From 200kg to 2700kg

1200mm Economy Jib.

Model: EJ-611

A single-hook-position low cost jib generally tailor-made to suit handling of a specific product. Ideal for tasks such as engine removal, tool changing etc. This particular forklift jib is rated accordingly to suit a 1000kg forklift truck, thus giving you piece of mind that this is the correct size forklift jib for the lifting capacity of your forklift truck.

Fork Lift Truck Carriage Mounted Manual Telescopic Extending Jib Attachment - Range From 210kg to 4000kg

Carriage Mounted Jib.

Model: CMJ-610

A manually extending jib which mounts your fork lift truck. Allows the versatility of manoeuvrability of a shorter reach jib. Quick Release Bottom Hangers also available. Available for DIN (square plate) carriages.

Fixed Length Fork Lift Truck Carriage Mounted "Easi Reach" Jib with Adjustable Hook Position - Range From 200kg to 7400kg

Easi Reach Jib with a maximum hook reach of 1750mm. Overall length 1800mm.

Model: ERJ-609

Fork Tine Mounted Articulating Telescopic "Extender Jib" c/w 45 Degree vertical Articulation - Range From 230kg to 4000kg

Articulating Telescopic Jib.

Model: ATJ-608

This Articulating Jib has been specially designed to handle loads at varying heights. The telescopic inner beam has a reach of 2500mm Closed and 3000mm Extended. The special Frame assembly allows the beam to be angled to a maximum of 45 degrees at 15mm increments. This attachment is ideal for use on building sites lifting roof trusses.

Adjustable Forklift Truck Mounted Hook / Yoke - Range From 1000kg to 5000kg

Fork mounted hook with adjustable bolt action that fastens to the forklift tines.

Model: AFMH-617

This is the most cost effective way of safely hanging a load under the forks of your lift truck, it just simply clamps onto the forks anywhere along their length.

'Open Base' Fork Lift Truck Tine Extensions, Length Range from 1500mm - 2000mm

Manufactured to conform to ISO 13284 British Standards

Model: OBFE-618

"Triangular Shaped" Fork Truck Tine Extensions with "Open Base" for Picking Up Cylindrical Loads - Range from 1525mm to 1830mm

Triangular Fork Extensions.

Model: TFE-619

This enables safe carrying of cylindrical loads without them falling off as they just slip over the forklift truck forks.

Manual Lever Action Tipping "Easyfill Scoop" Fork Lift Truck Attachment. Materials Lifting Bucket. 200 Litre to 500 Litres

Easyfill Scoop Fork Truck Attachment from 0.2m3 to 0.5m3.

Model: ESA-627

This compact design scoop with easy filling characteristics and good manoeuvrability. The fork mounted scoop is ideal for handling building materials.

"Rubble Master" Fork Lift Truck Mounted Roll Forward Skip.1200 Litres - 1500kg

Rubble Roll Forward Skip.

Model: RS-532

This Rubble skip is designed specifically for the rigours of the plant hire and construction market. This is a heavy construction with reinforced edges and a 5mm thick body. Extra strong base frame and lock assembly.

Fork Truck Mounted Stainless Steel "Foodmaster" Roll Forward Skip. 250 Litres to 2000 Litres - 1000kg to 1500kg

Stainless Steel Roll Forward Skip.

Model: SSS-534

This fully stainless steel skip is designed for use primarily in the food and drinks industry, where corrosion resistance and the immunisation of contamination is vital. Every part is manufactured from A grade stainless steel, making it suitable for pressure washing or steam cleaning. A must for disposal of waste in clean environment.

Semi Stainless Steel Fork Truck Mounted Roll Forward Skip Fork Truck Attachments. 250 Litres to 2000 Litres - 1000kg to 1500kg

Semi Stainless Roll Forward Skip.

Model: SSS-535

The regular range of Roll Forward Skips with steel underframe, but fitted with a body manufactured from stainless steel. Its corrosion resistance makes it ideal for handling wet or corrosive products or for use in a harsh environment.

"Four Fork" Fork Truck Attachment. Adjustable Tines (Variable Width) Made to Customers Specification

Adjustable four fork forklift truck attachment standard and bespoke options available.

Model: FFA-626

This is designed for use when handling extra wide loads where the pallet width varies or where the pallet bearer position varies substantially, the outer forks can be moved in or out to suit the variations in pallet or load. The attachment fork length must not exceed the truck forks length by more than 50%.

"Six Fork" Fork Truck Attachment, Fixed Tines (Not Adjustable) Made To Customers Specifications.

Six Fork Attachment.

Model: SFA-625

This is designed to increase the load stability when handling extra wide pallets or products, or to carry three pallets alongside each other. The truck forks slide into the inner sleeves and the 4 outer forks support and balance the load for safety and the reduction of production damage. The attachment fork length must not exceed truck fork length by more than 50%.

Low Loading Fork Truck Mounted Skips 180 Litre to 1500 Litres - 840kg to 1200kg

Low Loading Skip for use on a forklift truck or telehandler.

Model: LLS-537

This short skip has been designed with a very short overall height to fit into spaces where height is restricted. Ideal for use as a swarf bin, scrap bin, machined parts or blanks container. It is fitted with a safety chain for securing to the truck.

"Four Fork" Forklift Truck Attachment, Fixed Tines (Non-Adjustable) Made To Customers Specification

Four Fork Attachment.

Model: FFA-624

This is the solution to wide load handling. This is designed for use when handling extra wide pallets or long product such as steel or plastic pipes, steel flats, plastic extrusions or timer. The truck forks slide into the inner sleeves and the outer forks support and balance the load for safety and the reduction of product damage. The attachment fork length must not exceed the truck forks length by more than 50%.

Fork Truck Mounted Manual Base Emptying Stillages 500 Litre to 1500 Litres - 1000kg to 1500kg

Base Emptying Stillage for use on a forklift truck or telehandler.

Model: BES-539

A simple but effective means of collecting, moving and safely dumping factory waste. These bottom dropping boxes dump the waste through the base, which opens by a means of a pull cord. The base automatically re-locks when lowered. Can be supplied with castors or lids, when fitted with standard feet they can be stacked like waste stillage.

Fork Truck Tine Protection Sleeves, Polyurethane Coated, Sleeve Length Range from 1300mm to 1900mm

Fork Protection Sleeves.

Model: FPS-623

These are designed to slip over the truck forks to prevent marking or damage of the product. A range of heavy duty sleeves, with a 3mm spray coating of polyurethane. Only available in pairs.

Auto Dumping Box Fork Truck Attachments. 500 Litres to 2000 Litres - 1000kg to 1500kg

Auto Dumping Boxes.

Model: ADB-540

They operate automatically when lowered against the side of a waste skip allowing the contents to be dumped without the driver leaving his seat.

Fork Mounted Small Wheelie Bin Handler - 200kg or 90 Litre to 240 Litres

Small Wheelie Bin Handler.

Model: SWBH-545

Wheelie bins are a very popular choice for waste handling in the working environment. While their lightweight mobile design can make positioning and moving over short distances easier, it is often difficult to dispense the contents into a larger waste container ready for collection. This is where our wheelie bin handling attachments come in.

Fork Lift Truck Tine "Coil Support" Attachment Closed base Design - 1525mm to 1830mm

Coil Support Attachment.

Model: CSA-622

The forklift coil lifter slips over both forks simultaneously to give greater bearing area for the carrying of larger steel coils, rolls of wire, sheet polythene etc. Through use of this forklift coil attachment, product damage to the internal core of the rolls caused by the forklift forks can be reduced and prevented. This particular forklift coil lifter is designed to slip over 100mm wide forks (pushed together) giving a total length of 1525mm.

"Radius" (Round Top) Fork Lift Truck Tine Extensions with "Open Base" - Range from 1200mm to 1500mm

Radiused Fork Extensions to Protect Against Damage caused By Square Edges On Standard Tines.

Model: RFE-621

Slip over forks to increase the load bearing areas to allow loads such as small steel coils, coils of wire, plastic etc. to be carried without fork edges causing damage.

'Closed Base' Fork Lift Truck Tine Extensions, Length Range from 1200mm to 2250mm

Fork Extensions with full length bracing along the base which prevents the extension rising up the fork when a load is applied to the tip

Model: CBFE-620

Fixed Length Fork Tine Mounted "Maxi" Lift Jib Attachment with Adjustable Hook Position - Range From 200kg to 9200kg

Maxi Lift Jib.

Model: MLJ-607

Fully Automatic Fork Truck Mounted Mauser Drum Grab For single or Twin Drums - 360kg and 760kg

Mauser Drum Grab Fork Truck Attachment.

Model: MDG-556

This is a fully automatic operation, secured to the truck by fork pockets and screw clamps. Designed for use with 210 litre Mauser open top and tight head egg shaped plastic drums. The arms close automatically around the base of the drum holding it securely during transportation. Available as a single drum rotator or double.

Fork Truck Mounted Multi Purpose Wheelie Bin Rotator for Waste Transfer To Larger Skips - 360kg

Drum and Bin Rotator.

