Stainless Steel Lifting Eyebolts

Quick Ref: CN-1844
Stainless Steel Lifting Eyebolts

Top Quality Made in the UK, High Tensile 316 Stainless Steel Collard Eye Bolt Generally to the Same Pattern as BS4278 with Course Pitch M8 to M36. Eyebolts under 12mm are not recommended for lifting. Product image for display purposes only. Material: As specified by BS 4278 Hardened and Tempered S.W.L. Shown at 0° (vertical) angle of lift. Other diameters, thread forms and pitches available on application. High tensile 316 stainless steel construction.
Crosby Stainless Steel Swivel Hoist Ring. On our Crosby SS-125 and SS-125M Stainless Steel Swivel Hoist Rings, all the components are 316 stainless steel, except bolt retainers, which are made from 15-7 PH (UNS 15700) magnetic stainless steel. They are available in capacities from 400 lbs. to 25,000 lbs.(200kg to 22.3 tonne) and most importantly they are rated at 100% at 90 degree angle. Each product has a product identification code (PIC) for material traceability, along with the Working Load Limit and the name Crosby or "CG" stamped into it. Individually proof tested to 2 times the Working Load Limit with certification. Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. Washer is colour coded for easy identification (Red - UNC thread).


Rud INOX-STAR Stainless Steel Eyebolt. The RUD Pentagonal design is clearly distinctive when compared to the DIN 580 eye bolt. All Eyebolts are marked with a clear WLL indication for the most unfavourable load direction. Manufactured to an extremely High Quality, With a forged ring body out of the material 1.4462, stainless steel, and then 100% electromagnetic crack detected and with a 4 :1 design factor.

Crosby Screw Eye Bolts. The Crosby G275 Screw threaded Eyebolts are made from forged Steel and are quenched and Tempered / hot dip galvanised.
Stainless Steel Weld-On Load Ring. A stainless steel load ring for welding made of the material 1.4571 (stainless steel). In it's welded condition this is resistant against inter-crystalline corrosion, when being used in permanent operation, up to 400°C.

The chemical resistance and resistance against pitting by chloride media has been increased due to the Mo contents, and for this reason, the material 1.4571 is widely used in the chemical industry, petroleum, coal-tar chemistry and textile industries.
Top Quality Made in the UK, Stainless Steel (grade 316) Bownuts Based on BS3974 Part 1 1974, with Metric Course Thread M10 to M36. Our grade 316 stainless steel bow nuts are based upon the British Standard BS3974 and are available in the following sizes and capacities: 360kg (m10), 530kg (M12), 1010kg (M16), 1580kg (M20), 2280kg (M24), 3650kg (M30) and 5340kg (M36). Supplied as standard with metric threads, these bow nuts can be threaded as the customer requires, with such thread types as BSW, UNC or UNF etc...
Bolt-on Swivel Load Rings (Hoist Ring) with Link - Thread Options form M24 to M56

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.