- Home/
- Lifting Equipment/
- General Industrial Lifting Equipment/
- Lifting Eyebolts & Eye Nuts, Lifting and Lashing Points/
- ISO Container Lifting Lugs, Bottom, Top and Side Lifting/
- Gunnebo "GrabiQ CH3 Container Hook" Chain Lifting Hook. 12.5 tonne

Gunnebo "GrabiQ CH3 Container Hook" Chain Lifting Hook. 12.5 tonne
Gunnebo chain sling container lifting lug.
GrabiQ CH3 / GCCH-4027








Especially made for lifting containers from the lower fitting points.
- Large eye for easy connection to wire rope or chain legs.
- Full traceability
- Proof tested and certified
CH-3 should always be used with, either a 2 or 4 point spreader beam / spreader bar.
CH-3 is available as a straight and turned 45 degrees. To avoid the risk of disengagement during use, a tolerance of +- 15 degrees from nominal should be adhered to.
We recommend that you use a spreader and lift from the bottom when the container is loaded as this is where the container is strongest.
If a two point connection spreader is used the WLL of CH-3 is to be reduced due to the angles.
A 4-leg sling is also possible to use but then you need to:
- Make sure the hooks and chains can move free to the intended load angles without obstruction.
- Only lift in the bottom corners.

CH-3 Straight

CH-3 turned 45° left (Marked 'V')

CH-3 turned 45° right (Marked'H')
GrabiQ CH-3 Container Hook
Type | WLL t | L | B | H | F | G | E | Weight kgs |
CH-3, Straight | 12.5 | 187 | 70 | 46 | 25 | 47 | 75 | 3.9 |
CH-3, 45° left | 12.5 | 187 | 70 | 46 | 25 | 47 | 75 | 3.9 |
CH-3, 45° right | 12.5 | 187 | 70 | 46 | 25 | 47 | 75 | 3.9 |

*Design Factor 4:1 Proof tested and certified
Left hook marked with “V” Righ hook marked with “H”

Straight Lift with 4 x CH-3 Straight

Angular Lift with 2 x CH-3, 45° left & CH-3, 45° Right
Especially made for lifting containers from the lower fitting points.
- Large eye for easy connection to wire rope or chain legs.
- Full traceability
- Proof tested and certified
CH-3 should always be used with, either a 2 or 4 point spreader beam / spreader bar.
CH-3 is available as a straight and turned 45 degrees. To avoid the risk of disengagement during use, a tolerance of +- 15 degrees from nominal should be adhered to.
We recommend that you use a spreader and lift from the bottom when the container is loaded as this is where the container is strongest.
If a two point connection spreader is used the WLL of CH-3 is to be reduced due to the angles.
A 4-leg sling is also possible to use but then you need to:
- Make sure the hooks and chains can move free to the intended load angles without obstruction.
- Only lift in the bottom corners.

CH-3 Straight

CH-3 turned 45° left (Marked 'V')

CH-3 turned 45° right (Marked'H')
GrabiQ CH-3 Container Hook
Type | WLL t | L | B | H | F | G | E | Weight kgs |
CH-3, Straight | 12.5 | 187 | 70 | 46 | 25 | 47 | 75 | 3.9 |
CH-3, 45° left | 12.5 | 187 | 70 | 46 | 25 | 47 | 75 | 3.9 |
CH-3, 45° right | 12.5 | 187 | 70 | 46 | 25 | 47 | 75 | 3.9 |

*Design Factor 4:1 Proof tested and certified
Left hook marked with “V” Righ hook marked with “H”

Straight Lift with 4 x CH-3 Straight

Angular Lift with 2 x CH-3, 45° left & CH-3, 45° Right
Products of Possible Interest
Contact Us About This Product
If you wish to receive a quote for this product, please use the 'Pricing' tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Buy/Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommend as we will be able to suit your needs much more efficiently.
Share this page!

Save this QR code
for use on Smart Phones