Model: DBR-578

This is designed for use in areas where drums and wheelie bins are used, this drum rotator has a special girdle that allows both to be clamped around their mid points and rotated. It can be rotated by means of either a Crank handle or Loop chain. Can handle 210 litre drums and 120/240 litre wheelie bins. The Bin/Drum is located in the girdle by a ratchet and webbing strap.

Fork Lift Truck Mounted Sideways Drum Rotator, Single Drum. Rotation Types: Loop Chain, Crank Handle or Hydraulics - 360kg

Sideways Rotation Drum Rotator with optional operation types (loop chain, crank handle or hydraulics).

Model: SDR-577

This is the ideal attachment for narrow-aisle operation, designed to slide on to the forks of a fork truck, fixed positively into the attachment using a steel over-centre clamp. Available with many different options : Single steel drum with crank handle, loop chain or hydraulic. Twin steel or plastic drum with crank handle, loop chain or hydraulic.

Fork Truck (and Overhead Crane) Mounted Manual Drum Rotator. Rotation by Crank Handle - 360kg

Crane Slung or Fork Mounted Drum Rotator with optional clamping methods (over centre clamp/twin harness).

Model: DR-576

Universally flexible this rotator can either be mounted directly onto truck forks via fork pockets or can be slung under a hook or crane. Ideal for use where trucks and emptying heights can be variable. Will handle Steel or L Ring Plastic Drums, this drum rotator allows a complete 360 degrees rotation in either direction. Rotation is achieved by means of a crank handle.

Fork Lift Truck (and Overhead Crane Slung) Capstan Operated Crane Slung Drum Rotator - 250kg

Capstan Drum Rotator.

Model: CDR-575

This is a simple and effective way to turn over a 210 litre steel drum allowing the contents to be emptied. Operated by a detachable handle, Designed with the sole purpose to handle full drums only.

210L Universal Fork truck Mounted (and crane slung) Drum Rotator. Rotation by Crank Handle or by Loop Chain - 360kg

Crane Slung or Fork Mounted Universal Drum Rotator.

Model: UDR-574

This is the perfect solution for the rotation of drums where the drums you are using are of mixed variety. Designed to handle any type of drum including fibre, plastic or steel, in 110 or 210 litre sizes. Can be used on a fork truck or overhead crane. Available in 4 drum types : Steel Drum, L Ring Plastic, Fibre (110 litre) and Egg Shaped Plastic Drum. Each is available with Crank Handle or Loop Chain.

Heavy Duty Fork Mounted (and Crane slung) Drum Rotator. Rotation by Loop Chain or Crank Handle - 1000kg

Heavy duty crane slung or fork mounted drum rotator with loop chain or crank handle operation.

Model: HDDR-573

This is a heavy duty steel girdle fitted with two over centre clamps ensuring the drums are gripped firmly at all times. A heavy duty version of the crane-slung drum rotator, designed purposely for handling 210 litre steel drums, containing heavy products such as powder, scrap, lead steel components. Can come with Crank Handle or Loop Chain.

Fork Truck Mounted (and Crane Slung) 110 Litre Drum Rotator Designed for Pouring Liquids. Rotation By loop Chain or Crank Handle - 200kg

Crane Slung or Fork Mounted Drum Rotator.

Model: DR-572

A crane slung drum rotator attachment, with fork pockets for alternative use on a forklift truck. Designed to pour a liquid from one 110 litre to another. Rotation can be manually operated by Crank handle or a Continuous loop chain. The drum is fixed in via a single ratchet and webbing strap.

Top Mount Fork Truck Mounted (and Crane slung) Drum Rotator. Rotation Types: loop chain, crank handle or hydraulics - 360kg

Crane Slung or Fork Mounted Drum Rotator.

Model: DR-571

Crane Slung Drum Rotators are designed for controlled manual rotation of 210 litre drums, the attachment is slung under a crane, small fork pockets are fitted for use with a forklift truck. The gearbox allows controlled pouring and rotation through a full 360 degrees. Variations of girdle types are available to suit either steel or plastic drums. There is also a model for heavier drums of powder, scrap etc. As well as a model to suit 110 litre drums.

Fork Lift Truck Mounted "Raised" Automatic Drum Grab to Lift 1 or 2 Drums - 500kg or 1000kg

Raised Drum Grab Fork Truck Attachment with 1 or 2 Drum Options.

Model: RDG-557

This drum grab allows the handling of both steel and L or XL Ring plastic drums. The raised position of the arms gives improved visibility and increases lift for the plastic drums. Simple side action adjustment allows switching between both styles of drums.

Fork Truck "Carriage Mounted" Automatic Steel Drum Grab to Lift 1 or 2 Drums - 500kg to 1000kg

Single or Double Carriage Mounted Drum Grab Fork Truck Attachment.

Model: CMDG-558

Fork Mounted 110 Litre Steel Drum Rotator for Dispensing Liquid with Control. Rotation by Loop Chain or Crank Handle - 200kg Capacity

Drum rotator with a choice of operation types (loop chain/crank handle).

Model: DR-570

The gearbox allows a full 360 degrees rotation and precision controlled pouring. The drum is fixed to the attachment by a single webbing harness and ratchet. Designed for manually controlled rotation for the 110 litre steel drums. Slides simply onto the forks of a forklift truck. Available with either a Crank Handle or Loop Chain.

Fork Lift Truck Low Profile 210 Litre (Steel) and 210/220 Litre (Plastic) Drum Rotator. Suitable for Pouring Liquids. Rotation Types: - 360kg Capacity

Forklift tine mounted drum handler with various operation methods (loop chain, crank handle or hydraulic) to suit 210L steel or 210 / 220L 'L' and 'XL' plastic drums

Model: DR-569

This slides on the fork blades of a forklift truck, designed to handle 210 steel drums. The drum is fixed directly on to the attachment using a steel over-centre clamp. Fitted with a heavy duty gearbox for precise and controlled pouring. Rotation can be carried out either by a Crank handle (below shoulder height operation) or a Continuous loop chain (above shoulder height operation) or Hydraulics.

Non Marking, adjustable Drum Grab Fork truck Attachment. For Drums from 460mm to 710mm Diameter - 680kg

Heavy-duty automatic gripping drum grab fork truck attachment.

Model: AGDG-559

This heavy duty grum grip has a bonded rubber lining in each jaw, giving positive grip without marking the drum. The jaws can be adjusted manually to fit the drums or cylinders from 460mm to 710mm diameter.

Rim Grip Drum Handler Fork Truck Attachment to Suit 1 or 2 Drum lifting - Range from 750kg to 2250kg

Rim Grip Drum Handler with 1 or 2 Drum Options.

Model: RGDH-561

The drum handler to choose for handling drums packed tightly together. This model is available with a mild steel frame and a zinc plated head as standard, which is suitable for most applications. It is also manufactured completely from stainless steel, which makes it suitable for use in the food and drink processing industry. Rubber Cushioned support base available. Suitable for all drums including fibreboard. Reduces damage to drums.

Drum Positioner Fork truck Attachment With Manual Release Lever to Suit 1 or 2 Drums - Range from 400kg or 800kg

Fork Mounted Drum Positioner with 1 or 2 Drum Options

Model: DP-566

This is a unique means of manipulating drums from horizontal to vertical and vice-versa without leaving the seat of the fork truck. Completely mechanical in operation, it can be used for transporting drums and for unloading and loading vehicles, drum stands, drum racks etc. This is the ideal attachment for advanced drum positioning.

Fork Truck Mounted Drum Dumper Solution for Waste Removal / Transfer - 500kg

Drum Dumper Fork Truck Attachment.

Model: DD-579

This is used in conjunction with 210 litre steel drums, this attachment offers an efficient solution for containment and removal of scrap steel or swarf from a workshop. Steel drums can be picked upward from alongside machines, transported to the trash skip and dumped without any manual handling. Grips the drum tightly using an over-centre steel clamp and girdle. This is ideal for drum dumping.

Fork Lift Mounted "Grip and Tip Function" Hydraulic Operated Multi-Grip Drum Handler - 900kg

Multi-Grip drum handler for transportation and dumping of drums.

Model: VDH-581

This is fork mounted and runs off a double action hydraulic service on the truck. The multi-grip features hydraulic gripping as well as dumping capabilities and allows easily controlled forward dumping up to 125 degrees. May be supplied with two different sets of rubber-lined jaws for handling steel and fibre drums. Can come with either a standard jaw which holds only steel drums, or a Giant jaw which can hold L Ring plastic, Fibre 110 litre, or Egg shaped plastic drums.

Fork Truck Mounted Hydraulic Drum Handler "Grip only Function". Uses Truck Hydraulics. Available as 1 or 2 Drum capability - 900kg

Max-e-Grip Drum Handler with 1 or 2 Drum Options.

Model: MDH-582

This is a single function hydraulically operated drum grip designed for steel drums only and for stacking drums vertically. Has rubber lined jaws allowing handling of drums between 305mm and 600mm, also gives the operator the choice to be able to handle drums over rough terrain. Lift truck powered requiring that the truck is fitted with an auxiliary valve.

