Crosby IPPE10B(E) and IPPE10BNM Plate Clamps - Range from 3000kg to 12,000kg

• Available in capacities of 3 to 12 metric tons.
• Wide variety of jaw openings available: 0 to 180mm
• Welded alloy steel body for strength and smaller size.
• Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Maintenance and repair kits are available.
• Manufactured by an ISO 9001 facility.
• All sizes are RFID EQUIPPED.
• IPPE10BE: Economic version.
• IPPE10BNM: Non-marring.

Crosby IPPE10B(E)

The IPPE10 type clamp is suitable for lifting and transferring bundles of non-bendable sheets of metal in a horizontal position. The jaw opening can be easily adjusted for the height of the bundle or plate. The IPPE10 has magnets in the footplate. This allows one person to operate multiple clamps at the same time when lifting loads.

Crosby IPPE10BNM

The IPPE10BNM lifting clamps may be used for virtually all applications, where the objects that are to be lifted or transported require optimal protection against surface damage. This also applies to materials with a very smooth surface, composites, plates with a protective cover or hard surface plates. These clamps must be used in pairs.

Metric Dimensions & Specifications

* Design Factor based on EN 13155 and ASME B30.20.