The CY Non-welded Hinged Universal Clamp is a variant of our successful CZ92 Series Clamp. The clamp has all the innovative design features of the CZ92 clamp and incorporates a hinged hook ring. This device enables the clamp to be used at any angle thus permitting awkward lifts previously considered hazardous. The standard clamp is fitted with a cam operated locking mechanism but this can be replaced (at no additional cost) by a chain pull locking mechanism. The CY range is fitted with hardened steel pads and jaws that incorporate tooth wear indicators. The clamp is designed to lift and handle plate with a surface hardness up to 300 Brinell. Contact our sales/technical department if plate to be lifted has a higher surface hardness. Other clamps in our range are available for this application.
Used on all hot rolled structural steel plates and sections upto a surface hardness of 300 Brinell/32 Rockwell C. Lifts plate from the horizontal to the vertical position and vice versa through 180. Fitted with hold-open and lock-closed device (not 92500).
Available to suit additional plate thicknesses
The Camlok CZ Series Vertical Plate Clamp differs from our CZ92 series in that the body of the clamp is a welded construction. The series has a lifting capacity range of 1 to 30 tons. The CZ series clamp can be used to lift plate from the horizontal to vertical position and vice versa. This clamp series is suitable for handling steel plate with a surface hardness of up to 300 Brinell. The standard clamp is fitted with a hook ring this can be replaced with a short length of chain and master link. The clamp can be supplied with alternative body shapes, Clamp jaws and pads are manufactured from high tensile steel and have heat treated serrated teeth.
The Twin Jaw Range of Clamps from Camlok have been designed specifically for lifting steel plates. The main difference between these and the single jaw clamps is that the TJC has a unique twin moving jaw arrangement. This Design means the TJC can be used in applications where a larger jaw capacity is required, with a low minimum weight.
The LJ range of clamps is specifically designed to lift plates without marking or damaging the surface finish. The clamp is suitable for lifting various types of plate materials. eg. - steel, timber etc. The clamp is particularly suitable for lifting thin gauge steel plate, aluminium and stainless steel. The clamp is also suitable for steel with a surface hardness above 300 Brinell.
Options on Camlok Non marking clamp - 500kg/plate diameter 0 - 10mm, 1500kg/plate diameter 0 - 20mm.
LiftingSafety uses cookies to improve your user experience, To accept this, please click the 'accept' button below.