Limited time offer, free delivery on all online orders!
*Minimum goods order value: £100, otherwise an admin fee of £25 will apply. Online orders are possible to UK Mainland only, but we export globally.
LIFTINGSAFETY
  1. Home/
  2. Lifting Equipment/
  3. General Industrial Lifting Equipment/
  4. Lifting Eye Bolts & Nuts/
  5. Lifting Eye Bolts & Eye Nuts (Non-Swivel)/
  6. Metric Thread Lifting Eye Nuts (Non-Swivel)/
  7. Crosby "G400" Imperial Eye Nut
Crosby "G400" Imperial Eye Nut

Crosby "G400" Imperial Eye Nut

Crosby UNC imperial thread (1/4" to 2") lifting eye nuts. 240kg to 18,140kg.

Model: 

Crosby G-400 / CEN-2433

Crosby "G400" Imperial Eye Nut

Crosby G400 Eye Nuts
More from:
Crosby
  • Forged Steel - Quenched and Tempered.
  • Hot Dip galvanized.
  • Tapped with standard UNC class 2 threads after galvanizing.
  • Also available in blank (as forged) item (S-4028) or on request with metric threading ( M-400).
  • Recommended for In-Line pull.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.  Importantly, these products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26

Metric Dimensions & Specifications

Size No. "S" Stock Size (mm) G-400 Stock No. Std.Tap Size (in.) Working Load Limit (t)* Weight Each (kg) Dimensions (mm)
A C D E F J K N T W
1 6.35 1090438 1/4 .24 .04 31.8 19.1 25.4 19.1 12.7 17.5 16.0 11.7 43.7 7.85
2 7.85 1090474 3/8 .57 .08 41.1 25.4 30.5 21.1 14.2 20.6 22.6 14.7 53 10.4
3A 9.65 1090517 1/2 1.02 .13 51.0 31.8 36.6 27.4 20.6 25.4 27.7 18.5 63.5 12.7
4 12.7 1090535 5/8 1.63 .27 63.5 38.1 48.8 34.3 25.4 33.3 33.3 21.1 82.5 17.5
5 16 1090553 3/4 2.36 .45 76.0 44.5 58.0 40.4 28.4 38.1 39.9 26.7 100 21.3
6 19.1 1090571 7/8 3.27 .75 89.0 51.0 63.5 49.8 35.1 47.8 45.0 29.0 111 25.4
7 22.4 1090599 1 4.54 1.22 102 57.0 74.0 56.0 39.6 54.0 51.5 33.0 129 30.2
8 25.4 1090633 1-1/4 7.03 1.98 114 63.5 85.0 62.5 47.8 60.5 57.5 38.6 149 35.1
9 28.7 1090651 1-3/8 8.39 2.27 127 70.0 102 68.5 51.0 65.0 64.5 42.4 165 38.1
10 31.8 1090679 1-1/2 10.21 3.08 143 79.0 109 78.5 57.0 76.0 71.5 46.5 179 42.2
11 38.1 1090697 2 18.14 6.62 181 104 152 104 79.5 95.5 93.5 63.0 257 49.3
*Working Load Limit shown is for In-Line pull. Ultimate Load is 5 times the Working Load Limit.  Rating based on standard tap size.
Crosby G400 Eye Nut Dimensions
 

Imperial Dimensions & Specifications

Size
No.		 Stock
Size
(in.)
S		 G-400
Stock No.
Galv.		 Std.
Tap
Size		 Working Load Limit* (lbs.) Weight Each (lbs.)

