Limited time offer, free delivery on all online orders!
*Minimum goods order value: £100, otherwise an admin fee of £25 will apply. Online orders are possible to UK Mainland only, but we export globally.
LIFTINGSAFETY
  1. Home/
  2. Lifting Equipment/
  3. Specialist Lifting Equipment/
  4. Stainless Steel Lifting Equipment/
  5. Stainless Steel Lifting Eyebolts & Lifting Points/
  6. Codipro SS.DSR Stainless Steel Double Swivel Lifting Point
Codipro SS.DSR Stainless Steel Double Swivel Lifting Point

Codipro SS.DSR Stainless Steel Double Swivel Lifting Point

316L stainless steel male bolt-on double articulated swivel load ring (hoist ring) with lifting eye. M6 to M30 metric and 1/4" to 1" imperial thread.

Model: 

SS DSR / SSDS-4503

Codipro SS.DSR Stainless Steel Double Swivel Lifting Point

Codipro SS.DSR Lifting Point Codipro SS.DSR Lifting Point SS.DSR Underside Two Sizes of Codipro SS.DSR Codipro SS.DSR M20 Pivoted Codipro SS.DSR M30 Pivoted Two Ways of Tightening
More from:
Codipro

The SS.DSR lifting ring is a double swivel ring. It is designed for rotations under load. Its double swivel ensures perfect alignment with the sling. It is composed of a stainless-steel lifting ring providing perfect corrosion resistance. This ensures optimal longevity of the lifting ring and allows it to be used in humid, chemical, marine environments, etc. The lifting ring can swivel 180° but has a rotating range of 360°. It can be used for any lifting configuration (straigt lift, with angle, tilting, rotating).

The SS.DSR lifting ring is equipped with a protective crossbar and is approved for all lifting configurations from 0° to 90°. The DSR is designed for use in a temperature range from -20°c to +200°c and carries various markings, including CE, WLL and tightening torque. It is manufactured in compliance with the REACH regulation and is also available in female, steel and quick lift. The ring swivels 180°, but has a rotating range of 360°.

All SS.DSR lifting rings have a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.

The female version (FE.SS.DSR) of the SS.DSR model is also available.

  • Swivelling under load
  • 360° rotation
  • 180° articulation
  • Safety factor of 5:1 and of 4:1
  • Control anti-crack on 100% of products
  • Fatigue test
  • Stainless Steel
  • Torque key
  • Two ways of tightening
  • Individual traceability number
    • Use Coditracer to verify the authenticity of your Codipro lifting point or access user instructions, technical literature, angle load charts, the certificate of conformity, the inspection procedures or to guarantee your Codipro products.
  • Other specific/special variants are available on request
  • Delivered with certificate of compliance
  • Tested to EN 1677-1

Dimensions & Specifications Metric Threads

Reference Diameter SF 5:1 WLL (t) SF 4:1 WLL (t) L (Max.) (mm) Torque (Nm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (mm)
SS.DSR M 6 M 6 (x1) 0,10 0,15 15 4 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 8 M 8 (x1,25) 0,30 0,30 16 6 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 10 M 10 (x1,50) 0,50 0,50 16 10 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 12 M 12 (x1,75) 0,80 0,80 19 15 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 14 M 14 (x2) 1,00 1,00 29 30 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR M 16 M 16 (x2) 1,40 1,50 26 50 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR M 18 M 18 (x2,5) 1,40 1,50 30 70 8 20 44 40 45 53 38 17 76 13 1,0
SS.DSR M 20 M 20 (x2,5) 1,40 1,60 30 100 8 20 44 40 45 53 38 17 76 13 1,0
SS.DSR M 22 M 22 (x2,5) 2,20 2,20 42 120 14 24 62 55 58 83 56 25 115 19 2,5
SS.DSR M 24 M 24 (x3) 2,70 2,70 42 160 14 24 62 55 58 83 56 25 115 19 2,6
SS.DSR M 27 M 27 (x3) 2,80 2,90 42 200 14 24 62 55 58 83 56 25 115 19 2,7
SS.DSR M 30 M 30 (x3,5) 3,00 3,50 47 250 14 24 62 55 58 83 56 25 115 19 2,8
SS.DSR Metric Dimensional Drawing

