Search Results for "crosby"- 261 items found

Crosby Jaw & Eye Turnbuckles for Lifting, Holding And Tensioning

Crosby Eye & Eye Turnbuckles Certified for Lifting, Holding And Tensioning

Cross Beam Jib.

Crosby HR1200 Side Pull Hoist Rings, Eye for Fitting to Shackles

Crosby Hoist Ring To Chain.

Our comprehensive range of Crosby HR125C Hoist Rings are designed with an integrated chain connector to be connected to lifting chain making this option of swivel hoist ring very versatile and are options for rings with capacities from 2 to 8.2 tonnes WLL. The chain grab is designed to fit Grade 8 Chain size 7, 8, 10, 13 and 16mm and the body of the swivel hoist ring is made from forged Alloy Steel with a design factor of safety at ratio  4:1. Individually Proof Tested to 2-1/2 times Working Load Limit. "Yellow Chromate" finish for increased corrosion protection. Full 360 degrees swivel and 180 degrees pivot action.

Crosby Stainless Steel Swivel Hoist Ring Swivel Eye Bolt

Crosby galvanised forged wire rope clip / grip.

Crosby bolt type anchor shackles (omega shackles) with nut & split pin for added safety.

Crosby alloy steel bolt type safety shackles.

Features: Forged Alloy Steel 2 thru 200 metric tons. Cast Alloy Steel 250 thru 400 metric tons. Working Load Limit is permanently shown on every shackle. All sizes are individually proof tested to 2.0 times the Working Load Limit. Pins are galvanized and painted red.
Certification must be requested at time of order. Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 C.

Vertical Lifting Drum Clamp with Locking Device

Vertical Drum Grab/Clamp.

McKissick Bronzed Bushed Sheaves. Roll Forged sheaves are available in sizes up to 72" in diameter. McKissick Bronze Bushed Sheaves are equipped with S.A.E. 660 Bronze Bushings for cold finished shafts with "Figure 8" oil groove. For sizes not listed, McKissick Finished Bore Sheaves can be equipped with bronze bushings at an optional charge.

McKissick Common Bore Sheaves.

The McKissick Stepped hub eliminates stress failure in the weld, common in normal hub designs. The hub is pressed into place with complete metal-to-metal contact. This helps ensure an accurate alignment to the hubs axis so there's no wobble or lopping of the rotating sheave.

McKissick Roller Bearing Sheaves. Roll Forged™ sheaves are available in sized up to 72" in diameter. McKissick® Roller Bearing Sheaves are designed to operate on shafts carbonized to 660 Rockwell "C" and ground to +/- .0005 of the indicated shaft size. Some sizes are available with an optional inner race.  For sizes not listed, McKissick® Finished Bore Sheaves can be equipped with roller bearings at an additional charge.

McKissick Finished Bore Sheaves.

McKissick Finished Bore Sheaves can be equipped with bushings or bearings at an optional charge. Roll Forged sheaves are available in sized up to 72" in diameter. 14" diameter sheaves and larger are Roll Forged with Flame hardened grooves to minimum Rockwell 35C.

Shoulder Rivet Eye Bolts.

Horizontal lifting clamp IPHOZ is suitable for the lifting and transfer of steel plates that will bend or sag when lifted in the horizontal position.

Vertical Lifting Clamp for Concrete, Pipe Sections and Wells.

 

 

Crosby Alloy Chain (Grade 80). Black painted finish. WLL Range 1.1t to 32.8t

Temporary Tackle-Eye Bulb Profile Clamp.