Dimensions
(in.)
A C D E F J K N T W
1 .25 1090438 1/4 520 .09 1.25 .75 1.00 .75 .50 .69 .63 .46 1.72 .31
2 .31 1090474 3/8 1250 .17 1.62 1.00 1.20 .83 .56 .81 .89 .58 2.09 .41
3A .38 1090517 1/2 2250 .28 2.00 1.25 1.44 1.08 .81 1.00 1.09 .73 2.55 .50
4 .50 1090535 5/8 3600 .60 2.50 1.50 1.92 1.35 1.00 1.31 1.31 .83 3.25 .69
5 .63 1090553 3/4 5200 1.00 3.00 1.75 2.28 1.59 1.12 1.50 1.57 1.05 3.96 .84
6 .75 1090571 7/8 7200 1.65 3.50 2.00 2.50 1.96 1.38 1.88 1.77 1.14 4.40 1.00
7 .88 1090599 1 10000 2.69 4.00 2.25 2.92 2.21 1.56 2.13 2.02 1.30 5.10 1.19
8 1.00 1090633 1-1/4 15500 3.87 4.50 2.50 3.35 2.46 1.88 2.38 2.27 1.52 5.87 1.38
9 1.13 1090651 1-3/8 18500 5.00 5.00 2.75 4.00 2.69 2.00 2.56 2.53 1.67 6.51 1.50
10 1.25 1090679 1-1/2 22500 6.78 5.62 3.12 4.31 3.09 2.25 3.00 2.82 1.83 7.06 1.66
11 1.50 1090697 2 40000 14.60 7.12 4.10 6.00 4.09 3.13 3.75 3.68 2.49 10.13 1.94

* Ultimate Load is 5 times the Working Load Limit. Rating based on standard tap size

Part N° Size No. Stock Size Std.Tap Size (in.) Working Load Limit (t)* Weight Each (kg) Guide Price (Ex. VAT) Quantity
2433-T16180
1090438 		1 6.35 1/4 .24 .04 Quote Required
2433-T16181
1090474 		2 7.85 3/8 .57 .08 Quote Required
2433-T16182
1090517 		3A 9.65 1/2 1.02 .13 Quote Required
2433-T16183
1090535 		4 12.7 5/8 1.63 .27 Quote Required
2433-T16184
1090553 		5 16 3/4 2.36 .45 Quote Required
2433-T16185
1090571 		6 19.1 7/8 3.27 .75 Quote Required
2433-T16186
1090599 		7 22.4 1 4.54 1.22 Quote Required
2433-T16187
1090633 		8 25.4 1-1/4 7.03 1.98 Quote Required
2433-T16188
1090651 		9 28.7 1-3/8 8.39 2.27 Quote Required
2433-T16189
1090679 		10 31.8 1-1/2 10.21 3.08 Quote Required
2433-T16190
1090697 		11 38.1 2 18.14 6.62 Quote Required
Description

  • Forged Steel - Quenched and Tempered.
  • Hot Dip galvanized.
  • Tapped with standard UNC class 2 threads after galvanizing.
  • Also available in blank (as forged) item (S-4028) or on request with metric threading ( M-400).
  • Recommended for In-Line pull.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.  Importantly, these products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26

Metric Dimensions & Specifications

Size No. "S" Stock Size (mm) G-400 Stock No. Std.Tap Size (in.) Working Load Limit (t)* Weight Each (kg) Dimensions (mm)
A C D E F J K N T W
1 6.35 1090438 1/4 .24 .04 31.8 19.1 25.4 19.1 12.7 17.5 16.0 11.7 43.7 7.85
2 7.85 1090474 3/8 .57 .08 41.1 25.4 30.5 21.1 14.2 20.6 22.6 14.7 53 10.4
3A 9.65 1090517 1/2 1.02 .13 51.0 31.8 36.6 27.4 20.6 25.4 27.7 18.5 63.5 12.7
4 12.7 1090535 5/8 1.63 .27 63.5 38.1 48.8 34.3 25.4 33.3 33.3 21.1 82.5 17.5
5 16 1090553 3/4 2.36 .45 76.0 44.5 58.0 40.4 28.4 38.1 39.9 26.7 100 21.3
6 19.1 1090571 7/8 3.27 .75 89.0 51.0 63.5 49.8 35.1 47.8 45.0 29.0 111 25.4
7 22.4 1090599 1 4.54 1.22 102 57.0 74.0 56.0 39.6 54.0 51.5 33.0 129 30.2
8 25.4 1090633 1-1/4 7.03 1.98 114 63.5 85.0 62.5 47.8 60.5 57.5 38.6 149 35.1
9 28.7 1090651 1-3/8 8.39 2.27 127 70.0 102 68.5 51.0 65.0 64.5 42.4 165 38.1
10 31.8 1090679 1-1/2 10.21 3.08 143 79.0 109 78.5 57.0 76.0 71.5 46.5 179 42.2
11 38.1 1090697 2 18.14 6.62 181 104 152 104 79.5 95.5 93.5 63.0 257 49.3
*Working Load Limit shown is for In-Line pull. Ultimate Load is 5 times the Working Load Limit.  Rating based on standard tap size.
Crosby G400 Eye Nut Dimensions
 

Imperial Dimensions & Specifications

Size
No.		 Stock
Size
(in.)
S		 G-400
Stock No.
Galv.		 Std.
Tap
Size		 Working Load Limit* (lbs.) Weight Each (lbs.)

