Crosby Lifting Eyes

Crosby Regular Nut Eye Bolts. Our Crosby G291 Regular Nut long shank Eye Bolts are supplied forged Steel - Quenched and Tempered with fatigue rated at 1.5 times the Working Load Limit (WLL) at 20,000 cycle; All These G291 eye Bolts are Hot Dip galvanized after threading (UNC). They are supplied with standard Hot Dip galvanized hex nuts and are recommended for in line pull.

Crosby Shoulder Nut Eye Bolts. Crosby G277 Shoulder Nut Eye Bolts are made from forged Steel and are quenched and tempered, they are also fatigue rated at 1.5 times the Working Load Limit (rated at 20,000 cycles) and the WLL shown her is for in line pull (not at an angle). All G277's are galvanized after threading (UNC) and are supplied with galvanised nuts

Crosby Screw Eye Bolts. The Crosby G275 Screw threaded Eyebolts are made from forged Steel and are quenched and Tempered / hot dip galvanised.

Crosby metric M-279 and Imperial Thread S-279 UNC Shoulder Type Machinery Eye Bolts. We offer the range of Crosby S279 UNC thread  and metric thread Shoulder Type Machinery Eyebolts that are made from forged Steel (Quenched and Tempered) Working Load Limits shown are for in-line pull (Not pulled at an angle) and range from 200kg to 8500kg (650lbs to 24000lbs). These eye bolts are fatigue rated at 1.5 times the Working Load Limit (WLL) at twenty thousand cycles. Recommended for in-line pull.

Crosby Rivet Eye Bolts.

The range of Crosby S293 Rivet Eye Bolts are made from forged steel that is quenched and tempered. There are 9 options to choose from with different shaft diameters and lengths.

Remember: these are not threaded!

Crosby weld on pad eyes / lifting eyes.

The Crosby S264 Pad Eye is forged Steel, Quenched and Tempered and can be used to lift loads in the vertical plain. Approximate lifting capacities are from 650lbs (295kg) to 7200lbs (3265kg). They are forged from 1035 Carbon Steel and have excellent welding qualities.

Crosby Pad Eyes are lifting eye bolts for welding on to a suitable support structure to create a certified lifting point, they are designed to be attached to any structure, equipment, vehicles or machinery in which there is a need or desire for an eye, without the drilling and/or threading required for an threaded shank eyebolt.

Crosby Eye Nuts. The Crosby G400 Eye Nuts are made from forged Steel - Quenched and Tempered and are also hot Dip galvanized. Tapped with standard UNC class 2 threads after galvanizing though they are also available in blank (as forged) item (S-4028) or, on request, with metric threading (M-4028)

Crosby Unthreaded Forged, Quenched and Tempered Steel Lifting Eyes.

The range of Crosby S405 Eye Bolts are supplied Un-threaded; they are made from forged Steel that is quenched and Tempered. There are 9 options to choose from with different shaft diameters and length's that when threaded can achieve SWL's from 390kg to 8160kg,

Remember: these are not supplied threaded!

Crosby Weld-On Pivot Link. The Crosby S265 is a Weld-On Pivot Link lifting eye / lasing point. There are 5 options with different sizes and capacities from 1 tonne for 15 tonnes. These pivoting links are commonly used for both lifting and load restraint applications (cargo restraint and for mobile plant) and are made from forged Steel that is quenched and tempered.

Shoulder Rivet Eye Bolts.

The range of Crosby S276 Shouldered Rivet Eye Bolts are made from forged steel that is quenched and tempered. There are 18 options to choose from with different shaft diameters and lengths.

Remember: these are not threaded!

Nut Ring Bolts.

The Crosby G-257 Shoulder Nut Ring Bolts are forged eyebolt that is manufactured from forged steel and are quenched and tempered. They are Hot Dip galvanized (Bolt, Nut and ring) and UNC threaded after galvanising.

The Diameter of ring stock is same as shank diameter and the ring eyebolts are supplied in two safe working loads, 450kg (1200lbs) and 1000kg (2200lbs).