- Lifting Equipment
-
Height Safety
Height Safety Equipment
- Material Handling & Jacking Equipment
- Shop by Brand
- Clearance
-
Contact
Get In Touchsales@liftingsafety.co.uk +44 (0)1977 684 600
Search Results for "Camlok"- 46 items found
Not the results you were looking for? Try broaden your search terms.
Camlok 92 Series Vertical Plate Lifting Clamp
Best Seller! Camlok's standard vertical plate clamp with safety lock. Lifting capacity options from 500kg up to 3 tonnes.
Camlok DC500 Drum Lifting Clamp
Can be used as a single clamp on sealed or empty drums or 2 clamps and chain sling on open drums. Clamps sold individually. 500kg lifting capacity per clamp.
Camlok PH Pipe Hooks
Pipe section hooks sold and designed to be used in pairs for horizontally lifting and transporting pipes or tubes from each end. Supplied with shackles, but chains are not included. Capacity options from 2 to 10 tonnes.
Camlok HGC Hand Grip Clamp - 250kg
Camlok HGC hand clamp for up to 250kg and 10mm thin plates, weighs only 1.4kg
Camlok DCV500 Crane Slung, Side Mounted Drum Grab
Camlok hook suspended rim grip drum grab for steel drums. 500kg lifting capacity.
Camlok CZ Heavy Duty Plate Clamp
UK manufactured heavy-duty plate lifting clamp, designed to lift plate from the horizontal to vertical position and vice versa.
Camlok CH & HH Horizontal Plate Clamps
Plate lifting clamps sold and designed to be used in pairs for horizontally lifting plates. Available with serrated or smooth jaws, in capacities from 1 to 20 tonnes.
Camlok CY Hinged Vertical Plate Clamp
UK manufactured vertical plate lifting clamp with hinge for angled lifts from horizontal to vertical and vice-versa. Capacity options from 1 to 3 tonne to suit up to 32mm steel plates.
Camlok THK Thin Sheet Horizontal Plate Clamps
UK manufactured plate lifting clamps, designed and sold to be used in pairs, for horizontally lifting single pieces of thin sheet or plate. Capacity options from 750kg up to 9 tonnes.
Camlok RH Roller Toe Plate Clamp - Range from 1500kg to 5000kg
Camlok Roller Toe Horizontal Plate Lifting Clamps.
Camlok TCS Coil Lifting and Turning Hook
C-hook designed for safely lifting, turning and transporting of coils or reels. Capacity options from 500kg up to 3 tonnes.
Camlok TTG Horizontal Girder Lifting Clamp
UK manufactured I-beam or H-beam flange clamp for horizontally lifting and stacking. Capacity options from 500kg up to 7.5 tonnes.
Camlok TTR Girder Section Lifting Clamp
Camlok H-beam or I-beam section clamps with jaw openings from 5 to 28mm. Lifting capacity options from 750kg up to 3 tonne.
Camlok TZH Single Tine Forklift Fork Tine Mounted Hook - Range From 1500kg to 5000kg
Adjustable single tine hook to convert a fork lift truck into a crane.
Camlok CX Heavy Duty Hinged Plate Clamp
UK manufactured heavy-duty plate lifting clamps with hinge for angled lifts from horizontal to vertical or vice-versa. Capacity options from 1.5 to 10 tonnes, to suit plates up to 100mm thick.
Camlok CG Girder Lifting Clamp
Camlok girder section lifting and turning clamps with jaw sizes from 0 - 50mm. 2000kg Capacity
Camlok TSH Screw-lock Pulling Clamp
Screw-locking beam clamp with alloy safety shackle for pulling up to 180 degrees. Range from 750kg to 5000kg.
Camlok TTT Girder Section Clamp
Horizontal I-beam or H-beam lifting clamps, designed and sold to be used in pairs for lifting beam sections in the vertical position with the flanges positioned horizontally. Capacity options from 500kg to 3 tonnes.
Camlok TSZ Two-Way Pulling Screw Clamp
Manual screw locking beam clamp with two lifting points. Range 500kg to 7500kg.
Camlok TTB Big Bag Lifting Beam, Capacity 2000kg
Cruciform Spreader Beam for Lifting Big Bags, Bulk Bags, FIBC's (Flexible Intermediate Bulk Containers) or Large Totes
Camlok TJC Twin Jaw Lifting Clamp - Range from 20kg to 300kg
Camlok Twin Jaw plate lifting clamp, specially designed for lifting steel plates.
