Search Results for "Protecta"- 81 items found
3m Protecta Harness Accessories
Accessories for Protecta Harnesses
Protecta "AL012" Twisted 3 Strand Polyamide Rope. White with Red ID Thread. Terminations, Plain Ends - 12mm Diameter x 20 Metre (Custom Lengths Available.)
Protecta Polyamide Rope with 12mm Diameter. Available in Custom Lengths from 20m or Reels of 200m.
Please note, this height safety rope is not supplied with any end fittings (bare ends, not ended). Purchased in quantities to suit the customers requirements (minimum order 20 metre)
Rope Specifications: Diameter: 12.5mm (without Tension)l; Made from Polyamide; Twisted (3 Strands); Colour: White; Identification Thread in Rope; Rope has a Yellow and Red Wear Indicator; Breaking Strength: >2900daN; Net Weight: 89 g/m
Protecta "AG560" Double Safety Manual Descender - Rope Diameter 9 to 12mm
Protecta Manual Rope Descender with Double Safety Blocking System.
Protecta AG560 Double Safety Manual Descender was designed to be used with ropes with a diameter of 9mm to 12mm. It is possible for the worker to control the speed of their descent by applying pressure to the handle. The descender is fitted with a double safety blocking.
Protecta "AT200/I20" Man-Riding Wire Rope Lifting and Rescue Winch - Wire Rope length 20 Metre
Protecta man-riding and rescue winch specifically designed for lifting people.
This unit is designed for the descent and ascent of a worker in a confined space. It has a built in fixing plate, so is simple to fit to any tripod or swivelling bracket. It has an anti-release safety system with an auto locking friction lining. Winch adaptable to PROTECTA tripod AM100 Anti-release safety system Reduction ratio: 4,5/1 Average speed: 10 cm per handle revolution Stainless steel 20 m with snap hook swivel.
Protecta "Pro Stretch" Elasticated Energy Absorbing Fall Arrest Lanyard. Karabiners, Scaffold Hooks and Snap Hooks - Range 1.5m 1.75m & 2 Metre
Protecta expending shock absorbing single leg fall arrest lanyard available from 1.5m to 2 metre with various end fittings
Protecta pro stretch energy absorbing lanyard gives energy absorption over entire length meaning a better balanced lanyard, with no bulky energy absorber to weigh down the user. The Lanyard is also elasticated over its length to retain the maximum desired length, but doesn’t trail on the ground or get in the way. Available in sizes 1.5m, 1.75m and 2m.
Protecta AM201 Removable Eye Bolt Anchorage Point Use With Pre Drilled Holes 20 - 22mm Diameter.
Protecta Manuclave Mobile Eye Bolt
This anchorage point is designed to be fitted into a pre-drilled hole on an existing steel structure to provide an anchorage point. It can then be removed after use and used elsewhere. Complies with standards: CE0086, EN795 Class B, 0082/037/160/09/96/0200.
Protecta "KJ5105S" Steel Screw Gate Karabiner - Opening 17mm
Protecta Double Action Karabiner with Screwgate, Breaking Strength 25kN
Protecta Stainless Steel Screw Twist Lock Karabiner - Opening 18mm
Protecta Double Action Self Locking Karabiner, Breaking Strength 22kN
Protecta "KJ5107" Steel Screw Gate Karabiner - Opening 25mm
Protecta Double Action Karabiner with Screwgate, Breaking Strength 50kN
Protecta "KJ5106" Steel Ladder Hook Connector - Opening 33mm
Protecta Double Action Connector with Twist Locj, Breaking Strength 45kN
Protecta "KJ5108" Steel Scaffold Hook Connector - Opening 50mm
Protecta Double Action Scaffold Hook with Twist Lock, Breaking Strength 30kN
Protecta "AJ527" Fixed Aluminium Scaffold Hook - Opening 60mm
Protecta Double Action Scaffold Hook, Breaking Strength 25kN
Protecta "Flexa" 2 Point Elastic Fall Arrest Harness with Rear and Front 'D' - S, M/L and XL
2 Point Elasticated Fall Arrest Harness.
Protecta "Flexa" 2 Point Elastic Fall Arrest Harness with Rear and Front 'D' Rings and Work Positioning Belt
2 Point Elasticated Fall Arrest Harness with Work Positioning Belt to EN361 & EN358.
Protecta Flexa 2 Point Elastic Harness has stretchable webbing which conforms to the shape of the user's body for extra comfort. Articulation rings provide the user with greater freedom of movement.This harness has elasticated webbing to give the worker the best possible fit, and also has an integrated work positioning belt. Can come with Standard, Tongue and Quick Connect buckles. Available in sizes S, M and L.