Fork Lift Truck Tine Mounted Short Reach Telescopic "Extender" Jib Attachment With 2 Hooks - Range From 210kg to 3500kg

Twin Hook Telescopic Extender Jib.

Model: TEJ-605

This Mini Extender Jib Retains all the functionality of the Fork Mounted Extender Jib Except the reach has been shortened. This allows manoeuvrability in confined spaces while still retaining a long extended reach. This Jib is provided with two hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load.

ForkLift Truck Tine Mounted Manually Adjusted Telescopic "Extender" Jib Attachment - Range From 210kg to 2700kg

2m to 3m Telescopic Extender Jib with secondary removable hook.

Model: TEJ-604

This fork mounted extender jib has all the features of the standard fork mounted jib but has the added functionality of a telescopic inner beam that allows for longer loads to be handled. The increased reach also allows loads to be lifted from otherwise inaccessible locations. This Jib is provided with two swivel hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load.

Fork Lift truck Mounted "Tele-Liner" Jib Attachments - Range From 210kg to 4400kg

Tele-liner Jib.

Model: TJ-603

Low Liner Jibs are ideal for handling un-palletised long loads such as scaffolding poles & bundles of wood. Mounting the beam in between the fork pockets lowers the weight and cost of the jib as well as giving it the added functionality of being low profile and therefore allowing access to confined areas. Models are available to suit trucks up to 5000Kg capacity. Fork pockets allow easy fitment to the forklift forks. Heel fixing retention gives positive locking onto the fork blades.

Fork Lift Truck Mounted Cross Beam Jib Lifting Attachment - Capacity 500kg/2000kg

Cross Beam Jib.

Model: CBJ-602

Fixed Length Fork Lift Truck Mounted Jib - Range From 200kg to 5000kg

Raised Height Fork Mounted Jib.

Model: FMJ-601

This is a fixed length crane jib which mounts onto the forks of any truck. The ideal attachment for lifting and conveying loads which are not suitable for, or do not require palletising. Supplied C/W hook and shackle which can be moved to any suitable lifting position.

Fork Truck Mounted "Low Liner" Jib Lifting Attachment - Range from 230kg to 4400kg

Low Liner Jib for mounting directly to a forklift trucks tines.

Model: LLJ-600

Low Liner Jibs are ideal for handling un-palletised long loads such as scaffolding poles & bundles of wood. Mounting the beam in between the fork pockets lowers the weight and cost of the jib as well as giving it the added functionality of being low profile and therefore allowing access to confined areas. Models are available to suit trucks up to 5000Kg capacity.

Fork Lift Truck Carriage Mounted Paper Reel Lifting Tines. 70mm Diameter Pins - 1000kg

Paper reel handling tines for mounting directly to a forklift trucks carriage.

Model: PRT-599

Designed for handling of horizontally positioned paper reels.

Fork Lift Truck Carriage Mounted Big Bag Tines. 70mm Diameter Pin - 1000kg or 2000kg

Carriage mounted tines for lifting and moving of big / bulk bags

Model: BBT-598

This is designed for handling standard big bags, this carriage mounted attachment gives increased lift height, the tines being set at the top of the carriage plate. The bags are picked up by pushing a tine through the loops on each corner of the bag. Handle stops prevent the bag from moving forwards during transportation.

Fork Lift Truck Low Profile Boom Attachment - To Suit Your Requirements

Fork Truck Drive-In Boom Attachment, Boom Lengths 1000mm to 4000mm, Booms Dia. 50 to 200mm

Model: LPBA-597

Designed for high or low capacity applications, this boom as with the 'Clearview' boom allows a fast changeover from pallet to roll handling, but with the added advantage of a low profile.

Fork Lift Truck Clear View Boom Attachment - To Suit Your Requirements

Fork Truck Drive-In Boom Attachment, Boom Lengths 1000mm to 4000mm, Booms Dia. 50 to 200mm

Model: FTBA-596

This is mounted directly onto the forks and is achieved in seconds, ideal for roll handling. This attachment is the solution when a changeover from pallet handling to handling of coiled or rolled products is required, and time is at a premium.

Fork Lift Truck Carriage Mounted Coil / Roll Boom Attachment - To Suit Your Requirements

Coil Lifting Boom that mounts directly on to a fork truck carriage (class 1 to 5), Boom Lengths 600 to 2000mm, Boom Dia. 50 to 150mm

Model: CMCB-595

This carriage mounted pole can be fitted with Quick mount bottom hangers at an extra cost. This is designed for handling reels, coiled, rolled or cylindrical products such as steel coils, reels of wire and concrete pipes.

Fork Lift Truck Carriage Mounted Carpet Boom Attachment - To Suit Your Requirements

Carpet Boom that mounts directly on to a fork truck carriage (class 1 to 5), Boom Lengths 2000 to 4000mm, Boom Dia. 65 to 150mm

Model: CMCB-594

This is ideal for carpet lifting because this carriage mounted boom allows rolls to be moved with ease. Designed for handling carpets and all other types of floor covering or similar rolled materials. A heavy duty range of carpet pole manufactured from high grade EN24T steel with fully threaded pole construction. Mounts directly onto the carriage of the fork truck. Available in two different classes.

Fork Lift Truck Mounted Stainless Steel Automatic Drum Grabs. Option for One or Two Drums - 500kg or 1000kg

Stainless Steel Drum Grab with 1 or 2 Drum Options.

Model: SSDG-592

The entry level drum grab designed solely for handling steel drums with rolling hoops. Ideal for use with low to medium volume movement of drums around the factory or store. This is manufactured entirely from stainless steel and has a fully automatic operation. Available for use with Steel Drum or L Ring Plasting drum.

Trolley Mounted "Raptor" Drum Truck with Rim Grip Lifting Action - 450kg

Steel manual operation, manually manoeuvred drum truck.

Model: RDT-586

The RAPTOR employs a 'rim grip' style grab that is able to handle virtually any kind of drum. The RAPTOR is fitted with 150mm polyurethane wheels, the rear one of which is equipped with a brake for added safety. Handles 110 or 210 litre drums. Lifting and lowering is carried out hydraulically.

Trolley Truck Mounted "Versa Lift" Manually Manoeuvred Floor Operated Drum Stacker Overall Height up to 2285mm - 360kg Capacity

Versa Lift Drum Stacker with 460mm to 585mm Diameter.

Model: VDS-584

A proven heavy duty drum truck providing excellent mobility and high visibility, an ideal alternative to heavier lift trucks or powered walkies. Fully adjustable rubber lined clamp jaws allowing safe automatic handling of steel drums without marking them. Can be fitted with forks for light pallet handling.

Fork Mount Mounted Drum Tines Designed for Stacking and Un-stacking of Horizontally Positioned 210 Steel Drums - 360kg to 1080kg

Fork Mounted Drum Tines with 1, 2 and 3 Drum Options.

Model: FMDT-567

This is designed specifically for simple stacking and unstacking of horizontally positioned 210 litre steel drums. Available for use with either 1, 2 or 3 Drums at a time.

"High Lift" Scoop Fork Truck Attachment. Rigid Design Tipping By Tilting The Carriage Mast Of The Truck. 200 litres to 1000 litres - Range from 1500kg to 3500kg

High Lift Scoop Attachment.

Model: HLSA-629

This fork mounted bucket is ideal for picking up overspill or dross in a processing area. Ideal scoop for high and long reach where exact measurement of contents is not important.

LiftingSafety Mesh Box Truck with One Side Half Drop Side, 500kg Capacity, Various Size Options Available

Box Truck - Mesh Half Hinged Gate

Model: MBT-1074

This is a robust Mesh Box Truck, the strong mild steel angle framework is in filled with 50mm square Mesh, with a half hinged gate.

These mesh box trucks have a capacity of 350kg, they come supplied with 200mm steel centre, rubber tyres, two fixed, two swivel.

Long Thread Metric Collared Eye Bolt to BS529

Top quality UK manufactured high tensile steel long shank collared eye bolts to BS529 M10 to M30. 250kg to 4 tonne lifting capacity.

Model: LCEB-42

Long thread collared eyebolts to BS529 are available with capacities from 250kg to 4000kg with thread sizes from M10 to M30, thread sizes are as follows.

Metric tread long collared eye bolts are available in the following sizes - 0.25t, 0.4t, 0.5t, 0.8t, 1t, 1.6t, 2.5t, 4t.

LiftingSafety Chair Carrying Sack Truck, 200kg Capacity, Shoe Plate 198 x 565mm

Chair Carrying Sack Truck with Large Toe Tray

Model: CCST-1017

Metric Thread Collared Eye Bolt Generally to DIN580

High quality, high tensile collared eye bolts generally to DIN 580 with course thread M8 to M64. 95kg to 16 tonne lifting capacity.

Model: CEB-43

DIN 580 metric thread collared eye bolts are available in capacities from 95kg up to 16000kg with thread sizes from M8 to M64

Metric thread DIN Collared eye bolts are available in sizes - 0.09t - 11.6t.

