3M

Sala Sewed Fall Arrest Lanyard Available in 1, 1.3 , and 2m. Comply with the EN354 standard.

Polyamide white colour, 10.5mm diameter, identification thread, yellow and red wear indicator

System breaking strength ->2200 daN

Sala "Exofit Nex" Rope Access Suspension Fall Arrest Harness with Front and Rear 'D' Rings & Work Positioning Belt- Sala multi task harness which will give operatives access to almost any area in safety. Conformity: EN361, EN358, EN813.

Available in Blue or Black

SALA Exo-Fit  Derrick Harness Especially designed for the oil extraction worker. It includes connection for optional derrick belt which provides the worker with restraint and comfort with the large frontal pad while positioning for the next drilling pipe. Seat sling as an option to reduce fatigue, whilst in suspension or work position and for use with man riding systems. Available in sizes S, M, L and XL.

Exclusive design provides both fall arrest with assisted rescue capabilities and automatic self rescue for ultimate versatility. When in Fall arrest mode, the Unit stops falls within few decimetres and limits the forces to 6kN for less for added safety. Features Assisted rescue procedures can then be implemented either at the mode selector or remotely with a First-Man-Up™ pole. Self rescue mode automatically lowers the user to the next level after a fall. Lightweight and long lasting durable reinforced plastic housing. Incorporates a built-in carrying handle for easy transportation. 15 m cable extends and retracts automatically enabling the user to move around the work area protected. i-Safe™ Intelligent Safety System is built-into every unit to track inspections, control inventory and manage information. Designed to meet worldwide standards including CE EN360 and EN341.

The UCL Advanced Digital Series Winches are rated for a maximum working load of 450 lbs with an 11:1 safety factor. This winch offers 1 or 2 cranking speeds capable of retrieval/descent at average speeds from 13ft/min (4 m/min) up to 30 ft/min (9 m/min). Available in 3 standard sizes, 100, 200 and 300 Series winches holding up to 300 feet of 3/16" (5mm) diameter cable/rope. This winch also accommodates various diameters of cables up to 3/8" and ropes up to 5/8". All cable/rope assemblies come with a double locking swivel snap hook with overload indicator.

The perfect solution for confined space entry / retrieval applications. Connects via a single suitable anchorage point. The 2 piece system attaches with a carabiner on the universal bracket to any suitable anchor point, allowing you to work in any direction from any angle. The system has a unique swivle head that rotates 360 degrees, providing unparalleled flexibility in both vertical and horizontal confined-space entries.
Overall length adjusts from either 4’ - 7’ (1.2 m - 2.13 m) or 6’ - 10’ (1.8 m - 3.05 m) for positioning attendant for working in close quarters. Custom Pole Hoist sizes are available.

SALA 2100080 Door and Window Anchorage Bar installs in seconds, providing a fast, simple and safe attachment point for your fall arrest system. Complete peace of mind with this anchor because it is designed to install without compromising the structure in any way, simply compress the device between the vertical sides of the window or door and tighten. Available to fit door or window sizes from 55cm to 130cm.

With re-useable D ring assembly, just install a new bolt and it's ready to use again. It has a rugged design for harsh environments with no moving or fragile parts to foul-up. Safe “hook-up” indicator notifies the user the anchor has been installed properly. Available with 3 different amounts of bolts - D ring assembly with 1 Bolt, D ring assembly with 6 bolts, and D ring assembly with 12 bolts.

This allows user to work at different locations where a socket is pre-installed, with a single detent pin. Lightweight and portable, allowing user to easily move from job site to job site, can keep attached to lanyard at all times. Available with 3 different options - assembly including pin, socket and cap, detent pin, detent socket and cap.

Anchor points are suitable for use as a single attachment point for fall arrest or fall restraint by a single user. The anchor detailed in this document conforms to EN 795 and EN 50308. In addition the oversize washer version offer sealing detail against water ingress as it is designed for the toe of a wind turbine nacelle cover.

This is a portable and lightweight anchorage point which is easy to install and can be adjusted in seconds, also it can be used either horizontally or vertically. Available to fit beam flanges up to 91.44cm width and 6.5cm thickness.

The Trolley can be adjusted to the exact size of the beam flange, by a series of holes in the load bar, and a dial system on the side plates. The side plates of the Trolley may be demounted, for a mid-span installation, or for removal for inspection. Each of the trolleys 4 steel wheels contain non corrosive double-shielded wheel bearings to insure the smoothest movement during use.