Dimensions
(in.)
A C D E F J K N T W
1 .25 1090438 1/4 520 .09 1.25 .75 1.00 .75 .50 .69 .63 .46 1.72 .31
2 .31 1090474 3/8 1250 .17 1.62 1.00 1.20 .83 .56 .81 .89 .58 2.09 .41
3A .38 1090517 1/2 2250 .28 2.00 1.25 1.44 1.08 .81 1.00 1.09 .73 2.55 .50
4 .50 1090535 5/8 3600 .60 2.50 1.50 1.92 1.35 1.00 1.31 1.31 .83 3.25 .69
5 .63 1090553 3/4 5200 1.00 3.00 1.75 2.28 1.59 1.12 1.50 1.57 1.05 3.96 .84
6 .75 1090571 7/8 7200 1.65 3.50 2.00 2.50 1.96 1.38 1.88 1.77 1.14 4.40 1.00
7 .88 1090599 1 10000 2.69 4.00 2.25 2.92 2.21 1.56 2.13 2.02 1.30 5.10 1.19
8 1.00 1090633 1-1/4 15500 3.87 4.50 2.50 3.35 2.46 1.88 2.38 2.27 1.52 5.87 1.38
9 1.13 1090651 1-3/8 18500 5.00 5.00 2.75 4.00 2.69 2.00 2.56 2.53 1.67 6.51 1.50
10 1.25 1090679 1-1/2 22500 6.78 5.62 3.12 4.31 3.09 2.25 3.00 2.82 1.83 7.06 1.66
11 1.50 1090697 2 40000 14.60 7.12 4.10 6.00 4.09 3.13 3.75 3.68 2.49 10.13 1.94

* Ultimate Load is 5 times the Working Load Limit. Rating based on standard tap size

Crosby General Info

Downloads

Crosby-catalogue-page-number-147.pdf

Crosby-catalogue-page-number-147.pdf

(approx. 0.2Mb)
Pricing (Buy/Quote)

You May Also Like

Crosby Eye & Eye Turnbuckles Certified for Lifting, Holding And Tensioning
Crosby 'HG226' Eye & Eye Turnbuckles Certified for Lifting Applications, WLL Range from 230kg to 34,000kg
Request Quote
Crosby Weldless Rings.
Crosby 'S643' Weldless Rings, WLL Range from 2540kg to 8620kg
Request Quote
Crosby Cold-Tuff Master Links. WLL Range from 15,900kg to 44,300kg
Crosby 'A342CT' Cold-Tuff Master Links, WLL Range from 15.9 tonnes to 44.3 tonnes
Request Quote
Crosby Standard & Heavy Duty Wire Rope Thimbles, Available in Galv or Stainless Steel
Crosby 'G411', 'G414' & 'SS414' Wire Rope Thimbles, Size Range from 3mm to 32mm Rope Dia.
Request Quote
Crosby A347 Welded Master Link Assembly. WLL Range from 2400kg to 67,000kg
Crosby 'A347' Welded Link Assembly, WLL Range from 2.4 tonnes to 67 tonnes
Request Quote
Crosby regular nut eye bolts with imperial thread from 1/4"-1-1/4". 290kg to 9520kg.
Crosby "G291" Regular Nut Eye Bolt
Request Quote
Contact Us About This Product

Recently Viewed Products

Manual operation grab for use with 11mm Kernmantle rope.

Ridgegear "RGA12" Guided Rope Grab Fall Arrester.

Was £135.59
Now £78.64
Adjustable single tine hook to convert a fork lift truck into a crane.

Camlok "TZH" Single Tine Forklift Fork Tine Mounted Hook - Range From 1500kg to 5000kg

From £428.84
Crosby UNC imperial thread (1/4

Crosby "G400" Imperial Eye Nut

Request Quote
Easy Assembly Industrial Quality Working Platform Height Options Range from 2.2m to 8.2m

Aluminium Scaffold Tower with Optional Platform Heights, Width and Depths

Request Quote

LiftingSafety uses cookies to improve your user experience.

Find out more