Yale YLITP Push Travel Beam Trolley Hoist

The Yalelift ITP is a premium duty trolley-hoist combination with a manual push/pull travel trolley and Yalelift 360° hoist built-in, which aids the hoist in becoming a low-headroom hoist, because the hoist is directly mounted on to the trolley, rather than being hook suspended which would increase headroom.

YaleLift ITP Features

• Capacities available: 500kg, 1 tonne, 2 tonnes, 3 tonnes and 5 tonnes.
• 3 metre lift height supplied as standard.
• Corrosion resistant trolleys are available.
• Combination of a hoist on a beam trolley

More Information:

The combination of the Yalelift 360 with a low headroom manual trolley provides even more flexibility in the application of the Yalelift 360.

• All units of this series up to a capacity of 3000kg are provided with a single chain fall and the minimum headroom has been further reduced. Ideal for applications with low ceiling and limited headroom.
• The manual trolleys are adjustable to fit a wide range of beam profiles (e.g. INP, IPE, IPB). Depending on the beam flange width, an adjustment up to 300mm can be made easily.
• The trolley wheels are designed for a maximum beam profile incline of 14% (DIN 1025 - part 1), excellent rolling features are guaranteed by pre-lubricated, encapsulated ball bearings.
• Anti-tilt and anti-drop devices are standard.
• A subsequent conversion of a Yalelift 360 into a Yalelift IT with integrated trolley is easily possible at any time.
• Chain guide

The patented Yale brake system features low noise and reduced wear.

Height quality encapsulated ball bearings and sliding bushes for smooth and effortless operation

Optional Extras

• All models can be equipped with an overload prevention device
• Stainless steel load chain and hand chains

YL ITP Specifications

Corrosion resistance CR - Added lifetime

All models of the Yalelift Vario programme, can be supplied with corrosion resistant features which include zinc-plated load chains and stainless steel hand chain as standard. Corrosion starts on the surface of components due to reaction of environmental influences. This affects the mechanical properties of the components, e.g. breaking strength and total ultimate elongation.

Many components are supplied in black (unmachined), bright (machined) or painted condition. This offers certain protection but after only a short period of time corrosion can begin.

With the application of a protective coating, the development of corrosion can be reduced and delayed, thus extending the service life of the treated components.

Completely corrosion resistant units with either zinc-plated or stainless steel load chains should be used in all conditions with increased requirements towards corrosion protection.

Typical applications are in food processing (e.g. dairy, abattoir, etc.), chemical industries (e.g. paper, dye industries), farming and sewage treatment. Illustrated rubber buffers optionally available!

Spark resistant features: Added safety

All models of the Yalelift programme can be provided with the following optional features for additional protection against sparking:

• Load and hand chains from stainless steel
• Units completely corrosion resistant
• Bronze-plated suspension and load hooks
• Solid bronze trolley wheels
• Rubber buffers
• Chain containers

Overload protection: Added control

The overload protection device of the Yalelift Vario programme reliably prevents excessive load take-up of the hoist during operation. When reaching the pre-set overload value, the unit will jam and stop operation in the lifting direction. Lowering of the load is still possible at any time. The overload protection device provides additional safety with regard to possible false estimation of the load weight and thus increases the lifetime of the hoist. The new design principle allows excellent adjustability and response. Beam locking device Added security Yale trolleys can be optionally provided with beam locking device to secure the unloaded trolley in fixed position on the beam (park position e.g. on ships).

Chain container: Added comfort

The chain containers for the Yalelift Vario programme consist of a robust, powder-coated steel frame with a flexible chain bag made from high tensile Cordura textile fabric. Available in different sizes. Special sizes on request. Spark resistance In nearly all industrial areas, and not only in the chemical industry, plants are operated in explosion endangered environments. Because of the great damage an explosion could cause to people and material, stringent legal and technical requirements are imposed, particularly on electrical equipment used in explosion endangered environments. Applications Paint factories, paint shops, foundries, on-/ offshore, refineries, oil depots, electro-plating, automobile factories, on ships and docks, printers, textile and paper factories, food industries, glass and ceramic industries, wood working industries and hardening shops, etc.

Dimensional Specification

Dimensional Images

ITP 500kg to 3 tonne

ITP 5 tonne