Dimensions & Specifications UNC Threads

Reference Diameter SF 5:1 WLL (lbs) SF 4:1 WLL (lbs) L (Max.) (mm) Torque (Nm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
SS.DSR U 025 UNC 1/4"-20 400 500 13 3 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 516 UNC 5/16’’-18 600 650 15 5 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 038 UNC 3/8"-16 1,000 1,000 17 8 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 050 UNC 1/2"-13 1800 1850 21 12 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 058 UNC 5/8"-11 2500 3,000 27 40 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR U 075 UNC 3/4"-10 3600 3800 30 80 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR U 078 UNC 7/8"-9 5,000 5100 33 90 14 24 62 55 58 83 56 25 115 19 2,5
SS.DSR U 100 UNC 1"-8 6,000 6,000 36 125 14 24 62 55 58 83 56 25 115 19 2,6
SS.DSR Imperial UNC Dimensional Drawing
Part N° Thread Size Thread Length (L1) (mm) SF 5:1 WLL (t) SF 4:1 WLL (t) Weight (kg) Sale Price (Ex. VAT) Quantity
4503-T25877
SS.DSR M6 		M6 (x1) 15 0.1 0.15 0.3
( £156.00 )
£118.56
4503-T25878
SS.DSR M8 		M8 (x1,25) 16 0.3 0.3 0.3
( £158.00 )
£120.08
4503-T25879
SS.DSR M10 		M10 (x1,50) 16 0.5 0.5 0.3
( £159.00 )
£120.84
4503-T25880
SS.DSR M12 		M12 (x1,75) 19 0.8 0.8 0.3
( £162.00 )
£123.12
4503-T25881
SS.DSR M 14 		M14 (x2) 29 1 1 0.9
( £238.00 )
£180.88
4503-T25882
SS.DSR M16 		M16 (x2) 26 1.4 1.5 0.9
( £238.00 )
£180.88
4503-T25883
SS.DSR M18 		M18 (x2,5) 30 1.4 1.5 1
( £250.00 )
£190.00
4503-T25884
SS.DSR M20 		M20 (x2,5) 30 1.4 1.6 1
( £250.00 )
£190.00
4503-T25885
SS.DSR M22 		M22 (x2,5) 42 2.2 2.2 2.5
( £433.00 )
£329.08
4503-T25886
SS.DSR M24 		M24 (x3) 42 2.7 2.7 2.6
( £433.00 )
£329.08
4503-T25887
SS.DSR M27 		M27 (x3) 42 2.8 2.9 2.7
( £450.00 )
£342.00
4503-T25888
SS.DSR M30 		M30 (x3,5) 47 3 3.5 2.8
( £450.00 )
£342.00
Availability Usually 5-7 Working Days
Add to Shopping Basket
Please Note: Buy online is only available to UK mainland customers and addresses.
Description

The SS.DSR lifting ring is a double swivel ring. It is designed for rotations under load. Its double swivel ensures perfect alignment with the sling. It is composed of a stainless-steel lifting ring providing perfect corrosion resistance. This ensures optimal longevity of the lifting ring and allows it to be used in humid, chemical, marine environments, etc. The lifting ring can swivel 180° but has a rotating range of 360°. It can be used for any lifting configuration (straigt lift, with angle, tilting, rotating).

The SS.DSR lifting ring is equipped with a protective crossbar and is approved for all lifting configurations from 0° to 90°. The DSR is designed for use in a temperature range from -20°c to +200°c and carries various markings, including CE, WLL and tightening torque. It is manufactured in compliance with the REACH regulation and is also available in female, steel and quick lift. The ring swivels 180°, but has a rotating range of 360°.

