Crosby Eye Hooks

Crosby Eye Hoist Hooks. Available as either Carbon self-colour, Carbon Galvanised or Alloy.

Crosby 320 Eye Hoist Hooks from 750kg to 60 tonnes SWL are available in carbon steel and alloy steel. They have a 5:1 Design Factor and are load rated. Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk. Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch.

Subsea Flourescent Eye Hooks. The range of Crosby ROV Sub-sea Fluorescent Eye Hooks are designed specifically for use in offshore installations and marine applications. They have the hook identification code stamped on each hook, all quenched and tempered and are fitted with the Crosby QUIC-CHECK® angle indicators forged into the top eye and deformation and angle indicators forged on the hook. They also have a fluorescent yellow finish for high "sub-sea" visibility.

Crosby L562A ROV shank hook with a long hexagonal body for easy of manipulation by ROV devices. The Crosby L562A ROV shank hooks have a hook identification code stamped on each hook. They are quenched and tempered with QUIC-CHECK® angle indicators forged into the top eye and deformation and angle indicators forged on hook. Coloured fluorescent yellow for high visibility subsea they also possess a high cycle, long life spring. Pad eyes are provided on either side of hook as cable guides.

 

Crosby SHUR-LOC S1316 Eye Hooks. The Crosby SHUR-LOC S1316 Eye Hooks from 1450kg to 27.1 tonnes are forged Alloy Steel, Quenched and Tempered. Lock Latch is self-locking when hook is loaded. The SHUR-LOC hook, if properly installed and locked, can be used for personnel lifting applications. They are individually proof tested to 2-1/2 times the Work Load Limit with certification and are fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. Suitable for use with Grade 100 and Grade 80 chain.

Crosby Forged Alloy Steel, Quenched and Tempered Snap Hooks.

Crosby G3315 Snap Hooks are forged alloy steel and are quenched and tempered. These hooks have pressed steel latches and stainless steel springs, bolts and nuts. For replacement latch kit, order Stock No. 9900299.

Crosby 1210 Round Reverse Eye Hoisting Hooks.

All Crosby 1210 Round Reverse Eye Hoisting Hooks are made from forged carbon steel - galvanized.

Crosby S377 Barrel Hoist Hooks.

Crosby S377 Barrel Hoist Hooks are forged carbon steel and are quenched and tempered. The S377 meets the performance requirements of Federal Specification RR-C-271D, Type V, Class 6, except for those provisions required of the contractor. 

Available in the following sizes: 1t per pair.

Crosby A378 Sorting Hook for hoisting optional with handle or with no handle. All of the Crosby A378 Sorting Hook for hoisting are forged alloy steel and as standard they are all quenched and tempered; the deep straight throat permits efficient handling of flat plates or large cylindrical shapes.