-
Lifting Equipment
Lifting Equipment
- Chain Hoists
-
Wire Rope Hoists & Winches
- Hand Operated Wire Rope Winches and Hoists
- Cable Pullers / Hoists, Wire Rope Manual Operation
- Electric Winches and Hoists, AC (Mains Powered)
- Scaffold Hoists & Accessories
- Overhead Wire Rope Crane Hoists
- Hydraulic Wire Rope Winches & Hoists
- Pneumatic Wire Rope Air Winches / Hoists (Lifting and Pulling)
- Vehicle Mounted Winches
- Tractel Wire Rope & Accessories
-
General Lifting Equipment
- Fibre Lifting Slings
- Chain Slings & Components
- Lifting and Lashing Chain
- Wire Rope Slings & Assemblies
- Lifting Shackles
- Eye Bolts and Eye Nuts
- Lifting & Pulling Clamps
- Lifting Beams & Spreader Beams
- Precast Concrete Lifting
- Lifting Magnets, Permanent, Battery Electric and Manual
- Runway Beam Monorail Crane Trolleys, Push, Geared & Electric
- Equipment Identification Tags
-
Rigging Equipment
- Master Ring & Load Suspension Eyes
- Lifting & Rigging Hooks
- Turnbuckles & Rigging Screws
- Wire Rope Accessories and Fittings
- Snatch Blocks, Sheave Blocks and Crane Pulley Blocks
- Pulley Sheaves
- Lifting & Rigging Swivels - Eye, Hook & Shackle
- Load Restraint Equipment
- General Rigging Accessories
- Crosby Lifting & Rigging
-
Cranes & Gantry Systems
- Portable Davit Arms and Jib Cranes
- Swing Jib Cranes - Installed Floor & Wall Cranes
- Portable/Mobile Free-standing Swing Jib Cranes
- Aluminium Gantry Cranes
- Steel Gantry Cranes
- Fixed Steel Gantry Systems
- Shearlegs, Tripods & Quadpods
- Overhead Crane Systems
- Portable Shop-Floor/Workshop/Garage Cranes
- Counterbalance Floor, Workshop Cranes
- Scaffolding Runway Beam Systems
-
Material Handling & Jacking Equipment
- Machinery & Load Moving Skates
- Hydraulic Cylinders & Pumps
- Lifting Jacks
- Manhole Cover Lifters
- Hydraulic Pull Cylinders
- Hand Operated Pallet Trucks, Pump Trucks
- Stacker Trucks, Materials Lifts, Manual and Electric
- Genie and Counterbalance Materials Lifters
- Scissor Lift Tables
- Drum Handling Equipment
- Crane Forks
- Load Weighing Equipment - Load Cells
- Tool Spring Balancers / Load Balancers
- Platform Trucks & Trolleys
-
Forklift Truck Attachment
- Fork Mounted Man Riding Baskets
- Environment & Waste Handling Attachments
- Fork Lift Truck Mounted Drum Handling Attachments
- Fork Mounted Jib and Hook Attachments
- Fork Truck Booms & Tines
- Stainless Steel Forklift Attachments
- Forklift Truck Fork Extensions
- Multi Fork Attachments
- Fork Truck Scoop Attachments
- Big Bag Fork Truck Attachment
- Closed Base Coil Support Attachments
- Forklift Fork Protection Sleeves
- Snow Plough Fork Lift Truck Attachments
- Other Forklift Truck & Telehandler Attachments
- Specialist Lifting Equipment
- Access and Safety Related
- Workshop and Shop Floor
- Screwjacks & Actuators
-
Height Safety
Height Safety Equipment
-
Fall Arrest and Height Safety Harnesses
- General Use Harnesses EN361
- Work Positioning Harnesses EN361 & EN358
- Rope Access Harnesses
- Rescue Harnesses EN1497 & EN361
- Ladies & Childrens Harnesses
- Hi Vis Jacket/Vest Harnesses
- Welders Harnesses
- ATEX (Anti-Static) Harnesses
- Linesman Harnesses
- Oil Derrick Harnesses
- Sport Climbing Harnesses
- Tree Surgeon Positioning Harnesses
- Sit and Chest Harnesses. EN361 EN356 & EN831
- Work Positioning & Restraint Belts EN358
- Fall Arrest, Restraint and Positioning Lanyards
- Height Safety and Fall Arrest Kits
- Inertia Reels and Retrieval Blocks
- Man-riding Hoists & Rescue Winches
-
Fall Arrest & Man-riding Systems
- Fall Arrest Davit Arms & Posts for Working at Height
- Sala Advanced Davit Arm Systems and Components
- Xtirpa Confined Space Davit Arm Systems and Components
- Abtech Man-riding, Fall Arrest and Rescue Davits and Components
- Man-riding & Rescue Tripods & Quadpods
- Manriding Systems, Baskets and Chairs
- Mobile Fall Arrest Gantries, Systems & Steps
- Rope Guided Fall Arresters (Steel & Synthetic Rope)
- Temporary Horizontal Fall Arrest Lifelines
- Vertical Fall Arrest Systems Permanently Installed
- Horizontal Fall Arrest Systems Permanently Installed
- Manriding Baskets Fork Truck and Overhead Crane
- Tank Side Entry and Vehicle Fall Arrest Systems
- Suspension Seats / Bosuns Chair Working at Height
- Collective Fall Arrest Systems
- Man-Riding Sheave Blocks
- Anchorage Devices
- Karabiners & Connectors
- Rescue, Evacuation & Rope Access
-
General Height Safety Gear
- Height Safety Accessories
- Industrial & Climbing Height Safety Helmets
- Synthetic Height Safety Rope & Anchorage Lines