Protecta "Pro" Single Point Fall Arrest Harness with Rear 'D' Ring, Size: S to XL
"Pro" Fall Arrest Harness with Rear attachment point, adjustment on chest and legs, standard buckles.
The Protecta PRO II 1 Point Industrial Harness PRO harnesses have a ergonomically designed chassis for better fit and function Back D-ring. Pass thru leg straps for quick and easy donning. Lightweight hardware and connecting components reduce weight. Polyester web for superior abrasion resistance and durability. Supplied with CE certificate. Available in sizes S, M and L.
Protecta "Pro" Single Point Fall Arrest Harness with Rear 'D' Ring, Additional Shoulder Adjustment, Size: S to XL
"Pro" Fall Arrest Harness, Rear attachment point, adjustment shoulders, legs and chest, standard buckles.
Protecta "Pro" Fall Arrest Harness with Rear and Shoulder 'D' Rings, Size: S to XL
"Pro" Fall Arrest Harness Rear and shoulder attachment points, adjustment shoulders, legs and chest, standard buckles.
Protecta "Pro" 2 Point Fall Arrest Harness with Rear 'D' Ring and Front Webbing Loops, Size: S to XL
Front loops and rear attachment point, adjustment shoulders, legs and chest, standard buckles.
Protecta "Pro" 3 Point Fall Arrest Harness with Belt, Rear 'D' Ring, Size: S to XL
"Pro" Fall Arrest Harness, Rear attachment point and work positioning belt, adjustment shoulders, legs, waist and chest, standard buckles.
Protecta "Pro" 3 Point Fall Arrest Harness with Belt, Rear and 2 x Chest 'D' Rings, Size S to XL
"Pro" 3 Point Fall Arrest Harness, Rear and shoulder attachment point with positioning belt, adjustment shoulders, legs, waist and chest, standard buckles, Velcro label covers, fall indicator
Protecta "Pro" 4 Point Fall Arrest Harness with Rear and Front 'D' Ring & Additional 2 x Shouler 'D's', Size: S to XL
"Pro" Harness, Front, rear and shoulder attachment points, adjustment shoulders, legs and chest, standard buckles, Velcro label covers, fall indicator"
Protecta "Pro" 2 Point Fall Arrest Harness with Front and Rear 'D' Ring, Size: S to XL
"Pro" Harness Front and rear attachment point, adjustment shoulders, legs and chest, standard buckles.
Protecta "Pro 2" Fall Arrest Harness with Belt, Front and Rear 'D' Rings and Work Positioning Belt, Size: S to XL
Front and rear attachment point with positioning belt, adjustment shoulders, legs, waist and chest, standard buckles, Velcro label covers, fall indicator
Protecta Pro 2 Work Positioning Harness features - PRO harnesses have a ergonomically designed chassis for better fit and function Back D-ring Front vertical D-ring for climbing or rescue Pass thru leg straps for quick and easy donning Pass thru buckle body belt and side d-rings for added comfort and support when positioning. Built in impact indicators for easy inspection Lightweight hardware and connecting components reduce weight Spring loaded torso buckles for quick and easy adjustment Polyester web for superior abrasion resistance and durability Medium/Large sizing fits most; Small and Extra-Large sizes available Globally accepted standards including ANSI, OSHA, CSA and CE.
Protecta "Pro" Fall Arrest Harness with Belt, Front, Rear and Shoulder 'D' Rings, Size: S to XL
"Pro" Fall Arrest Harness Front, rear and shoulder attachment point with positioning belt, adjustment shoulders, legs, waist and chest, standard buckles.
Protecta Pro 2 Climbing Harness Features - PRO harnesses have a ergonomically designed chassis for better fit and function, Back D-ring, Front vertical D-ring for climbing or rescue, Two front chest d-rings for climbing, Pass thru leg straps for quick and easy donning, Pass thru buckle body belt and side d-rings for added comfort and support when positioning. Built in impact indicators for easy inspection, Lightweight hardware and connecting components reduce weight Spring loaded torso buckles for quick and easy adjustment, Polyester web for superior abrasion resistance and durability, Medium/Large sizing fits most; Small and Extra-Large sizes available, Globally accepted standards including ANSI, OSHA, CSA and CE
Protecta "Pro" Quick Connect 2 Point Fall Arrest Harness with Rear 'D' Ring and Front Webbing Loops, Size: S to XL
"Pro" Fall Arrets Harness, Front loops and rear attachment point, adjustment shoulders, legs and chest, quick connect buckles and pads
Protecta "Pro " Hi-Vis Vest 2 Point Fall Arrest Harness with Front and Rear 'D', Size: S to XL
"Pro" Fall Arrest Harness, High visibility yellow jacket, front and rear attachment points, adjustment shoulders, legs and chest, standard buckles.