Camlok LJR & LJL Non-Marking Plate Clamps
UK manufactured non-marking lifting clamps designed and suitable for use with a variety of different materials such as steel or timber. 500kg or 1500kg capacity.
Camlok HG High Grip Plate Clamp
500kg capacity high-grip vertical plate clamp, designed for lifting stainless steel or other hardened surface plates.
Camlok DA & DAF Drum Clamps
350kg capacity low headroom steel drum lifting clamp for top/vertical lifting. DA is crane slung only. DAF is crane slung or forklift truck tine mountable.
Camlok CLB Container Bottom & Side Lifting Lugs
Bottom or side lifting eyes for shipping containers - 40 tonne (88,100 lbs) capacity per set of 4.
Camlok TPR Profile Steel Grab
Camlok lightweight I-profile steel grab. Lifting capacity options 500kg to 3 tonnes.
Camlok TBG & TST Scissor Block Grabs
Camlok scissor grab with rubber pads or teeth and with manual latching mechanism, for lifting blocks. Range from 200kg to 1000kg
Camlok TRU Round Stock Grabs
Round section lifting clamps for tubes, pipes, rolls or similar up to 600mm dia. Capacity options from 100kg up to 3 tonnes. UK manufactured.
Camlok TPZ Non-Marking Board Clamp - Range from 20kg to 1500kg
Camlok Non-Marking Board Clamp for Lifting Boards Between 5 & 150mm (various size options).
Camlok TAG & TWG Wide Jaw Vertical Plate Clamps, Capacity Range from 75kg to 5000kg
Camlok Vertical Plate Lifting Clamp, Jaw Width Options upto 200mm
Camlok CP Pile Pitching Clamp
UK manufactured plate clamps designed specifically for lifting steel piles in to position. Supplied as standard with a 15 metre remote release rope. Capacity options from 2 to 5 tonnes.
Camlok CLT Container Top Lifting Lugs
Container eye fittings for lifting from the top blocks of a shipping container. 56 tonne capacity per set of 4.
Camlok PP Pile Pulling Clamp
UK manufactured clamps specifically designed to pull and remove driven piles or trench shields. Capacity options are 3 or 8 tonnes.
Camlok BTG Concrete Pipe Clamps
Set of 3 clamps designed specifically for the lifting of concrete pipe sections. Capacity options are 1.5 or 3 tonne.
Camlok ACH Adjustable Plate Lifting Clamps
UK manufactured plate clamps with adjustable jaw opening, for horizontal lifting of plates. Sold and designed to be used in pairs.
Camlok TSA Lightweight Block Grab
Adjustable single arm block grab for lifting stone or concrete blocks and kerb stones etc. 250/500 kg. UK manufactured.
Camlok TSB Gentle Grip Non-Marking Plate Clamps
Soft-grip non-marking lifting clamps to suit up to 65mm thick plates. Capacity options from 40kg to 1250kg.
Camlok SL Shearleg / Tripod
Steel Shear-leg / Tripod with a variety of feet options to suit most working environments. Available from 500kg to 3000kg up to 3 metre high. Special designs on request.
Camlok MRC Interchangeable Multi Rail Grab
Camlok MRC series multi rail clamp for the handling of 3 to 8 rails. Range from 5000kg to 8000kg
Camlok TKG-VH Manual Balance Crane Forks
Manually balancing crane slung lifting forks. Range from 1000 to 5000 kg (4 Options)
Camlok TKG-VHS Self Balance Crane Forks
Self levelling crane forks. Capacity options from 1000 to 5000 kg.
Camlok TKA Tote Pan Grab
For lifting and transporting stackable steel tote pans. Capacity Range from 150kg to 200kg
Camlok TCK2 Coil Handler C-Hooks
UK manufactured coil handling hooks, built to meet your requirements.
Camlok MR Multi Rail Clamp - Range from 5000kg to 8000kg
Multi Rail lifting grabs for handling from 3 to 8 rails (various size options). Recommended for use in pairs.
Yale CR Single Rail Clamp, Capacity Range 1000kg or 2000kg
Single rail lifting clamp designed to lift and transfer single rails securely and safely.
Crane Fork Cage/Basket to suit Camlok 2000kg Self Balance & Manual Balance Crane Forks
Safety Cage only. Crane Forks NOT Included - Specifically Designed to Suit the TKG2.0VHS & TKG2.0VH Crane Forks.