All SS.DSR lifting rings have a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.

The female version (FE.SS.DSR) of the SS.DSR model is also available.

  • Swivelling under load
  • 360° rotation
  • 180° articulation
  • Safety factor of 5:1 and of 4:1
  • Control anti-crack on 100% of products
  • Fatigue test
  • Stainless Steel
  • Torque key
  • Two ways of tightening
  • Individual traceability number
    • Use Coditracer to verify the authenticity of your Codipro lifting point or access user instructions, technical literature, angle load charts, the certificate of conformity, the inspection procedures or to guarantee your Codipro products.
  • Other specific/special variants are available on request
  • Delivered with certificate of compliance
  • Tested to EN 1677-1

Dimensions & Specifications Metric Threads

Reference Diameter SF 5:1 WLL (t) SF 4:1 WLL (t) L (Max.) (mm) Torque (Nm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (mm)
SS.DSR M 6 M 6 (x1) 0,10 0,15 15 4 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 8 M 8 (x1,25) 0,30 0,30 16 6 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 10 M 10 (x1,50) 0,50 0,50 16 10 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 12 M 12 (x1,75) 0,80 0,80 19 15 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR M 14 M 14 (x2) 1,00 1,00 29 30 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR M 16 M 16 (x2) 1,40 1,50 26 50 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR M 18 M 18 (x2,5) 1,40 1,50 30 70 8 20 44 40 45 53 38 17 76 13 1,0
SS.DSR M 20 M 20 (x2,5) 1,40 1,60 30 100 8 20 44 40 45 53 38 17 76 13 1,0
SS.DSR M 22 M 22 (x2,5) 2,20 2,20 42 120 14 24 62 55 58 83 56 25 115 19 2,5
SS.DSR M 24 M 24 (x3) 2,70 2,70 42 160 14 24 62 55 58 83 56 25 115 19 2,6
SS.DSR M 27 M 27 (x3) 2,80 2,90 42 200 14 24 62 55 58 83 56 25 115 19 2,7
SS.DSR M 30 M 30 (x3,5) 3,00 3,50 47 250 14 24 62 55 58 83 56 25 115 19 2,8
SS.DSR Metric Dimensional Drawing

Dimensions & Specifications UNC Threads

Reference Diameter SF 5:1 WLL (lbs) SF 4:1 WLL (lbs) L (Max.) (mm) Torque (Nm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
SS.DSR U 025 UNC 1/4"-20 400 500 13 3 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 516 UNC 5/16’’-18 600 650 15 5 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 038 UNC 3/8"-16 1,000 1,000 17 8 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 050 UNC 1/2"-13 1800 1850 21 12 8 16 32 30 30 39 28 13 53 9,5 0,3
SS.DSR U 058 UNC 5/8"-11 2500 3,000 27 40 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR U 075 UNC 3/4"-10 3600 3800 30 80 8 20 44 40 45 53 38 17 76 13 0,9
SS.DSR U 078 UNC 7/8"-9 5,000 5100 33 90 14 24 62 55 58 83 56 25 115 19 2,5
SS.DSR U 100 UNC 1"-8 6,000 6,000 36 125 14 24 62 55 58 83 56 25 115 19 2,6
SS.DSR Imperial UNC Dimensional Drawing
Downloads

