The innovative new range of ToughLift® manual material lifts sets new standards in ease-of-use and equipment durability.
The ToughLift® ML series of materials lifters are specifically designed and specified to be low maintenance and have a low whole life cost.
It is quick and simple to set up and its very strong, compact chassis fits through a standard single doorway.
Key Features
The innovative new range of ToughLift® Material Lifts include the following features as standard:
Heavy-duty construction.
Quick and simple setup; no tools required.
Portable compact design for easy transport and storage.
Anodised lightweight aluminium telescoping mast:
Corrosion resistant, as the anodic film is totally impermeable.
Abrasion resistant.
Anodised aluminium components are 100% recyclable.
Mast safety braking system holds the carriage and lifting column(s) in position if the cable becomes loose or breaks.
Extra wide aluminium first pulley wheel improves the laying of the cable on the winch drum.
Heavy-duty castors with non-marking tyres.
Braked swivel castors with foot-operated brake on the side and bolted foot operated straight-line lock to aid loading for transport or moving in a straight line on site.
Long loading wheels/handles shaft so that the mast is horizontal when the machine is laid back for transport.
Loading wheels with sealed bearings rotate with ease.
Transport wheels with sealed bearings.
Tube welded through the Standard Forks and Boom to prevent the drop nose pin jamming when fitting to the carriage.
E-coated and then powder coated steel fabrications fitted with silicone rubber end caps.
Colour coded decals use 3M high adhesive strength outdoor rated film and inks, and can be jet washed clean on a moderate pressure.
Manufacturers plates with serial numbers riveted to the chassis of the machine and fitted to the load handling attachments to aid traceability for LOLER thorough examinations (UK only, regulations in other countries vary).
Stainless-steel roller guards.
Stainless-steel retaining pins.
Robust pull rings on front legs and handles/loading wheels retaining pins.
Bushed joints across the machine.
Stainless-steel fixings.
Easy to wind dual handled manual winch with brake to hold the load in place.
Winch handles with ergonomic grip design.
Standard Forks can be fitted up or down in the carriage on the mast.
All machines and load handling attachments are supplied with both EU and UKCA Declarations of Conformity.
Hard wearing aluminium mast pulley wheels.
Cable guard with operational and safety decal.
Carriage lock operates in all machine configurations.
Hoisting and winching anchor.
Robust waterproof document holder.
Spirit level to aid the operator to level the chassis.
Specifications and Performance
Model
ML-10
ML-15
ML-20
ML-25
LOAD CAPACITY, WEIGHT, & OPERATING ANGLE
Load capacity
Please refer to the table below for the load capacities at different load centres.
Machine weight (1)
129kg
153kg
190kg
214kg
Maximum allowable chassis inclination
0°
0°
0°
0°
DIMENSIONS - Working Heights
With Standard Forks down
2.97m
4.46m
5.94m
7.42m
With Standard Forks up
3.49m
4.98m
6.46m
7.94m
With Load Platform forks down (2)
2.97m
4.46m
5.94m
7.42m
With Load Platform forks up (2)
3.49m
4.98m
6.46m
7.94m
With Boom (3)
3.28m
4.76m
6.25m
7.42m
Other Dimensions
Width with stabilisers deployed
N/A
N/A
1.84m
1.84m
Length with front legs deployed
1.51m
1.88m
2.06m
2.06m
Stowed width
0.81m
0.81m
0.81m
0.81m
Stowed length
0.76m
0.76m
0.76m
0.81m
Stowed height
2.02m
2.02m
2.02m
2.02m
Ground clearance
52mm
52mm
52mm
52mm
AVERAGE TURNS OF WINCH PER METRE
Carriage moving
42/m
42/m
42/m
42/m
Mast moving
19/m
19/m
19/m
19/m
NOISE EMISSIONS
<70dBA
(1) - Excluding load handling attachments. (2) - With Standard Forks only. (3) - Measurement from the ground to the bottom of the lifting shackle.
Load Capacities
Load Centre
Model
46cm
51cm
56cm
61cm
66cm
71cm
76cm
81cm
86cm
91cm
97cm
102cm
107cm
ML-10
454kg
454kg
454kg
454kg
414kg
374kg
335kg
295kg
272kg
249kg
227kg
204kg
181kg
ML-15
363kg
363kg
363kg
363kg
346kg
329kg
312kg
295kg
281kg
268kg
254kg
240kg
227kg
ML-20
363kg
332kg
303kg
272kg
255kg
238kg
221kg
204kg
195kg
186kg
177kg
168kg
159kg
ML-25
295kg
264kg
235kg
204kg
193kg
181kg
170kg
159kg
150kg
141kg
132kg
122kg
113kg
Accessory Weights and Dimensions
Length
Width
Depth
Weight
Standard Forks (4)
69.3cm
58.4cm
6.45cm
18kg
Pipe Cradle
57.5cm (each)
6.9cm (each)
14.5cm (each)
4kg (set)
Load Platform (4)
70cm
58.5cm
8.5cm
15kg
Extension Forks (5)
76.2cm (each)
5cm (each)
7.5cm (each)
4kg (set)
Boom (4)
115.8cm
18cm
37.2cm
18kg
Rough Terrain Wheel Kit
54.8cm
73cm
24.6cm
8.3kg
Stabilisers
86.6cm (each)
5.1cm (each)
58cm (each)
6.3kg (each)
(4) - Length is measured from the front of the carriage to the end of the load handling attachment.
(5) - Adds 16.1cm, 39.9cm, or 63.1cm to the length of the Standard Forks.
