Crosby 'G2130A' Grade 80 Alloy Bolt Type Lifting Bow Shackles with Nut & Split Pin, WLL Range from 2000kg to 17,000kg

Crosby 'G2130A' Grade 80 Alloy Bolt Type Lifting Bow Shackles with Nut & Split Pin, WLL Range from 2000kg to 17,000kg

Crosby grade 8 (80) bolt type alloy anchor shackles (Omega Shackles), with an 8/1 factor of safety.

Model: 

Crosby G-2130A / G8ABS-3562

Crosby 'G2130A' Grade 80 Alloy Bolt Type Lifting Bow Shackles with Nut & Split Pin, WLL Range from 2000kg to 17,000kg

  • Capacities 2 to 17 metric tons.
  • Working Load Limit permanently shown on every shackle.
  • Forged Alloy Steel - Quenched and Tempered, with bow and bolt.
  • Hot Dip galvanized.
  • Shackles can be RFID EQUIPPED.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
  • Type Approval and certification in accordance with DNV Type Approval under DNV 2.7-1.
  • Shackles are Quenched and Tempered and meets DNV impact requirements of 42 joules (31 ft. Ibs.) at -40 degree C (-40 degree F).

Additional

Bolt Type Anchor shackles with thin head bolt – nut with cotter pin. Meets the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 3, except for those provisions required of the contractor.

Metric Dimensions & Specifications

Nominal Size (in.) Working Load Limit (t)* G-2130A Stock No. Weight Each (kg) Dimensions (mm) Tolerance +/-
A B C D E F H L N C A
1/2 2 1219472 0.36 20.6 16 47.8 12.7 33.3 30.2 83.5 58.5 12.7 3.3 1.5
5/8 3-1/4 1219491 0.62 26.9 19.1 60.5 16 42.9 38.1 106 74.5 17.5 6.35 1.5
3/4 4-3/4 1219516 1.23 31.8 22.4 71.5 19.1 51 46 126 89 20.6 6.35 1.5
7/8 6-1/2 1219534 1.79 36.6 25.4 84 22.4 58 53 148 102 24.6 6.35 1.5
1 8-1/2 1219552 2.28 42.9 28 95.5 25.4 68.5 60.5 167 119 26.9 6.35 1.5
1-1/8 9-1/2 1219578 3.75 46 31.8 108 28.7 74 68.5 190 131 31.8 6.35 1.5
1-1/4 12 1219598 5.31 51.5 35.1 119 31.8 82.5 76 210 146 35.1 6.35 1.5
1-3/8 13-1/2 1219614 7.18 57 38.1 133 35.1 92 84 233 162 38.1 6.35 3.3
1-1/2 17 1219632 8.62 60.5 41.4 146 38.1 98.5 92 254 175 41.1 6.35 3.3
Dimensional Drawing

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 8 times the Working Load Limit. For Working Load Limit
reduction due to side loading applications, see page 94 ('Downloads' tab above).

Imperial Dimensions & Specifications

For Imperial Dimensions and Specifications click the 'Downloads' tab above and view the 'Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Imperial (Page 81)' PDF.

Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Imperial (Page 81).pdf

Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Imperial (Page 81)

(approx. 0.4Mb)
Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Metric (Page 81).pdf

Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Metric (Page 81)

(approx. 0.5Mb)
Shackles - Applications Information (Page 94).pdf

Shackles - Applications Information (Page 94)