Protecta "Rebel" Inertia Reel Personal Fall Limiter (PFL) with Polyester Webbing Lanyard With Snap Hook - Optional 3m or 6 Metre
3m and 6m Webbing retractable "self retracting lifeline" (SRL) Fall Arrestor Inertia Reel. Complies to EN360
The Rebel webbing inertia reel benefits from an excellent weight/ length ratio. On site, it provides exceptional safety and a high level of user comfort, due to its upper swivelconnection point and impact load indicator. The Rebel is one of the highest performance fall arresters on the market, ultra compact, extremely light, as solid as a rock and with the best weight to length ratio around. Compatible with any harness on the market. The Rebel has some amazing characteristics. Its 3m or 6m usage lengths permits work to be carried out over a large area. Its swivel connection point prevents the line from twisting. Finally, the extreme sensitivity of the lifeline reel, which puts an end to the unpleasant feeling of restraint. Overall, you have great freedom of movement, whilst remaining secured.
Protecta "AM100" Lightweight Aluminium Adjustable Rescue Tripod suitable for Fall Arrest & Manriding Applications
Adjustable tripod for working at height safely and rescue applications.
Features telescopic adjustable feet, automatic locking legs when opened, stabilizer pad on each foot, 4 high strength anchorage points, aluminium section design, cast head in high-strength Aluminium and 8 height setting points. Available with different options - No Retrieval Block, 15m Retrieval Block or 25m Retrieval Block. Also a choice of rescue winch options - No Rescue Winch or 20m Rescue winch. Available with a carry bag for the tripod.
Protecta "AD525" Self retracting Fall Arrest Retriever, Inertia Reel Rescue Block with Retrieveal Handle. Galv Cable Lanyard - 25 Metre
Self Retracting Fall Arrest Block with 25m Cable and Integrated Rescue Winch. Conforms to EN360 & EN1496
The Protecta AD525 retrieval fall arrest inertia reel has a built in hand winch that provides both a fall arrest solution and a rescue method should the worker have an accident or become ill while working. The AD525 inertia reel rescue block is made by protecta (Sala group) so will naturally be good quality, it is designed to arrest the fall then raise the casualty (not lower the casualty) and will fit on to the leg of the Protecta tripod. Particularly suited to confined space rescue. Please note that the winch element of this block is designed for rescue applications only and is only suited to raising a casualty, it must not be used for access or egress (suspended access work at height) / manriding applications cable, galvanised steel dia 5 mm, strength> 12 kN. internal absorbing element, integrated brake system, fullproof adjustment, double friction lining, impact force reduction < 6 kN.
Protecta "AL014" Twisted 3 Strand Polyamide Rope. White with Red ID Thread. Terminations, Plain Ends - 14mm Diameter x 20 Metre (Custom Lengths Available.)
Twisted 3 Strand Polyamide Rope with 14mm Diameter. (no end fittings) from 20 metre lengths.
This twisted 3 strand polyamide height safety rope is not supplied with any end fittings, but can be purchased in custom lengths with a minimum length of 20 metres.
Rope Specifications: Diameter: 14.5mm (without Tension); Made from Polyamide; Twisted (3 Strands); Colour: White; Identification Thread in Rope; Rope has a Yellow and Red Wear Indicator; Breaking Strength: >4000daN; Net Weight: 122 g/m
Protecta "AL0110T" White Static Braided Polyamide Rope (Black Wear Indicators) Terminations, Plain Ends - 11mm Diameter x 20 Metre (Or Custom Length)
White Static Braided Rope with 11mm Diameter (no end fittings) from 20 metre lengths.
This Braided Polyamide Rope is manufactured by Protecta, part of the Capital Safety Group. This height safety rope is not supplied with any end fittings (bare ends, not ended)
Purchased in quantities to suit the customers requirements (minimum order 20 metre)
Rope Specification: Diameter : 11 mm; Polyamide; Braided; Color : white; Identification thread; Black wear indicator; Breaking strength > 3200 daN; Net weight : 74,4 g/m.
