Abtech Safety

SLIXHALV stretcher which excels in tight confined spaces, making it ideal for various environments such as narrow corridors and sewer pipes as well as railway embankments and open ground.

The flexible material combined to a smooth finish allows easy sliding and permits the stretcher to be rolled width-ways or length-ways to facilitate transport.

Bariatric stretcher designed for the rescue, transport and evacuation of clinically obese persons

Designed for difficult confined spaces. The articulated skirt at the bottom of the stretcher can be removed.

1.25 to 1.75m restraint lanyard with karabiner each end.

A simple, low cost, robust stretcher that can be deployed very quickly.

Fall Arrest Inertia Reel SRL Block Certified to BS EN 360. Max user weight: 140kg. 30m galvanised cable with snap hook termination. Optional Brackets

Max user weight: 140kg. Certified to BS EN 360 and BS EN 1496 Type B. Optional Brackets.

30m personnel winch designed for use in a wide variety of confined space, work positioning, rescue and fall protection applications.

30m Confined Space Entry System for Manriding, Fall Arrest and Rescue Applications.

Small Upper Davit, with an adjustable offest. To be used with a Lower Davit and Base. 495mm to 737mm Reach, 1168mm to 1416mm Height.

Large Upper Davit, with an adjustable offset. To be used with a Lower Davit and Base. 495mm to 737mm Reach, 1473mm to 1702mm Height

Small Lower Davit to be used with an Upper Mast Davit and Base. 1016mm Height.

Large Lower Davit to be used with an Upper Mast Davit and Base. 1321mm Height.

The counterweight has independently adjustable legs for use on uneven ground. Utilises readily available barbell type weight plates (not included)

Flush Floor Mount for Existing Concrete, designed to be used with Abtech Safety Davit Arms. To be bolted into existing concrete.

Flush mounting base to be set in to freshly poured concrete, designed to be used with Abtech/Tuff Built Davit Arms.

A robust adjustable barrel mount for fitting onto shoarings. Designed specifically for use with Abtech/Tuff Built man-riding davit systems.

Floor mounting base designed for bolting to an existing level floor. To be used with Abtech/Tuff Built davit arms.

4 point wall mounting base, designed to be used with the Abtech/Tuff Built range of davit arms.

Barrel mount socket, designed to be used with Abtech/Tuff Built davit arms. To fit shoarings with a max width of 2.25” (57mm).

Pole Hoists allows for vertical or horizontal confined space entry-retrieval, and rescue as well as fall protection and work positioning.

Steel screw-gate karabiner with a 45kN rating and a 25mm gate opening.

Scaffold hook with a 22kN rating and a 65mm opening.

10mm Delta Link with 45kN Rating. 10mm Gate Opening.

Semi-circular D-link mallion with a 45kN rating and 10mm gate opening.

7mm Oval Link. Rating 25kN - Gate Opening 7mm

Pear shaped link with 36kN rating and a 10mm gate opening.

Electrically insulated helmet according to module C2 in EN 397, 440 V AC. Steering wheel adjustment for smooth size adjustment, fits XS-XXL (53-63cm).

Elasticated (34cm to 52cm) tool safety lanyard with velcro wrist attachment.

Set includes 1 x elasticated lanyard with karabiners each end and 3 x D-link rope toggle snare ropes.

Fixed length tool lanyard with adjustable toggle for holding a variety of tool types. Max. tool weight 4kg

Coiled wire rope tool holder with protective plastic cover and screw-lock connectors each end. Stretches between 45cm and 125cm.

Polyester tool lanyard with elastic dampening function. Stetches between 1m and 1.6m.

EN 361 & EN 1497 rescue harness complete with manual buckles, front and rear attachment points plus an extra D-ring attachment point for rescue means.