Fork Lift Truck Tine Mounted Hydraulic Ram Operated Telescopic "Extender" Jib Attachment - Range From 210kg to 1000kg

Hydraulic Telescopic Jib. Arm Length 2000 to 3000mm. Please note the beam cannot be operated under load.

Model: HTJ-606

This Deluxe Model of Fork Mounted Extender Jib is fitted with a hydraulic cylinder to enable the telescopic inner beam to be positioned with ease without the need for the forklift operator to leave his seat. The inner beam can also be positioned infinitely between 2000mm - 3000mm. Lifting points under the fix section of the beam run from 1000mm to 1750mm at 250mm increments. This Jib is provided with two hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load. This jib requires 1 double acting hydraulic service on the fork lift truck. Crane Jib also supplied without hoses.

Metric Thread Oval Link Eye Bolt

Top quality UK manufactured high tensile collared eye bolts with oval link to BS4278 table 2 1984 or from BS4278 forgings with course thread M8 to M48. 100kg to 6.3 tonne lifting capacity.

Model: EBWOL-45

Collared eye bolts with oval links to BS 4278 Table 2 are available from 1000kg to 6300kg with thread sizes: M20, M24, M30, M36 and M48.

Metric Thread Oval Link Eye Bolts are available in the following sizes - 1t, 1.6t, 2.5t, 4t, 6.3t.

Weldless Bow Nut to BS3974 with Metric Thread

Drop forged weldless lifting eye nuts (bow nuts). 250kg to 7400kg. M8 to M42.

Model: WEN-46

Weldless Eye Nuts to BS 3974 part 1 1974 are available in capacities from 230kg up to 7400kg

With metric thread sizes available from M8 to M42.

Lifting Eye Nut with Metric Thread

Drop forged standard eye nuts from BS970 high tensile normalised steel. 200kg to 2.2 tonne lifting capacity options. M8 to M24

Model: SEN-47

Eye Nuts to BS970 are available from 200kg to 2200kg with metric thread sizes available from M8 up to M24.

Fork truck Mounted Stainless Drum Positioner Attachment for One or Two Drums - 400kg or 800kg

Fork Mounted Stainless Steel Drum Positioner with 1 or 2 Drum Options.

Model: SDP-911

This is a unique means of manipulating drums from horizontal to vertical and vice-versa without leaving the seat of the fork truck. Completely mechanical in operation, it can be used for transporting drums and for unloading and loading vehicles, drum stands, drum racks etc. The ideal attachment for advanced drum positioning.

Fork Lift Truck Tine Mounted Stainless Drum Handler. Rim Grip Attachment - Range from 750kg to 2250kg

Stainless Steel Forklift Mounted Rim Grip Drum Handler with 1, 2 and 3 Drum Options.

Model: SDH-910

This is a drum handler designed for handling drums that are packed tightly together, its ideal for stuffing and de-stuffing containers and is suitable for use on rough terrain. May be used with 120 or 210 litre drums of steel or L ring plastic types. Made completely from Stainless Steel, which makes it suitable for use in the food and drink processing industry.

Large Wheelie Bin Handler Fork Lift Truck Attachment - 500kg or 1100 Litre

Wheelie bin fork truck attachment for lifting and tipping/emptying of 660 to 1100 litre wheelie bins.

Model: LWBH-908

This wheelie bin handler allows simple lift and empty operation of a large wheelie bin. The attachment slides onto the forks of the lift truck and is retained by heel pins. Lifting slots on the wheelie bin simply raise the attachment to the required height so that the side of the receptacle is positioned on the base of the bin.

Manual Articulating Overhead Crane Trolley (Push/Pull) - Range from 250kg to 2000kg

Crane Trolley to make a manually powered push / pull crane (Manual Crane Kit). Sold in pairs. Beams are not included.

Model: MAOCT-853

The ideal partner for this articulated rolling beam is a hand-powered chain hoist. The Articulated Beam Trolley Kit Includes: A pair of trolleys each fitted with four steel rollers (mounted on ball bearings), he adjustment of the roller raceway profile consists of a treated steel tie-bar, 4 anti-drop rollers (in compliance with legislation), a coupling consisting of a strap piece in die-stamped steel and 2 articulations, one of which is mounted on a ball and socket joint, 2 safety ChainsSafety chains, The purpose of this system is to restore the link between the trolleys and beam in the event of failure of the coupling linking the trolleys to the beam.

Lightweight 'C' Profile Mobile Lifting Gantry (light duty) with 500kg to 2000kg Capacities

Mobile Gantry with 2m to 5m Span and 2m to 3.5m Clearance, Not Moveable Underload.

Model: CPMG-845

Portable C-Profile Gantry - Not Moveable with load. Manual gantry cranes are mobile on wheels for indoor service. THESE GANTRY CRANES ARE NOT MOBILE EVEN UNDER LOAD. Options for 2 metre, 3 metre, 4 metre or 5 metre span. 2 metre, 2.5 metre, 3 metre and 3.5 metre under beam clearance. 500kg, 1000kg, 1600kg and 2000kg SWL capacities. The main features are: Run away made of C Profile (eurosystem), Push travel trolley for hook suspended hoist, Wheels in white polymid upto 2 tons and polyurethane from 3.2 tons, Painting: 2 layers paint system. Yellow RAL.1028, Maximum electric travelling speed: 10 m/min.

LiftingSafety Compact Folding Sack Truck, 100kg Capacity, Folding Shoe 410 x 320mm

Compact Sack Truck.

Model: CST-1022

LiftingSafety Heavy Duty Sack Truck, 255kg Capacity, Open Shoe, Various Size Options Available

Heavy Duty Sack Truck.

Model: HDST-1025

LiftingSafety Single Ended Mesh and Plywood Trolley, 500kg Capacity, Various Size Options Available

Platform Truck - Single Ended Mesh Trolley

Model: SEMT-1066

LiftingSafety Single Ended Plywood Trolley, 500kg Capacity, Various Size Options Available

Platform Truck - Single Ended Plywood Trolley

Model: SEPT-1065

LiftingSafety Single Ended Tubular Trolley, 500kg Capacity, Various Size Options Available

Platform Truck - Single and large Ended Tubular Trolley

Model: SETT-1064

LiftingSafety Nesting Trolley, 400kg Capacity, 1180 x 600mm Platform

Platform Truck - Nesting Trolley

Model: NT-1061

LiftingSafety Double Mesh Ended Trolley, 500kg Capacity, Various Size Options Available

Platform Truck Double Mesh Ends.

Model: DET-1048

LiftingSafety Double Plywood Ended Trolley, 50kg Capacity, Various Size Options Available

Platform Truck Double Plywood Ends.

Model: DET-1047

LiftingSafety Double Tubular Ended Trolley, 500kg Capacity, Various Size Options Available

Platform Truck Double Tubular Ends.

Model: DET-1046

LiftingSafety Three Way Truck, 200kg Capacity

Multi Purpose Sack Truck / Trolley.

Model: TWST-1042

Shoe Plate Sack Truck

200kg capacity sack truck with 200 x 365mm shoe plate.

Model: PSST-1037

LiftingSafety Medium Duty Sack Truck, 200kg Capacity, Open Shoe 240 x 365mm

Medium Duty Sack Truck.

Model: MDST-1035

LiftingSafety Medium Duty Sack Truck, 200kg Capacity, Open Shoes 240 x 365mm

Medium Duty Sack Truck.

Model: MDST-1032

LiftingSafety Basic Light Weight Sack Truck, 120kg Capacity, Open Shoe 160 x 370mm

Light Duty Sack Truck.

Model: LDST-1027

Portable Jib Crane, 'H' section lifting Beam - Range from 125kg to 500kg

Mobile Swing Jib Crane with Underbraced, suitable for low headroom application.

Model: PJC-837

The under braced design on this portable swing jib crane is a lower overall height than the over-braced cranes and this means that it is particularly suitable for lifting applications with restricted headroom. Available in 125kg, 250kg and 500kg with different lengths of span.

Adjustable 4 Point Lifting Beam, SWL and Dimension To Your Spec - Range from 2,000kg to 10,000kg

Standard range from 2,000kg to 10,000kg with 4 adjustable lower suspension points. SWL and Dimensions can be modified to your specification.

Model: 4PLB-769

Manual Work Positioner - 200kg Capacity, 1500mm Lift Height

Manual Lift Work Positioner.

Model: MWP-656

This manual work positioner is a manoeuvrable, lightweight unit, designed to take the strain out of any lifting job from ground level to over shoulder height. Ideal for use in narrow aisles and confined spaces. Perfect for all applications from pharmaceutical to catering, from packing line to food processing, from warehouse to office, kitchens, laboratories, retail outlets, etc. Maximum capacity 200kg.

Calibrated And Trading Standards Stamped "Multi-Scoop" Fork Bucket Attachment. 200 litre to 400 litre - Range from 1500kg to 3000kg

Fork-Lift Truck Multi-Scoop Attachment.

Model: CM-631

This unit has all the characteristics of the standard multi-scoop but with the additional benefit of being calibrated and stamped by The Trading Standards Department. Ideal for point of sale measurement and loading of loose material.

