Search Results for "RidgeGear"- 80 items found

Ridgegear "RGH5" Three Point Fall Arrest & Rescue Harness with Front, Rear and Shoulder Attachment Points

3 point safety harness fitted with front, rear and right-hand side shoulder rescue attachment points. Optional fast fit buckles.

Ridgegear "RGH2 Eco" Environmentally Friendly Two Point Fall Arrest Harness with Front and Rear 'D' Ring to EN361

Ecofriendly two point safety harness produced from upcycled PET bottles, fitted with a rear dee and a chest mounted front dee.

Ridgegear "RGH2 Glow" High Visibility Two Point Fall Arrest Harness with Front and Rear 'D' Ring to EN361

Hi-vis orange two point safety harness with reflective yarn, fitted with a rear D and a chest mounted front D. Optional fast fit buckles.

Ridgegear RGR7 Hand Operated Wire Rope Man-riding Rescue Winch 140kg, Wire Rope Length Options 15m or 50m

New Rescue Winch Featuring an Energy absorbing unit for additional safety

Ridgegear "RGH17" 5-Point Rope Access Harness with Front, Rear, Side and Ventral Attachment Points

Premium Y-shaped rope access harness with support pads on the legs, waist and shoulders. 6 built-in tool loops.

Ridgegear "RGL13" Adjustable Fall Arrest Single Leg Lanyard. Choice of Karabiner, Scaffold Hook or Snap Hook. 1.8 metre

Adjustment fall arrest single leg lanyard supplied 1.2-1.8 mtr no hooks supplied.

Ridgegear Adjustable Fall Arrest single leg Lanyard is an industry standard, and normally the minimum equipment issued with a harness for working at height. The 40kN webbing used in the manufacture provides greater strength compared to other webbing and systems. This lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. The lanyard is available 1.2 to 1.8m. NO HOOKS SUPPLIED.

Ridgegear "RGA4" Self retracting Fall Arrest Retriever, Inertia Reel Rescue Block with Retrieval Handle. Galv Cable Lanyard - 15 Metre

Retractable "self retracting lifeline" (SRL) three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capacity.Conforms to EN360 & EN1496

Ridgegear 15 metre Wire Fall Arrest and Rescue Block is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This unit can be used as a standard fall arrest block but in the event of a fall, the operative can be winched up or down to safety almost immediately.
Specifications Accredited to: EN 360 and EN 1496 A&B Cable spec: 15 x 5 galvanised steel wire rope (also available with stainless steel wire) Connector: Double action, high tensile steel alloy Weight: 11.35 Features: Fall indicating connector, retrieval system Size mm: L 340 x W258 x D 80 Max arrest force <6kN Approx arrest distance: 0.5m. Available with either a Galvanised steel wire rope or Stainless steel wire rope.

Ridgegear "RGA26" Super Lightweight Fall Arrest Inertia Reel Block (Fall Limiter) Galvanised Cable Lanyard with Swivel Snap Hook - 6 Metre

6m multi purpose Retractable "self retracting lifeline" (SRL) fall arrest block with fall indicating connector. Conforms to EN360.

Ridgegear 6m lightweight Fall Arrest Block is a lightweight and small multi purpose fall arrest block, which allows uninhibited movement during normal working activity. For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task. The cable can come in two different types - either 5mm Galvanized steel wire rope, or can come in 5mm stainless steel.

Ridgegear "RGA2" Fall Arrest Inertia Reel Block (Fall Limiter) Galvanised Steel Cable Lanyard with Swivel Snap Hook - 10 Metre

Retractable "self retracting lifeline" (SRL). Fall arrest block 10m 5mm galvanised steel cable,(available in stainless) EN360 (fall arrest)

Ridgegear 10m Fall Arrest block is a multi purpose fall arrest block, which allows uninhibited movement during normal working activity. The carrying handle is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a karabiner. For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task.
The RGA2 has a working length of 10 metres which is available in either 5mm Galvanised steel or a 5mm Stainless steel.

Ridgegear "RGP11" Ulility Multi Purpose Pole strap Work Positioning Lanyard for operational (When At Height). Adjustment from - 0.8m - 1.8 Metre

Pole strap with Specially designed controlled release adjuster buckle to ensure safe operation and adjustment.