(approx. 0.2Mb)
Part N° Nominal Size (in.) Working Load Limit (t) Weight Each (kg) Unit Price Quantity
3562-T7591
1219472
1/2 2 .36 Quote Required
3562-T7592
1219491
5/8 3-1/4 .62 Quote Required
3562-T7593
1219516
3/4 4-3/4 1.23 Quote Required
3562-T7594
1219534
7/8 6-1/2 1.79 Quote Required
3562-T7595
1219552
1 8-1/2 2.28 Quote Required
3562-T7596
1219578
1-1/8 9-1/2 3.75 Quote Required
3562-T7597
1219598
1-1/4 12 5.31 Quote Required
3562-T7598
1219614
1-3/8 13-1/2 7.18 Quote Required
3562-T7599
1219632
1-1/2 17 8.62 Quote Required
Add to Quote Basket   ?  
  • Capacities 2 to 17 metric tons.
  • Working Load Limit permanently shown on every shackle.
  • Forged Alloy Steel - Quenched and Tempered, with bow and bolt.
  • Hot Dip galvanized.
  • Shackles can be RFID EQUIPPED.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
  • Type Approval and certification in accordance with DNV Type Approval under DNV 2.7-1.
  • Shackles are Quenched and Tempered and meets DNV impact requirements of 42 joules (31 ft. Ibs.) at -40 degree C (-40 degree F).

Additional

Bolt Type Anchor shackles with thin head bolt – nut with cotter pin. Meets the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 3, except for those provisions required of the contractor.

Metric Dimensions & Specifications

Nominal Size (in.) Working Load Limit (t)* G-2130A Stock No. Weight Each (kg) Dimensions (mm) Tolerance +/-
A B C D E F H L N C A
1/2 2 1219472 0.36 20.6 16 47.8 12.7 33.3 30.2 83.5 58.5 12.7 3.3 1.5
5/8 3-1/4 1219491 0.62 26.9 19.1 60.5 16 42.9 38.1 106 74.5 17.5 6.35 1.5
3/4 4-3/4 1219516 1.23 31.8 22.4 71.5 19.1 51 46 126 89 20.6 6.35 1.5
7/8 6-1/2 1219534 1.79 36.6 25.4 84 22.4 58 53 148 102 24.6 6.35 1.5
1 8-1/2 1219552 2.28 42.9 28 95.5 25.4 68.5 60.5 167 119 26.9 6.35 1.5
1-1/8 9-1/2 1219578 3.75 46 31.8 108 28.7 74 68.5 190 131 31.8 6.35 1.5
1-1/4 12 1219598 5.31 51.5 35.1 119 31.8 82.5 76 210 146 35.1 6.35 1.5
1-3/8 13-1/2 1219614 7.18 57 38.1 133 35.1 92 84 233 162 38.1 6.35 3.3
1-1/2 17 1219632 8.62 60.5 41.4 146 38.1 98.5 92 254 175 41.1 6.35 3.3
Dimensional Drawing

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 8 times the Working Load Limit. For Working Load Limit
reduction due to side loading applications, see page 94 ('Downloads' tab above).

Imperial Dimensions & Specifications

For Imperial Dimensions and Specifications click the 'Downloads' tab above and view the 'Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Imperial (Page 81)' PDF.

Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Imperial (Page 81).pdf

Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Imperial (Page 81)

(approx. 0.4Mb)
Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Metric (Page 81).pdf

Crosby 2130A Alloy Bolt Type Shackles Grade 80 - Metric (Page 81)

(approx. 0.5Mb)
Shackles - Applications Information (Page 94).pdf

Shackles - Applications Information (Page 94)

(approx. 0.2Mb)
Part N° Nominal Size (in.) Working Load Limit (t) Weight Each (kg) Unit Price Quantity
3562-T7591
1219472
1/2 2 .36 Quote Required
3562-T7592
1219491
5/8 3-1/4 .62 Quote Required
3562-T7593
1219516
3/4 4-3/4 1.23 Quote Required
3562-T7594
1219534
7/8 6-1/2 1.79 Quote Required
3562-T7595
1219552
1 8-1/2 2.28 Quote Required
3562-T7596
1219578
1-1/8 9-1/2 3.75 Quote Required
3562-T7597
1219598
1-1/4 12 5.31 Quote Required
3562-T7598
1219614
1-3/8 13-1/2 7.18 Quote Required
3562-T7599
1219632
1-1/2 17 8.62 Quote Required
Add to Quote Basket   ?  

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top