Star Wheel Sack Truck, 150kg Capacity

Star Wheel Sack Truck for easy manoeuvring of loads up stairs and kerbs

Model: SWST-1039

Electric Powered Lift Work Positioners - Capacities up to 150kg, & up to 1700mm Lift Height

Lightweight Easily Manoeuvrable Electric Powered Lifting Devices.

Model: EWP-657

This electric lift work positioner is an extremely manoeuvrable, lightweight unit, designed to take the strain out of any lifting job from ground level to over shoulder height. Operated with a manual hand winch, with an auto braking system to prevent uncontrolled lowering. Has an automatic electronic overload system to ensure safety, maintenance free with sealed batteries and an automatic charger. Maximum capacity is 100kg.

Hydraulic "Multi-Scoop" Fork Mounted Bucket Material Lifting Attachment. Taps into Lift Trucks Hydraulics 200 litres to 500 litres - Range from 2000kg to 3000kg

Multi-Scoop Fork-lift Truck Attachment.

Model: HM-632

This is the ideal piece of equipment for loading small vans or discharging loads into the centre of a lorry with the added advantage of being hydraulically operated. Can be calibrated at an extra cost.

Fork truck Carriage Mounted Hydraulic Scoop / Bucket Attachment. Connects in to Truck Hydraulic Circuit. 200 litre to 500 litre

Hydraulic forklift truck mounted scoop attachment.

Model: HSA-633

This is a hydraulically operated bucket with infinitely controllable discharge rate. This is a calibratable design with a low service requirement.

Mechanical Scissor Grabs For Crane or Fork Truck - Range from 100kg to 1500kg

Mechanical Scissor action stone/block grabs.

Model: MSG-638

High Lift Pallet Trucks. Manual Operation. Capacity up to 1500kg, 800mm Lift Height

High Lift Pallet Truck with option capacity, fork length and fork width.

Model: HLPT-640

Regular / Heavy Duty Roll Forward Skip Fork Truck Attachment. 250 to 2000 litre / 1000kg to 1500kg

Roll Forward Skips for use with forklift trucks or telehandlers.

Model: RFS-527

This has a unique twin lock system and simple to operate release mechanism. Roll forward skips keep working areas clear and allow safe and speedy removal of scrap, waste or rubbish to the appropriate skip or waste compacter. This is the ideal solution to waste handling. Available in a range of different models and colours.

Long Reach Easy Manual Tipping "Multi-Scoop" Fork Lift Truck Bucket Attachment. 200 litre to 500 litres- Range from 1500kg to 3000kg

Multi-scoop Attachment, The Ideal Choice for Use In Confined Spaces.

Model: MA-630

This attachment is the ideal tipping bucket for loading small vans and charging hoppers. Its long reach allows discharge of materials into the centre of a lorry, whilst small tipping arc allows discharge where headroom is confined.

Fork Truck Mounted Roll Forward Packaging Skip. 700 Litre to 2500 Litres - 1000kg to 1500kg

Packaging Skip, Ideal for handling rubbish of high volume, low weight material, such as paper, packaging materials etc.

Model: PS-531

Manufactured by adding 500mm mesh height extensions on three sides to give higher volume and added rigidity without a significant increase in the weight. Ideal for handling rubbish of high volume, low weight material, such as paper, packaging materials etc. These tipping containers are ideal for recycling areas where paper and card need to be kept separate.

LiftingSafety 2 Point Bespoke Lifting Beams. "Fixed Length". Capacities and Sizes To Customers Specification

2 Point Centre Suspension Fixed Type Lifting Beam

Model: 2PLB-766

Our lifting beams are made from steel and painted for indoor or outdoor use to our customer's specification. The lifting beams listed in this section are examples only. All Lifting beams are made to order and therefore the design and lifting capacity can be modified to suit your individual requirements.

Economy Toe Jack - 3000kg or 8000kg Capacity

Economy Hydraulic Toe Jack.

Model: ETJ-2782

Trolley Truck Mounted Manually Manoeuvred Floor Operated Hydraulic Drum Rotator. Lift Height 1350mm to the Base of the vertical Drum - 350kg

Hydraulic Drum Rotator.

Model: HDR-682

This is ideal for tilt and rotation of 210 litre Steel, Plastic or Fibre Drums. The drum is gripped from the ring on top, cradled and held secure by steel support bars with a toggle clamp from centre of the drum.

LiftingSafety Two Position Aluminium Sack Truck - 300kg - 185 x 456mm Shoe - 1300mm Height

Aluminium Hand (Sack) Truck.

Model: AHT-670

LiftingSafety Mobile Scissor Lift Table - 150kg to 500kg Lifting Capacities, 760mm to 1030mm Lifting Height (5 options)

Mobile Scissor Lift Tables.

Model: MSLT-662

This mobile scissor lift table is designed for safety and ergonomics. Has lubrication points on all the links, with best quality poly wheels. A foldaway foot pump pedal and safety lowering valve. Available in different capacities of 150kg, 300kg, 350kg and 500kg each of which has a different lift height.

Economy Mobile Scissor Lift Tables - 150kg to 500kg Lifting Capacities, 755mm to 1575mm Lifting Height (5 Options)

Mobile Scissor Lift Tables.

Model: MSLT-661

Part Number

LiftingSafety "Safety Pulley" Gin Wheel Pulley with Automatic Brake - 30m or 60m rope available.

Safety Pulley / Gin Wheel fitted with Automatic Brake at 50kg capacity.

Model: SP-2676

200kg Hoisting Wheelbarrow with Lifting Point

Scaffold hoist wheelbarrow with polypropylene body and hard wearing pneumatic tyre.

Model: Scaffold Hoist Barrow / HWLH-4195

200kg Brick Basket

Scaffold hoist brick basket / materials lifting cage with central lifting point for use with scaffold hoists.

Model: BB-493

Bucket Carrier for Lifting Buckets with Hoists

2 or 4 bucket lifting frame for use with scaffold hoists. 70kg or 150kg capacity.

Model: BC-494

The Bucket Carrier is designed for use with a Scaffold Hoist.

Options for the lifting of 2 or 4 buckets are available.

Scaffold Hoist Hooks, 60kg Capacity

Triple hook lifting frame for use with scaffold hoists

Model: LH-497

Planetary 3Ph 400v Electric Lifting Winch - 360kg or 600kg

AC Electric Pulling & Lifting Winches 415v x 3ph Power Supply.

Model: PALW-1176

Features Include: Electromagnetic spring-applied fail safe brake, planetary gears for efficiency, cast steel foot mountings, fabricated steel drum, supplied on steel skid frame ready to mount, heavy duty high efficiency ball bearings on all running surfaces, enclosed drum flange to prevent rope becoming trapped between drum and support castings, low voltage control with emergency stop.

Single Phase (110v or 240v 50Hz) Electric Powered Compact Winches - 200kg or 300kg Options

Lightweight, fast and portable single phase winches. Supplied fitted with wire rope.

Model: CWL Series / SPEP-5476

Heavy Duty Electric Pulling Winch, with Freespool 110v, 240v or 415v, 2000kg Line Pull

Heavy Duty Electric Winch to EN14492-1, Typically used for Plant Moving, Slipways, Machine Movement

Model: HDPW-5104

Hydraulic Two Stage Planetary Recovery Wire Rope Winch, for Pulling Applications - 3560kg

Hydraulic Recovery Winch. Not certified for lifting or man-riding applications. 3560kgf (kilogram-force) line pull.

Model: HTSP-4867

LiftingSafety 110v or 240v DC Wire Rope Lifting Hoist - Range from 120kg, 300kg or 500kg Options. (Lifting capacities)

Wire rope hoist Certified for lifting applications up to 12 metre cable lengths.

Model: DHDLW-2635

Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase. Wire ropes are not included in warranty.

Features:     12 volt reversible permanent magnet motor;    Low amp. draw and low sound level;    25% ED duty cycle and maximum starting frequency of 150 times/h at 63% load;     Suitable for a wide range of lifting applications;     Ratchet brake;     Hand held remote with a 4.4m cord.
  

Heavy Duty 3Ph Electric Wire Rope Hoist - Range from 900kg - 5000kg

AC Electric Pulling winch or Lifting Hoists 415V x 3ph Power Supply.

Model: PALW-1177

Features: Electromagnetic spring-applied fail safe brake, extra Heavy Duty Machine, planetary gears for efficiency, cast steel foot mountings, fabricated steel drum, supplied on steel skid frame ready to mount, motor to IP54 as standard, heavy duty high efficiency ball bearings on all running surfaces, enclosed drum flange, low voltage control with emergency stop.

Options: Low voltage control pendant with emergency stop and radio remote control.

110v or 240v Scaffold Hoist

Wire rope builders hoist designed for lifting applications on construction sites. Capacity options of 80, 160, 230 or 300 kg, with lifting heights up to 30 metres.

Model: SHUT2-273

LiftingSafety 1ph 240v Electric Planetary Lifting Winch - 300kg or 500kg

AC Electric Pulling & Lifting Winches with 240V x 1ph Power Supply.

