Abtech Man-riding, Fall Arrest and Rescue Davits and Components
To use this davit system as a man-riding / fall arrest system, both a man-riding/rescue with and a secondary fall arrest block is required.
Abtech Small Upper Davit Section - 495mm to 737mm Reach - 1168mm to 1416mm Height
Abtech Large Upper Davit Section - 495mm to 737mm Reach - 1473mm to 1702mm Height
Abtech Small Lower Davit Section - 1016mm Height
Abtech Large Lower Davit Section - 1321mm Height
Abtech Counter-Weight Base
Abtech Pole Hoist Arm, 140kg capacity
Abtech Tuff Built 30m Man-riding and Rescue Winch
Abtech Bolt-down Floor Mount (Surface Mount) Socket
Abtech Wall Mount Socket
Abtech Flush Floor Mount Socket - Existing Concrete
Abtech Flush Floor Mount Socket - Fresh Concrete
Abtech Adjustable Barrel Mount Base - Adjusts between 57mm & 635mm
Abtech Barrel Mount Sleeve
Small Upper Davit, with an adjustable offest. To be used with a Lower Davit and Base.
Large Upper Davit, with an adjustable offset. To be used with a Lower Davit and Base.
Small Lower Davit to be used with an Upper Mast Davit and Base
Large Lower Davit to be used with an Upper Mast Davit and Base
The counterweight has independently adjustable legs for use on uneven ground. Utilises readily available barbell type weight plates (not included)
Pole Hoists allows for vertical or horizontal confined space entry-retrieval, and rescue as well as fall protection and work positioning.
30m personnel winch designed for use in a wide variety of confined space, work positioning, rescue and fall protection applications.
Floor mounting base designed for bolting to an existing level floor. To be used with Abtech/Tuff Built davit arms.
4 point wall mounting base, designed to be used with the Abtech/Tuff Built range of davit arms.
Flush Floor Mount for Existing Concrete, designed to be used with Abtech Safety Davit Arms. To be bolted into existing concrete.
Flush mounting base to be set in to freshly poured concrete, designed to be used with Abtech/Tuff Built Davit Arms.
A robust adjustable barrel mount for fitting onto shoarings. Designed specifically for use with Abtech/Tuff Built man-riding davit systems.
Barrel mount socket, designed to be used with Abtech/Tufff Built davit arms. To fit shoarings with a max width of 2.25” (57mm).