Protecta "AL050" Tree Surgeons Trimming Rope. Terminations, Nylon Thimble Eye & Plain Ends - 13.5mm Diameter x 20m, 30m, 40m & 50 Metre
Tree Surgery Rope, in Lengths from 20m to 50m, with a 13.5mm Diameter.
This is also referred to as an "American" working rope, designed for use by tree surgeons, with one or two loops. Available in 20m, 30m, 40m and 50m lengths.
Protecta "AC2 Anchorage Line" 3 Strand Twisted Polamide Rope. Terminations, Karabiner & Plain End - 14mm Diameter x . 5, 10, 15, 20, 25, 30, 40 or 50 metre
Twisted 14mm Rope for use with Cobra Rope Grab Design. 5, 10, 15, 20, 25, 30, 40 or 50 metre lengths.
Five options of anchorage line offered for fall arrest and general height safety applications, at 5m, 10m, 15m, 20m, 25m, 30m, 40m or 50m. This is twisted Rope suitable for use with Protecta / Sala COBRA fall arrested etc.Rope Specifications: Polyamide rope; 14 mm diameter; Available in short lengths from 5 metre; 3 strand construction; Identification threads built into the rope; Yellow and red wear indicator also weaved into the rope;
Protecta "AC2 Anchorage Line" Braided Rope. Terminations, Karabiner & Plain End - 10.5mm Diameter x 5, 10, 15, 20, 30, 40, 50 & 60 Metre
10m to 60m Braided Rope Anchorage Line with 10.5mm Diameter and Screw Gate Karabiner.
Protecta AC4XX 10.5mm Braided Rope Anchorage Line with Screwgate Karabiner is designed for use with VIPER. With a multi-braid core for extra strength, and yellow and red wear indicator. Available in 10m, 20m, 30m, 40m, 50m, and 60m lengths.
Rope specification: Diameter: 10,5 mm (without tension); Polyamide; Multibraid core; Color : white; identification thread; yellow + red wear indicator; automatic snap hook: AJ565; system breaking strength > 2200 daN.
Protecta "AG563" Rope Ascent Handle - Rope Diameter 8 - 14mm
Right and Left Handled Rope Ascender for Climbing up a fixed rope.
Protecta AG563 Rope Ascent Handles are for use in conjunction with the foot loop to provide a means of safely climbing on a fixed rope. Compatible with ropes from 8 - 14mm diameter. Available as single left or right hand or both, also available is the foot loop.
Protecta "AG561" Sternal Ascension Blocker - Rope Diameter 8 - 12mm
Chest ascender for climbing a fixed rope, connects to chest harness.
Protecta AG561 Sternal Ascension Blocker is for ascending a fixed rope and for connecting to a chest harness. Compatible with ropes from 8 - 12mm.
Protecta "AG570" Single Sheave Pulley with Rotating Side Plates to Suit Synthetic to Maximum Diameter 16mm
Single Pulley with Movable Side Plates For Up To 16mm Rope.
Protecta AG570 Single Pulley with Moving Sides is a lightweight design single sheave pulley for the deflection of ropes up to 16mm diameter when used working at height.
Protecta "AG570/1" Single Sheave Height Safety Pulley with Moving / Rotating Aluminium Sides for Synthetic Ropes to Maximum Diameter 16mm
Single Pulley with Movable Aluminium Side Plates For 11mm Rope.
The side cheeks on this single sheave pulley swivel to make fitting the rope easy, a karabiner through the suspension eyes then captivate the rope making it safe to use. This is the budget choice pulley used to deflect the angle of an 11mm synthetic rope, often gaining mechanical advantage.
Protecta "AG360/I Trollmatic" Self Regulating Inclined Plane Evacuation Descender c/w "AG300" Chair - 60m or 100m
Inclined Plane Descender from 30 to 60 Degrees. Standard EN341.
This unit provides an evacuation solution for use on inclined planes (sloping cables) from 30° to 60° from the horizontal axis. The recommended Angle for use is 45°, which provides an escape or rescue route, whilst avoiding most obstacles, whether it be an oil derrick fire, a mountain rescue situation, or any other application where vertical descent is not a viable option. This System requires a load bearing system to be installed, and is to be used alongside an AG300 Evacuation Carriage. As this is designed as an installed system, although we can price individual components, we are not able to offer on-line pricing for the whole system. Please contact our sales team on 01977684600 or through our on-line contact form for a quote to your specification. System
Protecta "AG152 Bimatic" Steel Rope Descender for Successive Multiple Rescues - 5m - 100 Metre
Steel Wire Rope Auto Descender. Standard NF EN341 class C
With its alternative method of functioning, the Protecta Bimatic Descender allows the successive evacuation of multiple people from a hazardous area, without a loss of time. As one evacuee reaches the ground, another user can be connected to the opposite end of the rope, allowing continuous evacuation. Available in galvanised (general purpose) or stainless steel (marine use) rope cores and housing. Available in lengths of 5m to 100m. Alternating Direction Automatically regulated Descender Evacuation of heights from 5 to 100m, depending on cable length. With Galvanised or Stainless Steel Cable. Supplied with 2 Evacuation Straps. Speed of descent is controlled to 1.2m/s. Maximum load of 136kg. Weight of descender (no cable) is 3.6kg.