Model: PALW-1175

Features: Electromagnetic spring-applied fail safe brake, planetary gears for efficiency, fabricated steel drum, supplied on steel skid frame ready to mount, heavy duty high efficiency ball bearings on all running surfaces, enclosed drum flange, low voltage control with emergency stop.

Options: Low voltage control pendant w/ emergency stop and radio remote control.

LiftingSafety Bi-Rotational Electric Winch - 300kg

110v, 240v or 415v AC Electric Bi-Rotational Pulling Winch / Lifting Hoists.

Model: PALW-1173

Features Positive retention of wire rope on to drum, all CWG winches are bi-rotational, electromagnetic spring-applied fail safe brake, heavy duty wanderlead with emergency stop, heavy duty high efficiency ball bearings on all running surfaces, planetary gearing for maximum mechanical efficiency, enclosed drum flanges and has quiet running.

LiftingSafety Wire Rope Hoist, 1Ph 110v/240v or 415v 3ph Certified for Lifting - Range from 250kg to 500kg

AC Electric Pulling Winches with hoisting. 110v, 240v or 415v power supply options.

Model: PALW-1171

AC Electric Pulling Winch with Freespool, 415v, 3000kg or 4000kg Line Pull

Electric Winch to EN14492-1, Typically used for Plant Moving, Slipways, Machine Movement

Model: PALW-1170

Features include: Freespool clutch, enables rapid unspooling of wire rope, mounting plate, wire rope, roller fairleads, electromagnetic brake, low voltage(24v) pendant control, emergency stop and motor to IP54 as standard.

Options: Wire rope tension rollee, skid mounting frame, electronic speed control, weather proof enclosure and radio remote control.

Freespooling 110v, 240v or 415v Electric Winch, 1000kg

AC Pulling Winches with Freespool.

Model: PALW-1167

LiftingSafety Electric Capstan Pulling Winch. Twin Drums at 1500kg and 2500kg Line Pull, 110v or 240v options

Lightweight and Portable Capstan Cable Pulling Winch for Continuous Pulling.

Model: CPW-932

LiftingSafety "High Capacity" Cable Puller Wire Rope Hoist for Lifting and Pulling Applications - Range from 800kg to 5400kg (Lifting capacity)

Tirfor Alternative with optional rope and lengths with unique 5.4 tonne lifting capacity.

Model: VCP-914

LiftingSafety Digital Load Cell with on-board LCD Display (optional remote control) - Range from 5000kg to 300,000kg

Industrial 5 to 300 Tonne Digital Load Indicator (load cells) With Remote Options.

Model: DLC-401

Load cells suitable for the harsh offshore market place where accuracy, reliability and environmental sealing are at a premium. These load cells not only carries on this tradition but also adds resolution of 1 in 100,000, switchable units of measurement. Logging output and peak hold as standard. High safety factor. Permanent backlit display gives good visibility even in low light conditions and Logging output ideal for data collection via option logging package. Long battery life, via easily accessible batteries. IP66 'O' ring sealing suitable for offshore use.

LiftingSafety Load Shackle - Range from 500kg to 1,000,000kg

Cabled or telemetry load shackle.

Model: CLS-402

LiftingSafety Wireless Load Cell (No Onboard Display) - Range from 5000kg to 500,000kg

Wireless Load Indicator (load cell) with 200m Range, Waterproof to IP66 Standard.

Model: WLC-404

LiftingSafety Compressive Load Cell - Range from 25,000kg to 1,500,000kg (1500 tonne)

Stainless Steel Compression Load Cells (load indicator).

Model: CLC-405

Compression Cell - CAPACITIES 100 te to 1000 te.

Stainless Steel load cell.

Optional Swivel Top.

Optional Loading Base

LiftingSafety Explosion Proof Load Cell - Range from 200kg to 500,000kg

Atex Zone 2 Rated (Explosion Proof) Digital Load Indicator (Load cells).

Model: EPLC-2651

LiftingSafety Tensile Cabled Load Cell - Range from 5000kg to 300,000kg

Cabled load cell with remote display.

Model: TCLC-2709

LiftingSafety 2 Point Adjustable Lifting Beams, Standard Capacity from 1 tonne to 10 tonne

2 Point Centre Suspension Adjustable Lifting Beam. Custom made / bespoke options are available to customers specifications

Model: 2PLB-767

LiftingSafety Pilewind Winch - Range from 125kg to 400kg

Compact and light-weight pilewind winch.

Model: PW-3240

Designed and manufactured in the UK, based on a contemporary design, this winch has been manufactured to lose a lot of the excess weight from the conventional winch design without losing strength or quality. It is an ideal solution for schools, smaller venues and retail outlets to use for banners, small trusses and lighting bars. Perfect for installations where access to a three phase power supply is problematic.

High Capacity Manual Chain Hoist

High quality manual hand chain block and tackle available upto 50 tonne as standard and 100 tonne on request.

Model: MCHT-3654

High-quality lightweight manual hand chain hoist available in capacities of 30,000kg, 40,000kg and 50,000kg as standard with up to 100,000kg being available upon request.

With lighter weight, higher efficiency and more compact size, these hoists are valuable in a wide variety of lifting applications.

Special Lifting Beams and Spreader Beams

Lifting and Spreader Beams, Special and bespoke designs to Customers Specification.

Model: SBS-395

Lifting and spreader beams are individually designed to customer's requirements and for a wide variety of applications including customer specified safe working load and dimensions, painted or galvanised. For marine and offshore use with adjustable centre of gravity and with anti-sparking (spark resistant) features.

Economy Two-Part Ratchet Straps - Boxed Quantities

Bulk box or pallet quantity green imported ratchet strap lashing systems. 2.5t lashing capacity, 5t MBS. 4-12m length options.

Model: CERS-5557

Super Techlon Round / endless Lifting Slings With Durable Outer Cover - Range from 1000kg to 150,000kg

Super Techlon Webbing Round Slings.

Model: STLS-1143

Super Techlon Webbing Round Slings have a heavy duty woven sleeve made of high tenacity polyester fibre.  They also have a herringbone weave which results in a very high wear resistance and a high degree of self-recovering properties.

Other features: High cut resistance, high stability, high abrasion resistance, colour coded.

Polyester Round Slings (Endless Lifting Slings) - 1 tonne to 100 tonnes

Top quality UK manufactured polyester round lifting slings (endless fibre slings) conforming to BS EN 1492-2 for industrial use.

Model: RS-2599

Polyester Flat Web Lifting Slings (Belt Slings) - 1 tonne to 30 tonnes

Top quality UK manufactured duplex polyester flat webbing slings with reinforced eyes (fibre flat web sling) conforming to BS EN 1492-1 for industrial use.

Model: FWLS-2600

Round Fibre Lifting Slings for the Entertainment Industry, Capacity 2.0t

Black Lifting Strops for use in TV studios, Music & Sports Arenas, Places of Worship, Production Rigging, Multi-purpose Venues & Theatres

Model: RLSF-4998

Steel Wire Rope Round Slings with Soft Protective Cover for the Entertainment Industry, Lifting Capacity 2.0t

Black lifting slings/strops for use in TV studios, music & sports arenas, places of worship, production rigging, multi-purpose venues & theatres.

Model: SSRL-4999

LS Black Full Body Fall Arrest Harness with Rear 'D' Ring, and 2 Side D's

Black Safety Harness to EN358:2002, EN361:2002 & EN813:2008 for use in Tv studios, Music & Sports Arenas, Places of Worship, Production Rigging, Multi-purpose Venues & Theatres

Model: LFAH-5027

LS Black Fall Arrest Harness with with Front & Rear 'D' Rings

Black Safety Harness to EN361:2002 for use in Tv studios, Music & Sports Arenas, Places of Worship, Production Rigging, Multi-purpose Venues & Theatres

Model: LBFB-5028

Endless Ratchet Lashing, Min. Breaking Strength Range from 1 tonne to 20 tonne

Quality Ratchet Straps, Webbing Width Options from 25mm to 75mm wide with Optional Lengths. 1000kg to 20,000kg Minimum Breaking Strength (when New) Capacity.

Model: PRLW-5516

Protective Sleeves for Polyester Flat Web Lifting Slings

Wear Sleeves for Webbing Lifting Strops

Model: PSFP-5539

Protective Sleeves for Polyester Round Lifting Slings

Wear Sleeves for Lifting Strops

Model: PSFP-5540

Two Part Ratchet Lashing with Claw Hook

Quality ratchet straps with webbing width options from 25mm to 75mm wide with optional lengths and capacities, 500kg to 10-tonne MBS (minimum breaking strength - when new).

Model: CHRS-220

High quality webbing combined with robust easy to use ratchet and strong claw hooks. 0.5m short section attached to ratchet and 7.5 metre long part.

Our most popular size webbing load restraint - complies to BS EN 12195 - 2 with sewn-in durable ID and instruction label

Adjustable 2-Point Rack and Pinion Lifting Beam - 1000kg to 5000kg

Steel two-point lifting beam with single upper suspension eye and 2 adjustable lower hooks.

