This 300kg gantry hoist has a 30m height of lift which is designed to be used within scaffolding or on a flat room where there is no scaffold to attach a lifting hoist to. It is ideal for the small builder or larger contractor to lift material from the ground or lower material to the ground safely.
It has a running beam 3.3m long and allows an overhang of 1m beyond the edge of the safety board to enable material to be maneuvered along the hoist runway safely and without effort. It has a top limit lever and micro switch to stop the hoist when it is at the top of its lift safely. The hook has a spring loaded safety catch to keep the load carrier within the hook. The Hoist also has a Brake to control the travel along its runway and Rubber stops at each end of the travel.
To comply with lifting regulations it comes complete with a front kickboard and lockable back ballast boxes (150Kg in each box required NOT SUPPLIED)
- Capacity:
- Max. working height:
- Single-phase 230V/50Hz electric motor
- IP67 plug
- Frame with 4 aluminium wheels
- Upper limit safety device
- Direct controls with 3-pushbutton 1.5-m pendant control
- Positioning brake
- Self-braking motor with magnetic device
Specifications
| Maximum capacity |
kg |
300 |
| Av. Full load lifting speed |
m/min |
19 |
| Max. working height |
m |
30 |
| Ø steel rope |
mm |
5 |
| Rope length |
m |
31 |
| Motor power rate 110V/50Hz |
kW |
1.1 |
| Motor speed |
rpm |
1320 (230V)/1320(110V) |
| Running current |
A |
18 (110V) |
| Machine weight |
kg |
50 |
| SPL in operator’s position |
dB(A) |
<75 |
| Dimensions w/l/h |
mm |
330/780/380 |
| Packing dimensions w/l/h |
mm |
350/820/440 |