Protecta AG503 Rescue Evacuation Sling
Opening or Unopening Evacuation Strap.
Protecta AG503 Rescue Evacuation Sling is available as an opening and adjustable, or non-opening rescue sling, with a weight of 270g. Complies to EN standards EN 1498 class B.
Protecta "AG571" Single Polyamide Height Safety Pulley with "Fixed" Aluminium Side Plates for Synthetic Rope to Maximum Diameter 11mm
Single Aluminium Pulley with Fixed Sides for 11mm Rope.
This is a lightweight designed single sheave pulley used for the deflection of ropes up to 11mm diameter when working at height. A polyamide pulley with Aluminium side plates, with a breaking strength of >26kN.
Protecta "AG571/1" Single Sheave Polyamide Pulley with "Fixed" Aluminium Side Plates For Synthetic Rope to Maximum Diameter 20mm
Single Pulley with Fixed Sides with a maximum of a 20mm Rope.
Protecta AG571/1 Single Polyamide Pulley with Fixed Aluminium Side Plates is a lightweight design single sheave pulley for the deflection of ropes up to 20mm diameter when used working at height. This Polyamide pulley with aluminium side plates has a high breaking strength of >50kN.
Protecta "AG572" Vertically Stacked Double Sheave Polyamide Pulley with Moveable Aluminium Side Plates For 13mm Synthetic Rope to Maximum Diameter 13mm
Stacked Double Pulley with moveable plates.
Protecta AG572 Stacked Double Polyamide Pulley with Movable Aluminium Side Plates is a lightweight design sheave pulley for the deflection of ropes up to 13mm diameter when used working at height. Breaking strength >26kN.
Protecta "AG572/1" Twin Sheave Aluminium Pulley for Height Safety Applications with Swivel Side Plates for Synthetic Ropes to maximum Diameter 16mm
Double In-Line Pulley.
Protecta AG572/1 Aluminium Double In-line Pulley with Fixed Side Plates is a lightweight design single sheave pulley for the deflection of ropes up to 16mm diameter when used working at height. Made with aluminium pulley and side plates, has a breaking strength of >50kN.
Protecta "AG573" Single Aluminium Sheave Pulley c/w Integrated "Brake" Stainless Steel Rotating Side Plates for ropes Maximum Diameter 12mm
Single Pulley with Blocker
Protecta AG573 Aluminium Single Pulley with Stainless Steel Movable Side Plates and Brake is a lightweight design single sheave pulley with brake for the deflection of ropes up to 12mm diameter when used working at height. Aluminium made pulley and Stainless steel side plates giving a breaking strength of >30kN.
Protecta "AG573/1" Double Aluminium Sheave Pulley c/w Integrated "Brake" Stainless Steel Rotating Side Plates for ropes Maximum Diameter 12mm
Aluminium Double Pulley with Brake For 12mm Synthetic Rope.
Protecta AG573/1 Aluminium Double Pulley with Stainless Steel Movable Side Plates and Brake is a lightweight design double sheave pulley brake for the deflection of ropes up to 12mm in diameter when used working at height. Made with an Aluminium pulley and stainless steel side plates, giving breaking strength of >30kN.
Protecta "Pro" 2 Point Fall Arrest Harness with Belt with Rear 'D' Ring, Front Loops, Size: S to XL
"Pro" 2 Point Fall Arrest Harness with Front loops and rear attachment point with positioning belt, adjustment shoulders, legs and chest, quick connect buckles and pads.
Protecta Pro Fall Arrest Belt Harness features 1 dorsal attachment point, 2 sternal attachment loops and 2 positioning D rings on the belt.Cushioned thigh straps to improve comfort. Available in sizes S, M and L. 1 dorsal attachment point. 2 sternal attachment loops. 2 positioning D rings on the belt. Adjustable thigh and shoulder straps. Adjustable belt with a high comfort ergonomic back pad. Cushioned thigh straps. Quick fitting and closure by means of automatic fastenings. Rings to carry accessories. Dorsal piece with shock absorbing effect. Fall indicator. Weight: 2.60kg (small), 2.65kg (medium), 2.70kg (large) CE certified to EN361 and EN358.