SALA Counterweight Anchorage has a non-penetrating design which does not attach to the working surface reducing the possibility of damage, with built in shock absorbing post providing added safety to the user and structure. Suitable for use in general concrete, steel or asphalt construction. Freestanding Counterweight Anchor includes sixteen 20.3kg plates, roof post, base and D ring. Single Counterweight only 20.3kg.

Sala AT052/1 Pulley Wheel for an Anchorage System with Screwgate Karabiner is a pulley for guiding a winch cable. The hook has an opening of 17mm made from high strength steel. The maximum load capacity is 600kg.

There are many instances where a horizontal lifeline to ensure the safety of a user is the best practical option, but the time spent assembling and installing the system make it impractical to do so. What is needed is a quick means of installing the system so work is unaffected. The line can be used in any length up to either 10 or 20m depending on the version bought.

SALA EZ-Line Retractable Temporary Fall Arrest Lifeline is easy to install, remove and store. EZ-Line’s innovative retractable design allows the user to quickly and efficiently set-up any length of system in only seconds and dismantle it just as quick.

The anchorage point for connection to a suitable and strong enough support structure to create a fall arrest anchorage point, restraint anchorage point or for performing a rescue of a casualty having fallen when working at height. This is a permanent anchorage point on a structure with minimum structure strength of 10kN.

Corrosion resistant made from stainless steel this is an anchorage eye made from stainless steel and is used for personal fall arrest systems (single person) or for restraint/rescue.

Screw locking Karabiner in black adonized aluminium alloy. With a 17mm opening. Complies with standards 0086 EN 362 0082/052/160/10/94/0105 1/08/95.

Quick links enable a semi-permanent connection between different parts of a Height Safety Kit, such as between a harness and a lanyard, or a belt and a work positioning lanyard. Made from stainless steel with a breaking strength of >12kN and an opening of 7.5mm.

This scaffold hook karabiner is a double safety self locking karabiner made from galvanised steel giving a breaking strength of >23kN and an opening of 50mm.

Protecta AJ593 self locking 1/4 turn twistlock pear shaped karabiner is made from galvanised steel giving a breaking strength of >25kN and an opening of 50mm. This also comes with a pin.

Protecta pro stretch energy absorbing lanyard gives energy absorption over entire length meaning a better balanced lanyard, with no bulky energy absorber to weigh down the user. The Lanyard is also elasticated over its length to retain the maximum desired length, but doesn’t trail on the ground or get in the way. Available in sizes 1.5m, 1.75m and 2m.

This unit is designed for the descent and ascent of a worker in a confined space. It has a built in fixing plate, so is simple to fit to any tripod or swivelling bracket. It has an anti-release safety system with an auto locking friction lining. Winch adaptable to PROTECTA tripod AM100 Anti-release safety system Reduction ratio: 4,5/1 Average speed: 10 cm per handle revolution Stainless steel 20 m with snap hook swivel.

Features telescopic adjustable feet, automatic locking legs when opened, stabiliser pad on each foot, 4 high-strength anchorage points, aluminium section design, cast head in high-strength Aluminium and 8 height setting points. Available with different options - No Retrieval Block, 15m Retrieval Block or 25m Retrieval Block. Also, a choice of rescue winch options - No Rescue Winch or 20m Rescue Winch. Available with a carry bag for the tripod.

Protecta AG570 Single Pulley with Moving Sides is a lightweight design single sheave pulley for the deflection of ropes up to 16mm diameter when used working at height.

Protecta AC4XX 10.5mm Braided Rope Anchorage Line with Screwgate Karabiner is designed for use with VIPER. With a multi-braid core for extra strength, and yellow and red wear indicator. Available in 10m, 20m, 30m, 40m, 50m, and 60m lengths.

Rope specification: Diameter: 10,5 mm (without tension); Polyamide; Multibraid core; Color : white; identification thread; yellow + red wear indicator; automatic snap hook: AJ565; system breaking strength > 2200 daN.

Rope Specifications: Polyamide rope; 14 mm diameter; Available in short lengths from 5 metre; 3 strand construction; Identification threads built into the rope; Yellow and red wear indicator also weaved into the rope;