Newest Products

High grade stainless steel manual chain hoist designed for use in cleanroom, chemical, food industry or corrosive environments. 500kg to 3 tonne lifting capacity options.

Hackett hydraulically driven chain hoist designed specifically for use with remote operated vehicles (ROV) under water. 3.2t to 20t lifting capacity options.

Hackett manual hand chain hoist designed specifically for use with remote operated vehicles (ROV) under water. Various drive options available. 3.2t to 50t.

Eye + eye angular contact swivel specially designed for lifting applications with high rotational speed involved. Capacity options from 750kg up to 25 tonnes.

Jaw + jaw angular contact swivel specially designed for lifting applications with high rotational speed involved. Capacity options from 750kg up to 25 tonnes.

Self-retracting lifeline with 30 metre galvanised steel wire rope. Winch function allows for rescue after arresting a fall.

Wireless compression load cell with optional bluetooth and handheld display. Weighing capacity options from 5 tonne up to 1000 tonnes.

Wireless load cell with onboard display, designed for instances where close-up load monitoring is required, such as when opearting hoists.

Stainless steel weld-down lifting point that can be loaded on all sides with increase WLL's up to 7.5 tonnes when the load is in the load ring plane.

Wire rope snatch block with captivated shackle suspension to suit wire rope diameters from 8mm up to 32mm. Capacity options from 2 tonne up to 22 tonnes.

Zinc lamellar coated male bolt-on double articulated swivel load rings (hoist ring) with eye designed for external and offshore use. M10 to M30 metric and 3/8" to 1" imperial thread.

Zinc lamellar coated male bolt-on double articulated swivel load rings (hoist ring) with lifting eye designed for external and offshore use. M10 to M30 metric and 3/8" to 1" imperial thread.

Rugged construction steel body lever hoist with lightweight and portable design. 250kg or 500kg lifting capacity.

Atex certified spark resistant lever hoist that can be supplied with a standard or offshore corrosion protected finish, with option stainless steel load chain. Lifting capacity options from 800kg to 20 tonne.

Hackett Atex certified manual hand chain hoist suitable for potentially explosive environments. 500kg up to 50 tonne.

Hacketts manual chain hoist with quad pawl design for finer adjustment and added safety. Top hook suspension, with capacity options from 500kg up to 50 tonnes.

Hacketts quiet manual chain hoist, designed specifically for areas where noise levels need to be controlled or reduced. 500kg to 50 tonne options.

Air powered chain hoist from William Hackett, with built in low-headroom air powered pneumatic trolley. Lifting capacity options from 250kg up to 20 tonnes. Atex Zone 2 as standard.

Air powered chain hoist from William Hackett, with lifting capacity options from 250kg up to 37.5 tonnes. Atex Zone 2 as standard.

Rebel self-retracting lifeline with 6m x 25mm wide webbing. Karabiner top, snap-hook bottom. Old stock. Only 3 available.

Twin trigger release offshore hook specifically designed for use with ROV manipulators in subsea rigging applications.

Guided fall arrester ladder lifeline with a tensioned 8 mm wire rope anchor line. Features a self-locking fall arrest device for safe ladder ascent and descent.

Portable manual hydraulic scissor lift table with lifting capacity options from 300kg to 500kg and lifting heights up to 1.5 metres.

Omnidirectional clamp designed to lift, hang, turn over, and pull steel structures. Capacity options from 300kg up to 6 tonnes.

Light-duty compact pallet truck with narrow, low-profile, short forks for handling small pallets. Can easily fit in a van.

Standard everyday manual pallet truck designed for heavy-duty use in store rooms, warehouses or transport environments.

Stainless steel manual spur gear chain hoist suitable for cleanroom environments. Lifting capacity options from 250kg up to 5 tonnes.

Retractable fall arrest blocks made of stainless steel and carbon steel with high strength 19mm UHMWPE webbing and tested for use on sharp edges.

The SENTRY Tripod is a durable and lightweight anchorage connector which can be used to provide a secure and stable anchorage for confined space access.

EN 361 & EN 1497 rescue harness complete with manual buckles, front and rear attachment points plus an extra D-ring attachment point for rescue means.