Protecta "Pro Electric" Linesman Fall Arrest Harness with rear 'D' Ring & Front webbing Loops & Work Positioning Belt
Fall Arrest Harness with Work Positioning Belt, Fully Adjustable. Conforms to EN361 and EN358
Protecta Pro Electric Fall Arrest Harness Features include 1 x dorsal attachment 'D' ring with extension strap and 2 x front attachment loops / 2 x positioning 'D' rings on the belt. The adjustable positioning belt has 180° rotation and automatic fastening with adjustable padded thigh straps and shoulder straps. The 'D' ring for carrying accessories. Certified to EN361 and EN358. Available in sizes M or L.
Protecta "Rebel" SRL (Self Retracting Lifeline) with Galvanised or Stainless Cable and Swivel Snap Hook - 6m to 30m
Self-retracting fall arrest inertia reel block. Options for Aluminium or Thermoplastic Housing. Conforms to EN360.
Protecta "Pro" Fall Arrest Harness with Belt, Front and Rear Fall Arrest Attachment Points, Size: S to XL
"Pro" Fall Arrest Harness Front and rear fall arrest attachment points, a central and side work positioning points, adjustment shoulders, legs, waist and chest and with standard buckles.
Protecta Pro 2 Climbing Harness Features - PRO harnesses have a ergonomically designed chassis for better fit and function, Back D-ring, Front vertical D-ring for climbing or rescue, Two front chest d-rings for climbing, Pass thru leg straps for quick and easy donning, Pass thru buckle body belt and side d-rings for added comfort and support when positioning. Built in impact indicators for easy inspection, Lightweight hardware and connecting components reduce weight Spring loaded torso buckles for quick and easy adjustment, Polyester web for superior abrasion resistance and durability, Medium/Large sizing fits most; Small and Extra-Large sizes available, Globally accepted standards including ANSI, OSHA, CSA and CE
Protecta "Pro" Fall Arrest Harness with Belt, Front and Rear Attachment Point, Size: S to XL
"Pro" Fall Arrest Harness Front and rear attachment point with positioning belt, adjustment shoulders, legs, waist and chest, and quick connect buckles
Protecta Pro 2 Climbing Harness Features - PRO harnesses have a ergonomically designed chassis for better fit and function, Back D-ring, Front vertical D-ring for climbing or rescue, Two front chest d-rings for climbing, Pass thru leg straps for quick and easy donning, Pass thru buckle body belt and side d-rings for added comfort and support when positioning. Built in impact indicators for easy inspection, Lightweight hardware and connecting components reduce weight Spring loaded torso buckles for quick and easy adjustment, Polyester web for superior abrasion resistance and durability, Medium/Large sizing fits most; Small and Extra-Large sizes available, Globally accepted standards including ANSI, OSHA, CSA and CE
Protecta "Pro" Fall Arrest Harness with Belt, Front and Rear Fall Arrest Attachment Points, Size: S to XL
"Pro" Fall Arrest Harness Front and rear fall arrest attachment points, a central and side work positioning points, adjustment shoulders, legs, waist and chest and with standard buckles.
Protecta Pro 2 Climbing Harness Features - PRO harnesses have a ergonomically designed chassis for better fit and function, Back D-ring, Front vertical D-ring for climbing or rescue, Two front chest d-rings for climbing, Pass thru leg straps for quick and easy donning, Pass thru buckle body belt and side d-rings for added comfort and support when positioning. Built in impact indicators for easy inspection, Lightweight hardware and connecting components reduce weight Spring loaded torso buckles for quick and easy adjustment, Polyester web for superior abrasion resistance and durability, Medium/Large sizing fits most; Small and Extra-Large sizes available, Globally accepted standards including ANSI, OSHA, CSA and CE
Protecta "Pro" Rescue Harness, Front and Rear Attachment Point and Rescue Lifting Straps, Size: S to XL
"Pro" Rescue Harness, Front and rear attachment point and rescue lifting straps. Adjustment shoulders, legs and chest, standard buckles, Velcro label covers, fall indicator
Protecta "Pro " Single Point Hi-Vis Vest Harness with Rear 'D, Size: M/L to XL
"Pro" 1 Point Fall Arrest Harness, High visibility yellow jacket,, rear attachment points, adjustment shoulders, legs and chest, standard buckles.
