- Lifting Equipment
-
Height Safety
Height Safety Equipment
- Material Handling & Jacking Equipment
- Shop by Brand
- Clearance
-
Contact
Get In Touchsales@liftingsafety.co.uk +44 (0)1977 684 600
Forklift Truck Tine/Fork Extensions
All of our forklift extension tines are designed to simply slide over your existing forklift tines, and they are supplied with a heel pin as standard to prevent the extensions from slipping off the tine.
Standard extensions start from 1200 mm in length, increasing up to 2 metres or 2250 mm on some variants.
By far the most common type of fork extensions are flat, similar to standard forklift truck tines, but we also have the option of triangular or cylindrical round top extensions that are more suited for the handling of cylinder-shaped loads such as coils or rolls. The radiused top extensions are also preferred for applications where sharp corners could damage the product.
Custom design and bespoke length extensions are also available on special request. Please get in touch to find out more.
Forklift Extension Types
Open Base Forklift Truck Tine Extensions
Forklift extension forks, manufactured to conform to the ISO 13284 British standard. Options range from 1500mm up to 2000mm long.
Model: OBFE-618
From £472.50
Closed Base Forklift Truck Tine Extensions
Forklift extension forks with bracing along the base which prevents the extension rising up the fork when a load is applied to the tip. Length range from 1200mm to 2250mm.
Model: CBFE-620
Request Quote
Triangular Shaped Fork Truck Tine Extensions
Triangular fork extensions with open base for picking up cylindrical loads. Length options from 1525mm to 1830mm.
Model: TFE-619
From £731.25This enables safe carrying of cylindrical loads without them falling off as they just slip over the forklift truck forks.
Radius (Round Top) Fork Lift Truck Tine Extensions with Open Base
Radiused fork extensions to protect against damage caused by square edges on standard tines or extensions. Standard lengths from 1200mm to 1500mm.
Model: RFE-621
From £736.88Slip over forks to increase the load bearing areas to allow loads such as small steel coils, coils of wire, plastic etc. to be carried without fork edges causing damage.
Forklift extension forks, manufactured to conform to the ISO 13284 British standard. Options range from 1500mm up to 2000mm long.
Forklift extension forks with bracing along the base which prevents the extension rising up the fork when a load is applied to the tip. Length range from 1200mm to 2250mm.
Triangular fork extensions with open base for picking up cylindrical loads. Length options from 1525mm to 1830mm.
Radiused fork extensions to protect against damage caused by square edges on standard tines or extensions. Standard lengths from 1200mm to 1500mm.