ssdsr.pdf

Codipro SS.DSR Product Datasheet

(approx. 0.5Mb) load-angle-chart-ssdsr-ssfe-dsr.pdf

Load Angle Chart

(approx. 2.6Mb) codipro-instructions-for-use-notice-dinstructions-072023.pdf

User Instructions

(approx. 1.6Mb) ss-dsr-m6.zip

SS.DSR M6 STEP File

(approx. 0.7Mb) ss-dsr-m8.zip

SS.DSR M8 STEP File

(approx. 0.7Mb) ss-dsr-m10.zip

SS.DSR M10 STEP File

(approx. 0.7Mb) ss-dsr-m12.zip

SS.DSR M12 STEP File

(approx. 0.7Mb) ss-dsr-m14.zip

SS.DSR M14 STEP File

(approx. 0.7Mb) ss-dsr-m16.zip

SS.DSR M16 STEP File

(approx. 0.7Mb) ss-dsr-m18.zip

SS.DSR M18 STEP File

(approx. 0.7Mb) ss-dsr-m20.zip

SS.DSR M20 STEP File

(approx. 0.7Mb) ss-dsr-m22.zip

SS.DSR M22 STEP File

(approx. 0.8Mb) ss-dsr-m24.zip

SS.DSR M24 STEP File

(approx. 0.7Mb) ss-dsr-m27.zip

SS.DSR M27 STEP File

(approx. 0.8Mb) ss-dsr-m30.zip

SS.DSR M30 STEP File

(approx. 0.8Mb) ss-dsr-u025.zip

SS.DSR U 025 STEP File

(approx. 0.7Mb) ss-dsr-u516.zip

SS.DSR U 516 STEP File

(approx. 0.7Mb) ss-dsr-u038.zip

SS.DSR U 038 STEP File

(approx. 0.8Mb) ss-dsr-u050.zip

SS.DSR U 050 STEP File

(approx. 0.7Mb) ss-dsr-u058.zip

SS.DSR U 058 STEP File

(approx. 0.8Mb) ss-dsr-u075.zip

SS.DSR U 075 STEP File

(approx. 0.8Mb) ss-dsr-u078.zip

SS.DSR U 078 STEP File

(approx. 0.8Mb) ss-dsr-u100.zip

SS.DSR U 100 STEP File

(approx. 0.8Mb)
Pricing (Buy/Quote)

You May Also Like

Container eye fittings for lifting from the top blocks of a shipping container. 56 tonne capacity per set of 4.
Camlok CLT Container Top Lifting Lugs
£749.76
New generation swivel lifting ring with a lower profile and higher capacities. 0.50t to 22.5t, M8 to M64
Yoke "Type 231" Metric Thread Swivel Hoist Ring, Standard Length Bolt
Was £44.00
Now £37.40
3/8" to 3" imperial threaded (BSW, UNC, BSF or UNF) collar lifting eye bolts. 250kg to 30 tonne lifting capacity options.
Imperial Thread Collared Eye Bolt to ISO3266/BS4278
From £3.04
Gunnebo container lug for lifting shipping containers in their lower fittings.
Gunnebo "GrabiQ CH3 Container Hook" Chain Lifting Hook, WLL 12.5 tonne
Request Quote
Bolt down swivel lifting and lashing point, with metric (M8-M48) or UNC (5/16"-2") thread. 700kg to 3.2t.
Gunnebo "RELP" Rotating Eye Bolt / Lifting Point
Request Quote
Rotating lifting eye bolt for direct attachment to lifting chain. Imperial UNC thread. 200kg to 8.2t lifting capacity.
Crosby 'HR125C' Swivel Hoist Ring with Clevis Chain Connection
Request Quote
Contact Us About This Product

Recently Viewed Products

316L stainless steel male bolt-on double articulated swivel load ring (hoist ring) with lifting eye. M6 to M30 metric and 1/4

Codipro SS.DSR Stainless Steel Double Swivel Lifting Point

Was £156.00
Now £118.56
Metric thread rotating load ring suitable for all loading in any direction. Swivels 360 degrees, pivots 180 degrees. 300kg to 40 tonne, M8-M100.

RUD "VWBG-V" & "VWBG" Swivel Lifting Point

Was £90.82
Now £70.38
Crosby Utility Wedge Sockets.

Crosby 'US422T' Utility Wedge Sockets, Size Range for 10mm to 32mm Rope Dia.

Request Quote

LiftingSafety uses cookies to improve your user experience.

Find out more