Protecta "Pro" Welder Harness with Rear and Sternal 'D' Ring, Size: S to XL
"Pro" Welders Harness, Modacrylic Kevlar webbing. 5 Points of Adjustment. Pass Through Steel Buckles. Large Rear D Ring. Label Pouch. Torso Adjusters. Fall Indicators. 1 Dorsal, 1 sternal D ring
Protecta "Pro" Welder Harness with Rear and 2 x Sternal 'D' Ring, Size: S to XL
"Pro" Welders Harness, Modacrylic Kevlar webbing. 5 Points of Adjustment. Pass Through Steel Buckles. Large Rear D Ring. Label Pouch. Torso Adjusters. Fall Indicators. 1 Dorsal, 2 sternal D rings
Protecta "Rebel Retrieval" Self Retracting Fall Arrest Block with Built-in Rescue / Retrieval Winch Handle - 15 metre
Self-retracting lifeline (SRL) fall arrest inertia reel block with rescue function. Galvanised or stainless cable.
Protecta Manucroche Anchorage Device, Opening Options - 75mm to 140mm
Stainless Steel Fall Arrest System Anchor Clamp
Protecta "AG810" Fibre Rescue Stretcher
Polystyrene Fibre Rescue Stretcher.
SALA AG810 Fibre Rescue Stretcher is supplied with two shoulder straps and 3 injured party retaining straps. Also has 12 handles.
Protecta "Rebel" Inertia Reel Personal Fall Limiter (PFL) with Steel Cable Lanyard and Snap Hook Karabiner - 4.5 Metre
4.5m Galvanised Cable retractable "self retracting lifeline" (SRL) Fall Arrestor. Complies to EN360
Protecta AG500 Figure of 8 Manual Descender - Rope Diameter 9 to 14mm
Figure of Eight Manual Descender for Rescue and Evacuation.
Protecta AG500 Figure of 8 Manual Descender is a common type of friction brake, used in rescue and evacuation situations, which allow fast but controlled descent on a rope. Designed for use with ropes from 9mm to 14mm.
Protecta "AG562" Ascension Cam Clamp - Rope Diameter 8 - 12mm
Ascender Blocker for Climbing, Self Belaying and Cam for Rigging.
Protecta AG562 Ascension Cam Clamp for climbing a fixed rope belaying and rigging. Compatible with ropes from 8 - 12mm. Has a breaking strength of >20kN.
Protecta "AM210" Bolt-On Stainless Steel Anchorage Plate, 15kN Strength
Anchorage Plate.
The anchorage point for connection to a suitable and strong enough support structure to create a fall arrest anchorage point, restraint anchorage point or for performing a rescue of a casualty having fallen when working at height. This is a permanent anchorage point on a structure with minimum structure strength of 10kN.
Protecta "AM211" Stainless Steel D-Ring Fall Arrest Anchorage Point
EN795 D-Ring Anchorage Point, 15kN Strength.
Corrosion resistant made from stainless steel this is an anchorage eye made from stainless steel and is used for personal fall arrest systems (single person) or for restraint/rescue.
Protecta "AJ520" Black Double Action Screwgate Aluminium Karabiner. Breaking Strength: 23kN. Gate Opening 17mm
17mm Screw Gate Karabiner in Black Adonised Aluminium.
Screw locking Karabiner in black adonized aluminium alloy. With a 17mm opening. Complies with standards 0086 EN 362 0082/052/160/10/94/0105 1/08/95.
Protecta "AJ509" Stainless Steel Delta Quick Link. Breaking Strength 12kN. H 56mm, W 47mm. 6.5mm Thick - Gate Opening 7.5mm
7.5mm Delta Link.
Quick links enable a semi-permanent connection between different parts of a Height Safety Kit, such as between a harness and a lanyard, or a belt and a work positioning lanyard. Made from stainless steel with a breaking strength of >12kN and an opening of 7.5mm.
Protecta "AJ502" Stainless Steel Oval Quick Link. Breaking Strength 35kN. H 74mm x W 34mm x 8mm Thick - Gate Opening 11mm
11mm Quick Link.
Quick links enable a semi-permanent connector between different parts of a Fall Arrest System, such as between a harness and a lanyard, or a work positioning belt and a lanyard. Made from stainless steel giving a breaking strength of >35kN and an opening of 11mm.
Protecta "AJ508" Zinc Plated Steel Delta Quick Link. Breaking Strength 27kN. H 73mm x W 56mm x 8mm Thick - Gate Opening 10mm
10mm Delta Link.