Model: RAPL-5520

Riveted Chain Wire Mesh Sling

Reevable or Non-reevable (choke) versions, 1.5t to 15t WLL. Standard lengths from 1 to 4 metres.

Model: 421/422/427/428 / RCWM-5524

Hydraulic Swaging Press Machines - 600t, 1000t and 1500t

Hydraulic Swaging Machines.

Model: HSP-2703

Wire Rope Thimbles, 6mm to 52mm

Galvanised Thimble eyes to BS EN 13411-1

Model: WRT-4865

Wire Rope Grips, 5mm to 40mm

Heavy Duty BullDog Grips to BS EN 13411-5 Type ‘A’

Model: WRG-4866

Stainless Steel, Grade 60 316L, Pump Lifting Chain with Lifting Rings at 1m Intervals, WLL 400kg to 6300kg

Stainless steel pump lifting chains with a master link (lifting point) every 1000mm.

Model: SSGP-4937

Stainless Steel, Grade 50 316L, Pump Lifting Chain with Lifting Rings at 1m Intervals, WLL 320kg to 5000kg

Stainless steel pump lifting chains with a master link (lifting point) every 1000mm.

Model: SSGP-4936

LiftingSafety Alloy Gantry Crane / Tripod combo, Certified for Man-riding (Fall Arrest) & Materials Lifting. 500kg

Adjustable combination gantry crane and man-riding tripod built into a single transportable unit for ease of use on different site locations.

Model: TGC-3102

The light-weight aluminium Flygt Easylift has been specially designed so that it can be safely assembled by a single person and is stable even during erection, with no heavy part or hard to place bolts. This gantry tripod also conforms to the work at height regulations, certified for man-riding, rescue and fall arrest applications. Loads can be moved without moving the equipment from its centre of gravity.

Steel Hook For Polyester / Synthetic Round or Belt Webbing Sling, Easily Applied and Removed - Range from 1000kg to 10000kg

Specially designed lifting hook for use with textile lifting slings.

Model: JHSH-3094

Adds maximum versatility a round slings and flat webbing slings. Simply thread the roundsling or the eye of a flat webbing sling into the J hook, without the need for any tools and then attach the hook to the lifting point of the materials to be lifted. Then place the flat sling or round sling over the crane hook and its ready to lift. All J Hooks are colour coded by capacity to match the colour of a lifting sling e.g. Purple sling = purple J hook. The J hook can also bring two slings together problem free. A fool-proof solution for safe and efficient operation!

LiftingSafety Telescopic Extension Pole for Remote / Distance Connection, Options with up to 5.4m Reach!

Extendable Pole for Enabling a Connection to Those Un-reachable Connection Points, Available in 3 Different Sizes

Model: LTEP-5088

Ultra Quick Set-up Aluminium A-Frame Lifting Gantry

Unique and easily transportable multi-purpose lightweight alloy gantry crane systems. Assembly requires just 2 pins, with optional beam length of up to 4m. 500kg to 1 tonne.

Model: UQPG-3587

Portable Aluminium Gantry with Castors

Fully adjustable, quick assembly, ATEX (Zone 2) certified mobile gantry system that is also certified for man-riding with optional working heights and beam lengths. 500kg to 5 tonne.

Model: PG-4319

Baxx Permanent Lifting Magnet - Range from 125kg to 2000kg

Slim Light Design Permanent Lifting / Handling Magnets.

Model: BPLM-4761

LiftingSafety Load Arrestor - Range from 300kg to 3000kg (20 Options)

High quality UK manufactured load arresters with many cable length options.

Model: SELS Load Arrestors / LA-2653

The Load arrestor provides independent protection that will arrest the fall of a load in the event of the primary system failing and, as it is completely independent of the primary lifting system, it lowers the risk of equipment damage and protects workers in and around the area of the incident. This range of load arrestors comes with safe working loads between 300kg and 3000kg, with a variety of wire cable lengths and arrest speeds. The load arrestor is installed adjacent to the primary lifting device and fixed to a suitable anchorage point. Its retractable steel cable is then secured to the load. The wire rope is attached to the arrestor using an internal spring loaded drum that keeps the rope under a constant light tension yet allows unrestricted movement of the protected load.

LiftingSafety Temporary or Permanent Mount Load Arrestors, Range from 300kg to 1600kg

Load Arrestors designed for arduous duty cycles and when the stopping distance is critical.

Model: LTOP-5126

LiftingSafety Low Head Room Temporary or Permanent Articulating Lifting Link - Max. Capacity 3,000kg

Adjustable lifting point designed to support up to 3 tonne loads with a +/- 18 degree lift angle from the supporting steelwork.

Model: LTOP-5078

LiftingSafety Temporary or Permanent Swivel & Articulating Load Ring Lifting Point - Max Capacity 10,000kg

Lifting Point with 6 Bolts. Bespoke unit for multiple applications with vertical load, loads at an angle and rotation of up to 360°.

Model: ELP-3184

Corrosion resistant models available.

Each kit includes 6 fixing bolts, fixing plates and lifting eyebolt as standard

LiftingSafety Low Head Room Temporary or Permanent Swivel Eye Bolt Lifting Point - Max Capacity 7,000kg

Lifting Point with 4 Bolts. Bespoke unit for multiple applications with vertical load, loads at an angle and rotation of up to 360°.

Model: ELP-3183

Corrosion resistant models are available.

Kit includes 4 fixing bolts, fixing plates and lifting eyebolt as standard.

Bespoke units are available for multiple load applications, including load capacity, lift angle and rotation of up to 360 degress.

LiftingSafety Temporary or Permanent Shackle Lifting Point - Max Capacity 6100kg

Four bolt temporary or permanent shackle clamp lifting point for vertical lift with corrosion protection option.

Model: SLP-3182

Corrosion Resistant models are available. This kit includes 4 fixing bolts, fixing plates and shackle as standard.

Portable Light Weight, Vertical Pole Style Davit Arm With Many Options Built To Customers Specification - Range to 1000kg

Portable Lightweight Split Pole Davit Arm, Specials and Bespoke designs are available. Top quality made in the UK.

Model: SPDA-1210

We offer several designs of lightweight portable davit lifting arms, including lean over type davits and vertical split pole type davits. The split pole davits are suited to applications where there is an obstruction which must be worked around, because the unit is relatively compact it offers an excellent solution for a confined space or restricted access lifting environments.

Smartlink EE Super-Lightweight Load Indicator - 2t to 20t Options

Exceptionally tiny and extremely low weight titanium wireless load cells. Waterproof beyond IP68.

Model: Smartlink® EE / TLWL-5505

Lightweight Hydraulic Jacks - Range from 6500kg to 15,000kg

Top quality UK made Lightweight Aluminium Hydraulic Cub Jacks, small and portable.

Model: Cub / LHJ-3037

LiftingSafety "Load Release" Remote Hook-Clamp - Range 590kg to 70 tonne (Higher capacities available on request)

Manual, Hydraulic, Pneumatic operation, Stainless Steel Corrosion resistant SubSea Auto Remote Release Offshore Clamp. Shackles are not included as standard.

Model: LARH-4193

Mobile / Crawler Crane / Bridge / Harbour Crane Hook Blocks - Custom Made and Overhaul

Hook Blocks and Baby Weights to Suit all Types of Cranes and Custom Pulley Blocks

Model: MCCH-5108

Counter Balance Mini Floor Cranes with Telescopic Boom

Versatile fully dismantlable workshop and site floor cranes. Capacity 500kg (MFC/Ks) & 900kg (MFC/K)

Model: MFC-5079

Toughlift ML Series Materials Lifter - 4 Capacity/Height Options

Heavy-duty manual materials lifters with working heights up to 7.9 metres.

Model: ML Series / TMML-5508

LiftingSafety Wireless Tension Load Cell - Range from 5,000kg to 300,000kg

Highly accurate wireless load cell for weighing and load monitoring. Standard unit display in tonnes with other units on request

Model: WTLC-3718

LiftingSafety Cabled Tension Load Cell - Range from 5,000kg to 50,000kg

Cabled weighing load cell made from lightweight aluminium alloys.

Model: CTLC-3719

This has a cable length of 10m, and displays the weighs in tonnes as standard, but optionally, lbs, kN and kg.

Available load ranges are : 5000kg, 12,000kg, 25,000kg and 50,000kg

Compact Tension Load Cell

Digital load indicator with cabled or wireless display. 1000kg to 4750kg.

Model: LTLC-4733

Alba Griphoist Type Cable Puller for Lifting and Pulling - 800kg to 3200kg Capacity

Manual tirfor type cable pulling device for lifting or pulling applications.

Model: G-4498

Round Polyester Lifting Slings (endless lifting slings). Conforms to BS EN 1492-2 - 1000kg to 8000kg.

