- Home/
- Lifting Equipment/
- Forklift Truck Attachments /
- Forklift Truck Fork Extensions/
- "Radius" (Round Top) Fork Lift Truck Tine Extensions with "Open Base" - Range from 1200mm to 1500mm
"Radius" (Round Top) Fork Lift Truck Tine Extensions with "Open Base" - Range from 1200mm to 1500mm
Radiused Fork Extensions to Protect Against Damage caused By Square Edges On Standard Tines.
RFE-621
Manufactured to conform to ISO 13284 British Standard, these radius topped fork sleeves slide over the forklift tines to increase the load bearing area. Rolled products such as small steel coils, coils of wire, plastic etc can be handled without the fork edges causing damage to the product.
The radius top fork sleeves are manufactured from heavy duty 8mm thick steel with additional 5mm thick internal strengthening plates and a profiled toe with end cap for added strength.
Fixed retaining bars (removable pin is used instead when sleeve length is greater than 2000mm) safely secures the fork sleeves to the truck forks.
- Radiused top to increase load bearing area whilst preventing sharp fork edges from causing damage to the inner core of the rolled product being handled.
- Profiled toe with profiled end cap.
- 'CE' marked
Specifications
| Part N° | To suit forks width (mm) | Sleeve Length (mm) | Max Fork Section (mm) | Minimum Fork Length (mm) | Weight (kg) |
|---|---|---|---|---|---|
| 621-T12468 | 100mm wide | 1200 | 100 x 50 | 900 | 60 |
| 621-T12469 | 100mm wide | 1500 | 100 x 50 | 1200 | 70 |
| 621-T12470 | 125mm wide | 1200 | 125 x 50 | 900 | 66 |
| 621-T12471 | 125mm wide | 1500 | 125 x 50 | 1200 | 80 |
| 621-T12472 | 150mm wide | 1200 | 150 x 60 | 900 | 82 |
| 621-T12473 | 150mm wide | 1500 | 150 x 60 | 1200 | 100 |
Manufactured to conform to ISO 13284 British Standard, these radius topped fork sleeves slide over the forklift tines to increase the load bearing area. Rolled products such as small steel coils, coils of wire, plastic etc can be handled without the fork edges causing damage to the product.
The radius top fork sleeves are manufactured from heavy duty 8mm thick steel with additional 5mm thick internal strengthening plates and a profiled toe with end cap for added strength.
Fixed retaining bars (removable pin is used instead when sleeve length is greater than 2000mm) safely secures the fork sleeves to the truck forks.
- Radiused top to increase load bearing area whilst preventing sharp fork edges from causing damage to the inner core of the rolled product being handled.
- Profiled toe with profiled end cap.
- 'CE' marked
Specifications
| Part N° | To suit forks width (mm) | Sleeve Length (mm) | Max Fork Section (mm) | Minimum Fork Length (mm) | Weight (kg) |
|---|---|---|---|---|---|
| 621-T12468 | 100mm wide | 1200 | 100 x 50 | 900 | 60 |
| 621-T12469 | 100mm wide | 1500 | 100 x 50 | 1200 | 70 |
| 621-T12470 | 125mm wide | 1200 | 125 x 50 | 900 | 66 |
| 621-T12471 | 125mm wide | 1500 | 125 x 50 | 1200 | 80 |
| 621-T12472 | 150mm wide | 1200 | 150 x 60 | 900 | 82 |
| 621-T12473 | 150mm wide | 1500 | 150 x 60 | 1200 | 100 |
Products of Possible Interest
Contact Us About This Product
If you wish to receive a quote for this product, please use the 'Pricing' tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Buy/Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommend as we will be able to suit your needs much more efficiently.
Share this page!
Save this QR code
for use on Smart Phones