- Height safety Pulley Wheels For Synthetic & Steel Wire Rope
- Black Height Safety Equipment & PPE
- Hot Work Equipment. Cutting, Grinding & Welding
- Cases, Bags, Backpacks, Holdalls. Height Safety Gear
- Telescopic Extension Pole for Height Safety Applications
- Wind Energy Height Safety Equipment
- Stainless Steel Fall Arrest Equipment
-
Fall Arrest and Height Safety Harnesses
- Home
- About Us
-
Contact
Get In Touch
- Home/
- Fall Arrest & Height Safety Equipment/
- Fall Arrest Anchorage Devices/
- Fall Arrest Restraint & Rescue Eye Bolts EN795/
- Other Fall Arrest and Rescue Points/
- LiftingSafety Spring Loaded Temporary Eyebolt Anchor Points. EN795 Compliant
LiftingSafety Spring Loaded Temporary Eyebolt Anchor Points. EN795 Compliant
Quick and Easy to Install Anchorage Points - Options Available for Through Girder Flange, Concrete or Pre-Cast Sections.
GGE-2229
These Girder & Concrete Anchors are quick and easy portable anchorage solutions which can be used in the vertical and horizontal plane.
Simple to use, these anchors are operated by using two fingers to pull back the red collar. - this action retracts the retention bar, allowing the device to be inserted into the anchor hole. Once the device is in position, the red collar can be release, causing the retention bar to engage, fixing the device in position.
Suitable for use in any orientation, as long as the device is fitting in accordance with the manufacturers instructions, i.e. with as little ‘free play’ in the unit after installation. This can be achieved with a packing where the device is inserted into a thinner than optimal base material. Care should be taken to minimise shear forces on the device where possible, they are tested in shear, so are suitable for use in this way where unavoidable, but it is always useful to be mindful of reducing this.
Material: Steel Shaft, Plated Steel Eye, with Anodised Aluminium Collar
- Girder Grip Anchor: Designed to provide secure anchor points through steel structures, such as I beams.
- Medium Concrete Anchor: Designed to provide secure anchor points through formed concrete structures.
- Concrete Anchor: Designed to provide secure anchor points through hollow-cire concrete slabs.
Dimensions & Specifications
Size | Small | Medium | Large |
Type | Girder Grip Anchor | Medium Concrete Anchor | Concrete Anchor |
Max. Beam Depth | 43mm | - | - |
Max Material Thickness | - | 100mm | 330mm |
Eye Dia. | 35mm | 35mm | 35mm |
Overall Length | 220mm | 270mm | 510mm |
Hole Size (drilled) | 20-28mm | 20-28mm | 20-28mm |
MBS | 12kN (2697lbf) | 12kN (2697lbf) | 12kN (2697lbf) |
Weight | 0.6kg | 0.7kg | 1.2kg |
These Girder & Concrete Anchors are quick and easy portable anchorage solutions which can be used in the vertical and horizontal plane.
Simple to use, these anchors are operated by using two fingers to pull back the red collar. - this action retracts the retention bar, allowing the device to be inserted into the anchor hole. Once the device is in position, the red collar can be release, causing the retention bar to engage, fixing the device in position.
Suitable for use in any orientation, as long as the device is fitting in accordance with the manufacturers instructions, i.e. with as little ‘free play’ in the unit after installation. This can be achieved with a packing where the device is inserted into a thinner than optimal base material. Care should be taken to minimise shear forces on the device where possible, they are tested in shear, so are suitable for use in this way where unavoidable, but it is always useful to be mindful of reducing this.
Material: Steel Shaft, Plated Steel Eye, with Anodised Aluminium Collar
- Girder Grip Anchor: Designed to provide secure anchor points through steel structures, such as I beams.
- Medium Concrete Anchor: Designed to provide secure anchor points through formed concrete structures.
- Concrete Anchor: Designed to provide secure anchor points through hollow-cire concrete slabs.
Dimensions & Specifications
Size | Small | Medium | Large |
Type | Girder Grip Anchor | Medium Concrete Anchor | Concrete Anchor |
Max. Beam Depth | 43mm | - | - |
Max Material Thickness | - | 100mm | 330mm |
Eye Dia. | 35mm | 35mm | 35mm |
Overall Length | 220mm | 270mm | 510mm |
Hole Size (drilled) | 20-28mm | 20-28mm | 20-28mm |
MBS | 12kN (2697lbf) | 12kN (2697lbf) | 12kN (2697lbf) |
Weight | 0.6kg | 0.7kg | 1.2kg |
Products of Possible Interest
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.