Quality EU Manufactured, ELRO Round Lifting Slings (Fibre Endless Slings). Factor of Safety 7:1

Model: PRLS-4776

UHMWPE Round / Endless Lifting Slings With Exceptional Strength and Wear Resistance - 15 tonne to 300 tonne as standard (higher on request)

Fibre round / endless lifting slings. Available in various configurations (Core either UHMWPE or Polyester - Sleeve either UHMWPE of Polyester - Or Both UHMWPE)

Model: GRLS-4642

"Cobra" Compact Round Lifting Slings (endless lifting slings). Conforms to BS EN 1492-2 - Range from 1000kg to 5,000kg.

Round Lifting Slings (Fibre Endless Slings) with circular/tubed body (thinner and more rigid when compared to standard round slings).

Model: RS-4641

Colour Coding Rubber Tags for Asset Identification / Periodic Inspection of Lifting Equipment - Sold In Packs of 50

Coloured tags for the tagging and identification of site or workshop equipment. Robust and flexible, and can be printed with your artwork

Model: RTFL-4734

Colour Coding Tags for Lifting Equipment and Material Identification / Inspection - Sold In Packs Of 50

Robust coloured rubber ID tags specifically for the tagging and identification of site or workshop equipment. Available in 13 different colours. Printed single side or both sides is available on request.

Model: CCT-3265

Portable Mini Cranes, 360 Degree Rotation, 5 metre Reach and Upto 6m Hook Height, 400kg Capacity

Mobile counter-weight jib crane with rotating jib arm, 110v or 400v.

Model: TMC-3141

Wire Rope Lifting Slings

Build a wire rope lifting sling to your specification with a wide choice of styles and fittings.

Model: WRS-3373

Anchor Pin Ring Clutch Type 2, WLL Range from 4000kg to 10,000kg

Pin Anchor Ring Clutch lifting device manufactured from several cast components, Capacity Range from 4 tonne to 10 tonne.

Model: APRC-5390

Combination Anchor Pin Ring Clutch, WLL Range from 1000kg to 20,000kg

Pin Anchor Ring Clutch lifting device manufactured from several cast components, Capacity Range from 1 tonne to 20 tonne.

Model: CAPR-5389

Anchor Pin Ring Clutch, WLL Range from 1000kg to 45,000kg

Pin Anchor Ring Clutch lifting device manufactured from several cast components, Capacity Range from 1 tonne to 45 tonne.

Model: APRC-5388

SOLMHA Palletsafe™ Crane Fork Basket to suit 2000kg TKG-VHS & TKG-VH Self Balance & Manual Balance Crane Forks

Safety Cage only. Crane Forks NOT Included - Specifically Designed to Suit the TKG2.0VHS & TKG2.0VH Crane Forks.

Model: CFBT-5085

LiftingSafety Spring Loaded Temporary Eyebolt Anchor Points. EN795 Compliant

Quick and Easy to Install Anchorage Points - Options Available for Through Girder Flange, Concrete or Pre-Cast Sections.

Model: GGE-2229

Single Person Cylinder Shaped Man Basket Supplied with Chain Sling

Crane slung 1 person, small profile man-riding access cradle.

Model: CMB-5118

HE 200 Veloce Scaffold hoist, 110v, 40m Working Height, 200kg Capacity

Single phase electric scaffolders wire rope hoist. High speed lift at 39m/min.

Model: SH-4514

HE 200 Scaffold Hoist, 110v, 25m Working Height, 200kg Capacity

Single phase electric scaffolders wire rope hoist. 23m/min lift speed.

Model: SH-4513

HE 150 Veloce Scaffold Hoist, 110v, 40m Working Height, 150kg Capacity

Single phase electric scaffolders wire rope hoist. High lift speed at 33m/min. Adjustable reach arm.

Model: SH-4512

Manual or Semi-Powered Counter-Balance Floor Crane

Manual or semi-powered (electric lift, manual push-pull travel) pivoting arm (up/down - not rotating) counterbalance floor cranes. Hook height 2375mm-2400mm. 150kg - 350kg capacity options

Model: MOSC-5433

Fully Powered Counter-Balanced Floor Crane with Manually Adjustable 3 position Jib and Hook

Battery operated hydraulic pivoting arm (up/down - not rotating) counterbalance crane with powered lift and travel. 500kg, 750kg or 1000kg capacity.

Model: FPCF-5434

Manual Counterbalanced Workshop Floor Crane with Forks and Mast

Manual moving and manual operated hydraulic lift with adjustable forks

Model: MCWF-5466

Manual Counterbalanced Workshop Floor Crane with Electric Raise & Lowering Forks and Mast

Manual moving and electric battery powered hydraulic lift with adjustable forks

Model: MCWF-5467

Spread Anchor Ring Clutch, WLL Range from 700kg to 26,000kg

Spread Anchor Ring Clutch all cast lifting device, Capacity Range from 0.70 tonne to 20 tonne.

Model: SARC-5391

Heavy Duty Scissor Lift Trolleys, Manual or Electric Operation, Range 500kg to 1250kg

Quality Manual or Electric Operation Scissor Lifts, Lift heights from 1050mm to 2900mm

Model: HDSL-5001

LiftingSafety Suspended Crane Scales - Range from 15,000kg to 25,000kg

Industrial suspended crane scales for use in areas classified as hazardous.

Model: SCS-3675

Industrial crane scales for use in areas classified as hazardous (Zone 1 and 21, 2 and 22) in accordance with Ex II 2GD IIC T4 T197°C X protection. Little space is taken up allowing the best use of the lifting devices. Predisposed for an upper connection ring and lower hook. Fitted with test certificate obtained with sample weights, up to 15000 kg of capacity.
Main features: Indicator with 17-key numeric-functional waterproof keyboard; Adjustable digital filter, anti-vibration and oscillation.   Programmable auto switch-off power for energy saving. Hermetically sealed extractable rechargeable battery, with 160-hour operating time; rechargeable in safe area.

LiftingSafety Ninja Series Suspended Crane Scales - Range from 1500kg to 9500kg

MCWN professional digital crane scales for weighing in industrial environments

Model: MCS-3674

Professional digital crane scales for weighing in industrial enviroments fitted with protective transport case. thanks to there compact size, the MCWN crane scales just slightly reduce the lifting distance of the crane.

LiftingSafety 2 Point "Adjustable" Lifting Beams. Central Fixed Top Ring & Adjustable Suspension Eyes to Underside - Range from 1000kg to 6000kg

Adjustable Lifting Beam with single central top lifting eye.

Model: TTP-3329

Adjustable lifting beam.

• Single beam spreader.
• WLL from 1000 kg to 6000 kg.
• Useful lengths of 1000 mm to 5000 mm.

Lifting Beam kits, fixed and Adjustable Load Centres up to 5000kg Capacity.

In order to minimise freight cost, you may order kits of components and have the beam manufactured locally.

Model: TT-3334

LiftingSafety "AutoHook" Automatic Gravity Load/Release Hook, Range 2,000kg to 10,000kg

Gravitational Release Mechanism, No access to Hook Required

Model: LAGR-4403

The LiftingSafety "AutoHook" Gravitational Release Hook is used when access to the load is difficult or dangerous for the operator, The AutoHook can be guided by its handle for positioning, once complete the operator can leave the area and perform the lifting/loading duty remotely.

LiftingSafety Letcart Load Arrestor - Range from 250kg to 1000kg (16 Options)

Load Arrestors from 8m to 25m.

Model: Letcart LA / LA-2803

Letcart 250 - 10m or 15m wire rope length. 20 metres a min max speed
Letcart S - 500kg, 800kg, 1000kg SWL. 15m, 20m, 25m wire rope length. 18 metres a min arrest speed
Letcart SI - 500kg, 800kg, 1000kg SWL. 15m, 25m wire rope length. 18 metres a min arrest speed.

Calibrated Test Weights

Calibrated Test Weights, 20kg Hand Weights or 250kg, 500kg, 1000kg and 5000kg Slab Weights

Model: TW-3283

Lightweight (25kg) Steel Lifting Davit. 125kg to 500kg

Portable lightweight and quick assembly lifting davit arm with 360 degree rotation and built-in hand winch.

Model: SLWA-4736

Automatic Hook and Release System, WLL: 5000kg

Electronically Operated Hook with Wireless Control, and Optional Accessories.

Model: AHLA-5099

LS "Black" Adjustable Restraint Belt

The Adjustable Restraint Belt, Work Positioning Belt with Adjustable Lanyard EN358.

Model: ARB-2611

The Adjustable Restraint Belt enhances the worker's safety by providing a safe means of restraint whilst working at heights. The user friendly design with integrated adjustable lanyard with only a single front connection point on the work belt, increasing stability. Using the Adjustable Restraint Belt overcomes the age old "three points of contact" problem that is encountered when working at heights.

SLK Superlift Advantage Counterbalanced Materials Lifter with Counter Weights.

Manual materials lift with removable counterweights. Max height of 7.9 metres and max capacity 450kg (model dependent)

Model: SLK / GWCW-942

Lifting Chain Sling, Grade 12

Grade 12 (120) chain slings assembly, 8mm to 16mm and WLL up to 25.6 tonnes. Lighter WLL to weight ratio than grade 8 and grade 10.

Model: CS12-4784