LIFTINGSAFETY

Search Results for "Tractel"- 333 items found

Not the results you were looking for? Try broaden your search terms.

121

Tractel Volt-Trac Electric Chain Hoist, 400v 3ph 50Hz. Range from 250kg to 2000kg

Various suspension options including hook, eye, manual trolley or electric powered trolley.

122

Tractel HT46BA VertyTrac (With Auto Buckles) Fall Arrest Harness With Front and Rear 'D' Rings and 2 x Additional Chest 'D' Rings

HT46BA safety harness in sizes S, M, XL to EN361.

Tractel HT46BA Harness is derived from the HT44 to which three automatic buckles have been integrated to facilitate fitting by a quick-closure system and an easy-to-adjust design. It has 1 back anchorage point 1 sternal anchorage and 2 chest anchorage. Very comfortable to use over extended work periods, thanks to its harness-type leg straps. There's possibility for using a restraining lanyard when in the work position, connected to two chest fastening points, also possibility for using a fall arrest connected to sternal anchorage. Available in sizes S, M and XL.

124

William Hackett Geared Travel Girder Trolley - Range 500kg to 10,000kg

Hackett geared (manual hand chain driven) travel beam trolleys.

125

Tractel Tirak Mobile Lifting Hoist In Heavy Duty Frame with Cable Reeling Drum - Range from 300kg to 3000kg

Tirak Mobile electric winch / hoist for materials. 230v, 110v and 400v Options.

The TIRAK with its compact frame is lighter, smaller and more economic than a crane or a drum winch with the same capacity and complete with a similar length of wire rope.  Features include: Terminal switch for limiting the height of lift wherever desired, emergency lowering in power failure at a controlled speed, electrical system suitable for use on building sites, easy to operate push button pendant control and heavier loads can be handled using winch with snatch blocks. Full safety features including limit switches and release/lower facility.

126

Tractel TOPAL PBM Adjustable Single Lifting Beams Pal-Beam Upper Hook By Central Ring - Range from 1000kg to 6000kg

Adjustable Single Lifting Beams.

Topal Industries PBM Single Beam Spreader.

  • Suspension from above via central ring with 2 separate compensating beams.
  • WLL 1000 kg to 5000 kg.
  • Usefull length of 1000 mm to 4000 mm.
127

Tractel VertyTrac HT43 A (Automatic Buckles) Fall Arrest Harness with Front and Rear 'D' Rings and 2 x Chest 'D' Ring S,M,XL

Harness with 1 dorsal Forged D clip, 1 sternal and 2 thoracic ones to EN361. Automatic Buckles

Buckles: Metal: yellow zinc bichromated, stamped: yellow zinc bichromated. Plastic components: PP. PE webbing's, colour-fast, Width: 45mm
Machine stitched: PE 12/3. Back anchor point: yellow zinc bichromated. A chest anchor point. Adjustable thoracique webbing with quick fitting buckle. Weight: 920g. Size: S, M, XL
128

Tractel HT46 VertyTrac (Standard Buckles) Fall Arrest Harness With Front and Rear 'D' Rings and 2 x Chest 'D' Rings

Multi purpose harness ideal for use within the industrial maintenance sectors to EN361.

Tractel HT 46 Harness - multiple purpose utilization, particularly in an industrial maintenance environment, very comfortable to use over extended work periods, thanks to its harness-type leg straps, possibility for using a restraining lanyard when in the work position, connected to two chest fastening points. Possibility for using a fall arrest connected to sternal anchorage. Blue harness with black seat straps straps made of 45mm polyester, Buckles made of singed steel adjustment, Buckles made of yellow dichromate steel. Main Components of HT46 Safety Harness 1 back fastening point 1 sternal anchorage 2 chest anchorage 2 leg strap adjustments 2 shoulder strap adjustments 1 sternal adjustment.
129

Tractel "CAROL Rescue" Man-Riding Wire Rope Lifting Winch - 20m/30m Max Rope Length

