Tractel HT46BA Harness is derived from the HT44 to which three automatic buckles have been integrated to facilitate fitting by a quick-closure system and an easy-to-adjust design. It has 1 back anchorage point 1 sternal anchorage and 2 chest anchorage. Very comfortable to use over extended work periods, thanks to its harness-type leg straps. There's possibility for using a restraining lanyard when in the work position, connected to two chest fastening points, also possibility for using a fall arrest connected to sternal anchorage. Available in sizes S, M and XL.
The TIRAK with its compact frame is lighter, smaller and more economic than a crane or a drum winch with the same capacity and complete with a similar length of wire rope. Features include: Terminal switch for limiting the height of lift wherever desired, emergency lowering in power failure at a controlled speed, electrical system suitable for use on building sites, easy to operate push button pendant control and heavier loads can be handled using winch with snatch blocks. Full safety features including limit switches and release/lower facility.
Topal Industries PBM Single Beam Spreader.
The Carol rescue winch satisfies all rupture and endurance test requirements as per standard EN13157.It is designed for use with the Tractel Tracpode Tripod. The optional 5mm cable is available in 20m or 30m lengths. The carol winch can be used for work in suspension, if a second safety fall arrest is used. Tractel Carol Rescue Winch Datasheet. A Variable-length control crank handle (6 adjustment positions) allows the user to either apply maximum control force, or perform rapid cranking for small loads or rewinding. The Self-locking crank handle adjustment knob offers maximum user comfort and safety and allows for the adjusting of the crank handle or removal of it to prevent operation of the winch.
Tractel work positioning belt is not designed to be used as a fall arrest device. Has 2 Stainless steel D rings for side anchorage, is adjustable with quick opening, and is lightweight and rot-proof. Can be combined with any tractel harness using belt loops making a fully integrated belt-harness assembly. Available in 3 sizes - Small, Medium and Extra large.
This hitching clamp is equipped with an anchoring ring, with a compact and strong construction; this can also be quickly and easily adjusted with its removable handle. It's adjustable from 75mm to 235mm.
The Tirfor® Principle - A Tirfor® has neither wheels nor gears. Two jaws alternately pull the wire rope and the load in the required direction, just like pulling on a rope with both hands. The jaws are self clamping, proving immediate and gradual safety. The heavier the load , the tighter they clamp. A release mechanism allows the wire rope to be inserted between the jaws.
Features: Constant control of the load during lifting and lowering with accuracy to within one millimetre, when stationary the load is automatically distributed between the two jaw units, overload safety device, TU range approved for lifting personnel in most countries.
LiftingSafety uses cookies to improve your user experience, To accept this, please click the 'accept' button below.