The innovative new range of ToughLift® manual material lifts sets new standards in ease-of-use and equipment durability.
The ToughLift® ML series of materials lifters are specifically designed and specified to be low maintenance and have a low whole life cost.
It is quick and simple to set up and its very strong, compact chassis fits through a standard single doorway.
Key Features
The innovative new range of ToughLift® Material Lifts include the following features as standard:
Heavy-duty construction.
Quick and simple setup; no tools required.
Portable compact design for easy transport and storage.
Anodised lightweight aluminium telescoping mast:
Corrosion resistant, as the anodic film is totally impermeable.
Abrasion resistant.
Anodised aluminium components are 100% recyclable.
Mast safety braking system holds the carriage and lifting column(s) in position if the cable becomes loose or breaks.
Extra wide aluminium first pulley wheel improves the laying of the cable on the winch drum.
Heavy-duty castors with non-marking tyres.
Braked swivel castors with foot-operated brake on the side and bolted foot operated straight-line lock to aid loading for transport or moving in a straight line on site.
Long loading wheels/handles shaft so that the mast is horizontal when the machine is laid back for transport.
Loading wheels with sealed bearings rotate with ease.
Transport wheels with sealed bearings.
Tube welded through the Standard Forks and Boom to prevent the drop nose pin jamming when fitting to the carriage.
E-coated and then powder coated steel fabrications fitted with silicone rubber end caps.
Colour coded decals use 3M high adhesive strength outdoor rated film and inks, and can be jet washed clean on a moderate pressure.
Manufacturers plates with serial numbers riveted to the chassis of the machine and fitted to the load handling attachments to aid traceability for LOLER thorough examinations (UK only, regulations in other countries vary).
Stainless-steel roller guards.
Stainless-steel retaining pins.
Robust pull rings on front legs and handles/loading wheels retaining pins.
Bushed joints across the machine.
Stainless-steel fixings.
Easy to wind dual handled manual winch with brake to hold the load in place.
Winch handles with ergonomic grip design.
Standard Forks can be fitted up or down in the carriage on the mast.
All machines and load handling attachments are supplied with both EU and UKCA Declarations of Conformity.
Hard wearing aluminium mast pulley wheels.
Cable guard with operational and safety decal.
Carriage lock operates in all machine configurations.
Hoisting and winching anchor.
Robust waterproof document holder.
Spirit level to aid the operator to level the chassis.
Specifications and Performance
Model
ML-10
ML-15
ML-20
ML-25
LOAD CAPACITY, WEIGHT, & OPERATING ANGLE
Load capacity
Please refer to the table below for the load capacities at different load centres.
Machine weight (1)
129kg
153kg
190kg
214kg
Maximum allowable chassis inclination
0°
0°
0°
0°
DIMENSIONS - Working Heights
With Standard Forks down
2.97m
4.46m
5.94m
7.42m
With Standard Forks up
3.49m
4.98m
6.46m
7.94m
With Load Platform forks down (2)
2.97m
4.46m
5.94m
7.42m
With Load Platform forks up (2)
3.49m
4.98m
6.46m
7.94m
With Boom (3)
3.28m
4.76m
6.25m
7.42m
Other Dimensions
Width with stabilisers deployed
N/A
N/A
1.84m
1.84m
Length with front legs deployed
1.51m
1.88m
2.06m
2.06m
Stowed width
0.81m
0.81m
0.81m
0.81m
Stowed length
0.76m
0.76m
0.76m
0.81m
Stowed height
2.02m
2.02m
2.02m
2.02m
Ground clearance
52mm
52mm
52mm
52mm
AVERAGE TURNS OF WINCH PER METRE
Carriage moving
42/m
42/m
42/m
42/m
Mast moving
19/m
19/m
19/m
19/m
NOISE EMISSIONS
<70dBA
(1) - Excluding load handling attachments. (2) - With Standard Forks only. (3) - Measurement from the ground to the bottom of the lifting shackle.
Load Capacities
Load Centre
Model
46cm
51cm
56cm
61cm
66cm
71cm
76cm
81cm
86cm
91cm
97cm
102cm
107cm
ML-10
454kg
454kg
454kg
454kg
414kg
374kg
335kg
295kg
272kg
249kg
227kg
204kg
181kg
ML-15
363kg
363kg
363kg
363kg
346kg
329kg
312kg
295kg
281kg
268kg
254kg
240kg
227kg
ML-20
363kg
332kg
303kg
272kg
255kg
238kg
221kg
204kg
195kg
186kg
177kg
168kg
159kg
ML-25
295kg
264kg
235kg
204kg
193kg
181kg
170kg
159kg
150kg
141kg
132kg
122kg
113kg
Accessory Weights and Dimensions
Length
Width
Depth
Weight
Standard Forks (4)
69.3cm
58.4cm
6.45cm
18kg
Pipe Cradle
57.5cm (each)
6.9cm (each)
14.5cm (each)
4kg (set)
Load Platform (4)
70cm
58.5cm
8.5cm
15kg
Extension Forks (5)
76.2cm (each)
5cm (each)
7.5cm (each)
4kg (set)
Boom (4)
115.8cm
18cm
37.2cm
18kg
Rough Terrain Wheel Kit
54.8cm
73cm
24.6cm
8.3kg
Stabilisers
86.6cm (each)
5.1cm (each)
58cm (each)
6.3kg (each)
(4) - Length is measured from the front of the carriage to the end of the load handling attachment.
(5) - Adds 16.1cm, 39.9cm, or 63.1cm to the length of the Standard Forks.
