Crosby McKissick Wire Rope Sheaves

Quick Ref: CN-1111

All Variations and Types of Sheave Available, Contact us for a competitive quote.

Crosby McKissick wire rope sheaves are available at many capacities, diameters, wire line sizes and bearing types. We also offer a special bespoke design service where Crosby will manufacture a pulley sheave to your specification.

Through the McKissick range Crosby lifting gear probably provide the largest range of industrial pulley sheaves in the world

McKissick sheaves are available finished bore, common bore, bronze bushed, with roller bearings or with tapered roller bearings
Crosby Sheaves are suitable for wire rope or manila rope of a wide variety of diameters.
Special Sheaves can be made to customers bespoke dimensions and safe working loads. Contact our lifting experts for advice.

Quote Only

Crosby McKissick Finished Bore Pulley Sheaves

McKissick Finished Bore Sheaves.

McKissick Finished Bore Sheaves can be equipped with bushings or bearings at an optional charge. Roll Forged sheaves are available in sized up to 72" in diameter. 14" diameter sheaves and larger are Roll Forged with Flame hardened grooves to minimum Rockwell 35C.

Quote Only

Crosby McKissick Common Bore Pulley Sheaves

McKissick Common Bore Sheaves.

The McKissick Stepped hub eliminates stress failure in the weld, common in normal hub designs. The hub is pressed into place with complete metal-to-metal contact. This helps ensure an accurate alignment to the hubs axis so there's no wobble or lopping of the rotating sheave.

Quote Only

Crosby McKissick Bronzed Bushed Pulley Sheaves

McKissick Bronzed Bushed Sheaves. Roll Forged sheaves are available in sizes up to 72" in diameter. McKissick Bronze Bushed Sheaves are equipped with S.A.E. 660 Bronze Bushings for cold finished shafts with "Figure 8" oil groove. For sizes not listed, McKissick Finished Bore Sheaves can be equipped with bronze bushings at an optional charge.

Quote Only

Crosby McKissick Roller Bearing Pulley Sheaves

McKissick Roller Bearing Sheaves. Roll Forged™ sheaves are available in sized up to 72" in diameter. McKissick® Roller Bearing Sheaves are designed to operate on shafts carbonized to 660 Rockwell "C" and ground to +/- .0005 of the indicated shaft size. Some sizes are available with an optional inner race. For sizes not listed, McKissick® Finished Bore Sheaves can be equipped with roller bearings at an additional charge.

Quote Only

Crosby McKissick Tapered Bearing Pulley Sheaves

McKissick Tapered Bearing Sheaves.

McKissick® Tapered Bearing Sheaves are designed to operate on shafts machined to +/- .0005 of the indicated shaft size. Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing. For sizes not listed, McKissick® Finished Bore Sheaves can be equipped with tapered Bearings at an addtional charge.

Roll Forged™ sheaves are available in sized up to 72" in diameter