Specially designed controlled release adjuster buckle to ensure safe operation and adjustment. Double layer abrasion pad protects the strap from damage. Karabiner connected to nylon thimble for ease of operation. Velcro pad sewn to abrasion pad loop to allow for temporary attachment of pole strap to harness during climbing. Velcro strap. sewn to hand hold provides a safe means of retaining loose end. Additional label sewn inside a pocket to allow for entering user details. Twisted snap hook and 2 part triangle/karabiner ensures flat surface contact with pole. 40mm sliding loop keeps the straps level and reduces the risk of premature webbing wear through the buckle. Available with different hook/karabiner options as required. Fully approved, trialled and used extensively by major utility company.  

Ridgegear "RGA12" Guided Rope Grab Fall Arrester.

Manual operation grab for use with 11mm Kernmantle rope.

Ridgegear "RGP4" 6 Metre Adjustable Work Positioning Lanyard from Polyester Covered "Wire Rope" c/w Sliding Jaw Adjuster. "Adjustable Restraint Lanyard"

Multi purpose work-postioning device.

The RGP4 is a multi purpose work positioning device, designed to be clipped to the side D's of a harness, work positioning belt or be used independently. Can be supplied in a variety of lengths.

Ridgegear "RGB2" Work Positioning Belt

For use with pole strap & restraint lanyard with 2 x Side 'D' ring & gear loops.

Ridgegear Work Positioning Belt with Gear Loops is fitted with two side mounted D rings for ease of attachment and the back pad provides some lumber support and comfort, especially when tools are hung from the belt loops. The RGB2 is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system. The uses for this restraint belt are similar to the RGB1, however to prevent the user from dropping tools from height, all tools can be secured to the gear loops by a cord lanyard and also clipped to the belt when not in use.

Ridgegear "RGR6" Nappy Escape Harness

Nappy escape harness easy to fit in an emergency.

Ridgegear RGH6 Nappy Escape Harness is an extremely lightweight, quick and easy to be donned in a matter of seconds.

Ridgegear "RGK3" Double Action Steel Twistlock Karabiner. 22mm Gate Opening

Steel automatic twist lock connector with a 50kN minimum breaking strength.

This heavy weight karabiner is primarily fitted to the ends of fall arrest lanyards, due to its high MBS. The twistlock closure makes this karabiner extremely safe to use, as it locks automatically when it is clipped into anchorage point. With a 22mm gate opening. Accredited to EN362.

Ridgegear "RGK10" Steel Double Action Snap Hook. 19mm Gate Opening

Steel automatic snap hook with captive eye. Designed to be a permanent lanyard fixure. 23kN minimum breaking strength.

The gate opening of the RGK10 means that this item is normally used for clipping directly on to a D ring on a harness. Usually fitted to fall arrest blocks or fixed lanyards. The double action snap closure on this device means that it cannot be accidentally opened. Accredited to EN362.

Ridgegear "RGK1" Double Action Steel Screwgate Karabiner. 17mm Gate Opening

Steel manual screw gate connector with a 23kN minimum breaking strength.

The RGK1 is the workhouse of the industry, used from rope access, to fall arrest applications. This item is also used in the leisure industry for caving and rescue. The screw gate closure on this device means that the user must manually lock the RGK1 after fitting. With 17mm gate opening. Accredited to EN362.

Ridgegear RGHL1 Temporary Fall Arrest Lifeline Suitable for 2 Users - 10m or 20m

Temporary ratchet tension horizontal lifeline.

Ridge Gear RGHL1 Temporary Fall Arrest Lifeline is a simple to install horizontal webbing safety line, incorporating a ratchet tensioner. For restraint purposes, the RGHL1 safety line can be used in conjunction with fixed length or adjustable restraint and fall arrest lanyards. Available in two different options, 10m is a weight of 3kg. 20m is a weight of 4kg.

Ridgegear "RGL5R" Fixed Length Rope Restraint Lanyard. 1m, 1.4m or 1.8m

Single leg non-adjustable 11mm kernmantle rope restraint lanyard with a wide variety of connector options.

Ridgegear "RGL14" Twin Leg Fixed Length Restraint Lanyard. 1.4m or 1.8m

Two leg non-adjustable web work restraint lanyard with a choice of connectors.

Ridgegear RGL14 Twin Leg Restraint Fall Arrest Lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. Movement between anchorages can be achieved by means of double clipping.