Quick links enable a semi-permanent connection between different parts of a Height Safety Kit, such as between a harness and a lanyard, or a belt and a work positioning lanyard. Made from zinc plated steel giving a breaking strength of >27kN and an opening of 10mm.
Protecta "AJ507" Zinc Plated Steel Oval Quick Link. Breaking Strength 32.5kN. H 79mm x W 30mm x 7mm Thick - Gate Opening 17mm
17mm Quick Link. 500kg Working Load Limit
Quick links enable a semi-permanent connector between different parts of a Fall Arrest System, such as between a harness and a lanyard, or a work positioning belt and lanyard. Made from zinc plated steel with a breaking strength of >32.5kN and an opening of 16mm.
Protecta "AJ521" Black Double Action Twistlock Aluminium Karabiner. Breaking Strength: 20kN. Gate Opening 17mm
17mm Aluminium 1/4 Turn Self Locking Karabiner.
Twistlock Karabiner in black anodized aluminium alloy, with 1/4 turn self locking karabiner. Comes with 17mm gate opening.
Protecta "AJ531" Double Action Twistlock Aluminium Karabiner. Breaking Strength: 28kN. H 104mm x W 62mm x 11.5mm Thick. Gate Opening 17mm
17mm Aluminium 1/4 Turn Self Locking Karabiner.
Twistlock Karabiner in aluminium alloy, with a 1/4 turn self locking karabiner. Comes with a 17mm gate opening.
Protecta "AJ593" Double Action Galv Steel Self Locking Pear Shaped Scaffold Hook Karabiner. Breaking Strength 25kN. H 211mm x W 127mm - Gate 50mm
50mm Steel Pearshaped Hook.
Protecta AJ593 self locking 1/4 turn twistlock pear shaped karabiner is made from galvanised steel giving a breaking strength of >25kN and an opening of 50mm. This also comes with a pin.
Protecta "AJ592" Double Action Galv Steel Self Locking Karabiner. Breaking Strength 18kN. H 330mm x W 160mm x 24mm Eye - Gate 85mm
85mm Steel Hook Karabiner.
This is a double safety karabiner made with galvanised steel has a 1/4 turn self locking system. With a breaking strength of >18kN and an opening of 85mm.
Protecta "AJ595" Double Action Galvanised Steel Self Locking Scaffold Hook. Breaking Strength 23kN. H 216mm x W 111mm x 20mm Eye- Gate 50mm
50mm Galvanised Steel Scaffold Hook
This scaffold hook karabiner is a double safety self locking karabiner made from galvanised steel giving a breaking strength of >23kN and an opening of 50mm.
Protecta "AJ565" Double Action Snap Hook from Galv Steel. Breaking Strength 23kN. H 133mm, W 61mm. - Gate Opening 18mm
18mm Steel Snap Hook.
Protecta AJ565 18mm Self Locking Galvanised Steel Snap Hook has a breaking strength of >23kN with an opening of 18mm.
Protecta "AJ571" Double Action "Swivel" Snap Hook from Galv Steel. Breaking Strength 22kN. H 159mm, W 46mm. - Gate Opening 19mm
19mm Swivel Snap Hook.
Protecta AJ571 Swivelling Self Locking Galvanised Steel Snap Hook Karabiner has a double safety self locking system, has a breaking strength of >22kN with an opening of 19mm.
Protecta "AJ573" Double Action "Swivel" Snap Hook with "Fall Indicator" from Galv Steel. Breaking Strength 22kN. H 159mm, W 46mm. - Gate Opening 19mm
19mm Swivel Snap Hook.
Protecta AJ573 swivelling snap hook karabiner is a double safety self locking karabiner with a fall indicator. Made from galvanised steel it has a breaking strength of >22kN and an opening of 19mm.
SALA "Leading Edge" Mobile Fall Arrest Anchor System, Automatically Rotates. Tensioned with Ratchet Strap
Leading Edge Anchor tripod for Pre-Cast Concrete.
The first fall protection system designed for personnel who perform work on pre-cast concrete. Compact and Lightweight Design makes installation, use and removal quick and easy. A pair of these could also be used as anchors for a temporary horizontal lifeline. The roof anchor is designed for use by one person with a personal fall arrest system.
Sala Advanced UCT Aluminium Tripods, Height Options: 7ft or 10ft
Sala Aluminium Tripods with Adjustable Locking Legs, Safety Chain, Safety Shoes, Top Pulley and Quick Mount Bracket.