Manriding Winch Includes a Bracket for Fixing to the Tracpode Tripod, Safe Working Load 250Kg

The Carol rescue winch satisfies all rupture and endurance test requirements as per standard EN13157.It is designed for use with the Tractel Tracpode Tripod. The optional 5mm cable is available in 20m or 30m lengths. The carol winch can be used for work in suspension, if a second safety fall arrest is used. Tractel Carol Rescue Winch Datasheet. A Variable-length control crank handle (6 adjustment positions) allows the user to either apply maximum control force, or perform rapid cranking for small loads or rewinding. The Self-locking crank handle adjustment knob offers maximum user comfort and safety and allows for the adjusting of the crank handle or removal of it to prevent operation of the winch.

130

Tractel CE01 Adjustable Work Positioning Belt For Use With Pole strap & Restraint Lanyard with 2 x Side 'D' Rings - S, M and XL

Working Belt with two lateral hitch D rings.

Tractel work positioning belt is not designed to be used as a fall arrest device. Has 2 Stainless steel D rings for side anchorage, is adjustable with quick opening, and is lightweight and rot-proof. Can be combined with any tractel harness using belt loops making a fully integrated belt-harness assembly. Available in 3 sizes - Small, Medium and Extra large.

131

Tractel "Dynarope HF36" Tension Meters - WLL Range from 500 daN to 40,000daN and For use with 20 to 44mm wire rope

Electronic tension load cells designed to measure effort applied to a wire rope without disassembling the rope.

132

Tractel "ETA", "ETC" & "ETM" Pulley Sheave Snatch Blocks for Wire Rope Heavy Duty Off-Shore - Range from 2000kg to 32000kg

Heavy duty snatch block for off-shore purposes with stud shackle, hook or axle fixing.

The snatch blocks of the ETA/ETC/ETM’s range are mainly used for temporary applications for pulling and lifting, when quick assemblies and/or dismantlings are required. They can be suspended to a fixed or mobile anchorage point with the right strength corresponding to the required load. Thanks to an easy instalment, a light weight and attached locking parts, these snatch blocks are most often used on vessels and off-shore platforms.
133

Tractel "HT Promast" 5 Point Rope Access Harness with Front and Rear Connection Points and Work Positioning Belt

Designed for work on ropes during extended-duration suspended interventions. 2 fall arrest points, 1 belly suspension point and 2 working positioning points on belt.

134

Tiger "APT" Adjustable Push Travel Trolleys - Range from 1000kg to 10,000kg

Manual travel beam trolley with screw spindle for adjustment.

135

William Hackett ATEX Push Travel Girder Trolley - Range 500kg to 2000kg

Hackett ATEX manual push / pull travel beam trolley.

136

Tiger "AGT" Adjustable Geared Travel Trolleys - Range from 1000kg to 10,000kg

Geared travel beam trolley with screw spindle for adjustment.

137

Tractel Adjustable Fall Arrest Beam Clamp Anchorage Point, Width Range 75mm - 235mm

Tractel Corso Beam Clamp Anchor with adjustable threaded bar, EN795 Class B

This hitching clamp is equipped with an anchoring ring, with a compact and strong construction; this can also be quickly and easily adjusted with its removable handle. It's adjustable from 75mm to 235mm.

140

Tractel "TU16P" Pneumatic Tirfor, Compressed Air Operation Lifting and Pulling Machine with Infinite Height of Lift- 1600kg

Pneumatic pulling machine weighs only 40 kg. Infinite HOL (rope length)

The Tirfor® Principle - A Tirfor® has neither wheels nor gears. Two jaws alternately pull the wire rope and the load in the required direction, just like pulling on a rope with both hands. The jaws are self clamping, proving immediate and gradual safety. The heavier the load , the tighter they clamp. A release mechanism allows the wire rope to be inserted between the jaws.

Features: Constant control of the load during lifting and lowering with accuracy to within one millimetre, when stationary the load is automatically distributed between the two jaw units, overload safety device, TU range approved for lifting personnel in most countries.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top