These lightweight, fast and efficient single phase winches are the ideal general purpose machines - and cannot be beaten for portable applications.
Features
- Available in 110v and 240v x 1ph
CWL200 & CWL200L = 110v & 240v
- Operates on standard household power supply - In case of 110v version via transformer
- Dynamic and mechanical brake provides instant and safe braking
- Lightweight and compact design for easy installation
- Foot mounted. Can be installed upside down
- Enclosed drum flange. Prevents ropes becoming trapped between drum and support castings
- Complete with wire rope. Galvanised for longer life
- 360º weighted safety hook. Swivel type with safety catch
- 10 metre pendant control. Plug-in, with 2 buttons and emergency stop
- 3 metre power lead. Pre-wired to the winch with commercial type plug
- Motor rating IP44. Brush type motor - no options
- Conformity: EN14492-2 for power driven hoists
Optional Extras
- Pendant control, plug in extension - Additional 10 metres
- Remote control
Dimensional Information
| Model |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
Fixing Holes |
| CWL200/301 |
135 |
210 |
270 |
152 |
415 |
4 off Ø10.5mm |
| CWL200L/301L |
135 |
210 |
270 |
207 |
470 |
4 off Ø10.5mm |
Specifications
| Model |
CWL200 |
CWL200L |
CWL301 |
CWL301L |
| Voltage |
110v 1ph 50Hz |
240v 1ph 50Hz |
110v 1ph 50Hz |
240v 1ph 50Hz |
240v 1ph 50Hz |
240v 1ph 50Hz |
| Lifting Capacity |
200kg |
200kg |
200kg |
200kg |
300kg |
300kg |
| Height of Lift |
45m |
45m |
69m |
69m |
29m |
53m |
| Weight of Winch Only |
30kg |
30kg |
33kg |
33kg |
38kg |
40kg |
| Weight of Total Kit (avg.) |
32kg |
32kg |
35kg |
35kg |
40kg |
42kg |
| Line Speed 1st Layer |
11m/min |
11m/min |
11m/min |
11m/min |
16m/min |
16m/min |
| Line Speed Last Layer |
16m/min |
16m/min |
16m/min |
16m/min |
25m/min |
25m/min |
| Duty Cycle |
Duty cycle: All 1ph have a duty cycle of 25%, with a maximum of 60 starts per hour |
| Wire Rope, Ø x Length |
5mm x 46m |
5mm x 46m |
5mm x 71m |
5mm x 71m |
6mm x 30m |
6mm x 55m |
| Wire Rope Construction |
6 x 19 wire core, galvanised for longer life. Factor of safety 5:1 |
| Motor type: |
Induction motor |
Induction motor |
Induction motor |
Induction motor |
Induction motor |
Induction motor |
| Output (Kilowatts) |
1.2kw |
1.2kw |
1.2kw |
1.2kw |
2.3kw |
2.3kw |
| Output (Amperes) |
12amp |
6amp |
12amp |
6amp |
11amp |
11amp |
| Braking: |
Motors: Electronic via resistor Gears: Mechanical ratchet brake |
| Drum Length |
97mm |
97mm |
147mm |
147mm |
97mm |
147mm |
| Drum Dia. |
95mm |
95mm |
95mm |
95mm |
95mm |
95mm |
| Drum Flange Ø |
190mm |
190mm |
190mm |
190mm |
190mm |
190mm |
| Rope ø to mean drum ø ratio* |
20:1 |
20:1 |
20:1 |
20:1 |
17:1 |
17:1 |
* Mean drum diameter = the drum diameter plus the diameter of the wire rope
Notes
- These winches must not be used for the movement of personnel.
- 7 wraps of wire rope must be maintained on the drum.
- Data shown is approximate and intended as a guide only.
Additional Information
For hoisting applications the minimum breaking force (MBF**) of the wire rope must be 5 x the lifting capacity of the hoist. The ratio of wire rope diameter to mean drum diameter* is usually at least 15:1. This will vary according to the application, the average operating time per day and the average and maximum weights being lifted.
For pulling applications. As a general rule winches used in pulling applications rarely see their maximum rated capacity and are used intermittently for short running periods. In these applications the wire rope MBF** to winch rating can be a minimum 2:1 and the ratio of wire rope to mean drum ratio* as low as 10.1.
In applications where the winch is used for longer running times and more frequently sees higher loading conditions the wire rope to MBF** should be 3:1 and the ratio of wire rope to mean drum ratio* 12:1.
For recovery vehicles the permissible standard of wire rope MBF** to winch rating can be a minimum 2:1 and the ratio of wire rope to mean drum ratio* only 10:1. This minimum standard is permitted because the running time is so short and the winch rarely sees maximum load.
Wire rope capacities the maximum amount of wire rope on the drum must leave a freeboard to the top of the drum flange of 1.5 x wire rope diameter to prevent the wire rope coming off the drum.
