- Home/
- Fall Arrest & Height Safety Equipment/
- Fall Arrest Anchorage Devices/
- Roof Top / Dead Weight Fall Arrest Anchor to EN795/
- Tractel EN795 Roof Top / Dead-weight Anchorage Points/
- Tractel "Mobifor" Mobile Deadweight Fall Arrest Anchorage System, to EN 795 E /2012.

Tractel "Mobifor" Mobile Deadweight Fall Arrest Anchorage System, to EN 795 E /2012.
Mobifor dead weight mobile anchor point system - a fast, reliable solution for setting up a temporary or permanent anchor on terrace roofs.
Mobifor / TMDF-4169



The mobifor™ is a deadweight anchoring system, for installation on flat roofs and fall risk areas. The set consists of 24, steel-reinforced, concrete blocks, positioned on four steel arms. The arms are connected at the centre by a joining plate equipped with a rotary anchor point with an energy dissipater.
The mobifor is a fast, reliable solution for setting up a temporary or permanent anchor on flat roofs and other areas where there is a risk of falling. The mobifor™ can be installed on concrete, EPDM and PVC with a maximum inclination of up to 5 degrees.
By eliminating the need to drill the structure or to use any tools, this anchor point represents an easy-to-use safety element which can be implemented in places where traditional anchoring systems are impossible to install. By the miniaturised, ergonomic design of the weights, the user can access the terrace roofs without the need for specific lifting equipment to install the anchor point.
Specification
- 4 arms made of galvanised steel.
- 24 concrete weights.
- Rotary anchor point.
- Conforms to standard EN 795 E /2012.
No Tools Required
- The connecting plate is set up with no need to drill holes in the roof.
- The arms click easily into the plate.
- Weights automatically interlock.
Easy set up
- Takes less than 5 minutes to set up.
- The system uses ergonomic weights with large handles.
- Overall weight is distributed across 24 separate weights making it easy to lift and carry.
- The weights are easy to install on the arms.
Enhanced fall protection
- 360 degree movement possible thanks to the rotary anchor point.
- Compatible with a variety of fall arrest devices.
Extremely versatile
- Adapts to all horizontal roofs meeting European requirements.
- Its weight and volume allows for installation in places where traditional anchoring systems cannot be installed.
- Can be placed on a slope with an inclination of up to 5 degrees.
- Can be installed without penetrating the roof surface.
- Can be installed on the following roof surfaces: EPDM, bitumen, PVC.
The mobifor™ is a deadweight anchoring system, for installation on flat roofs and fall risk areas. The set consists of 24, steel-reinforced, concrete blocks, positioned on four steel arms. The arms are connected at the centre by a joining plate equipped with a rotary anchor point with an energy dissipater.
The mobifor is a fast, reliable solution for setting up a temporary or permanent anchor on flat roofs and other areas where there is a risk of falling. The mobifor™ can be installed on concrete, EPDM and PVC with a maximum inclination of up to 5 degrees.
By eliminating the need to drill the structure or to use any tools, this anchor point represents an easy-to-use safety element which can be implemented in places where traditional anchoring systems are impossible to install. By the miniaturised, ergonomic design of the weights, the user can access the terrace roofs without the need for specific lifting equipment to install the anchor point.
Specification
- 4 arms made of galvanised steel.
- 24 concrete weights.
- Rotary anchor point.
- Conforms to standard EN 795 E /2012.
No Tools Required
- The connecting plate is set up with no need to drill holes in the roof.
- The arms click easily into the plate.
- Weights automatically interlock.
Easy set up
- Takes less than 5 minutes to set up.
- The system uses ergonomic weights with large handles.
- Overall weight is distributed across 24 separate weights making it easy to lift and carry.
- The weights are easy to install on the arms.
Enhanced fall protection
- 360 degree movement possible thanks to the rotary anchor point.
- Compatible with a variety of fall arrest devices.
Extremely versatile
- Adapts to all horizontal roofs meeting European requirements.
- Its weight and volume allows for installation in places where traditional anchoring systems cannot be installed.
- Can be placed on a slope with an inclination of up to 5 degrees.
- Can be installed without penetrating the roof surface.
- Can be installed on the following roof surfaces: EPDM, bitumen, PVC.
Pricing
Contact Us About This Product
If you wish to receive a quote for this product, please use the 'Pricing' tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Buy/Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommend as we will be able to suit your needs much more efficiently.
Share this page!

Save this QR code
for use on Smart Phones