UK manufactured plate lifting clamps, designed and sold to be used in pairs, for horizontally lifting single pieces of thin sheet or plate. Capacity options from 750kg up to 9 tonnes.
Model:
Camlok THK / PLC-344
More from:
The THK horizontal plate clamps when used in pairs are well suited for the horizontal transportation of thin steel sheet / plate.
The same basic design of the Camlok 'CH' range of clamps but have a reversed tooth jaw design, which allows the clamps to be used with thin sheets which may have a tendency to sag or flex.
Two pairs of clamps supported from a lifting beam must be used when handling long plates.
Capacities: 750kg to 9000kg.
Capacity applies to a pair of lifting clamps.
Sold in Pairs.
Designed to handle a single thin sheet that deflects.
Plate surface hardness of up to 300 Brinell / 32 Rockwell C.
Single plates only can be lifted.
Clamps are used in pairs with a 2 legged chain sling (maximum included angle not to exceed 60º) (Sold separately).
The angle from the vertical must not exceed 30°!
Shackles not included.
Designed and manufactured in the UK.
Dimensions & Specifications
Model
WLL
Plate (mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
I (mm)
Weight Per Pair (kg)
THK 750
40-750kg
0 - 25
25
72
118
81
20
161
12
86
12
3.4
THK 1500
75-1500kg
0 - 35
36
80
135
102
25
198
15
102
15
6.4
THK 3000
150-3000kg
0 - 35
38
93
168
119
30
227
20
110
20
11.4
THK 4500
250-4500kg
0 - 45
48
103
183
140
30
238
25
122
20
16.8
THK 6000
300-6000kg
0 - 60
63
124
214
176
35
284
30
110
20
23.2
THK 9000
450-9000kg
0 - 60
65
113
223
188
40
317
35
148
20
35.8
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
The THK horizontal plate clamps when used in pairs are well suited for the horizontal transportation of thin steel sheet / plate.
The same basic design of the Camlok 'CH' range of clamps but have a reversed tooth jaw design, which allows the clamps to be used with thin sheets which may have a tendency to sag or flex.
Two pairs of clamps supported from a lifting beam must be used when handling long plates.
Capacities: 750kg to 9000kg.
Capacity applies to a pair of lifting clamps.
Sold in Pairs.
Designed to handle a single thin sheet that deflects.
Plate surface hardness of up to 300 Brinell / 32 Rockwell C.
Single plates only can be lifted.
Clamps are used in pairs with a 2 legged chain sling (maximum included angle not to exceed 60º) (Sold separately).
The angle from the vertical must not exceed 30°!
Shackles not included.
Designed and manufactured in the UK.
Dimensions & Specifications
Model
WLL
Plate (mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
I (mm)
Weight Per Pair (kg)
THK 750
40-750kg
0 - 25
25
72
118
81
20
161
12
86
12
3.4
THK 1500
75-1500kg
0 - 35
36
80
135
102
25
198
15
102
15
6.4
THK 3000
150-3000kg
0 - 35
38
93
168
119
30
227
20
110
20
11.4
THK 4500
250-4500kg
0 - 45
48
103
183
140
30
238
25
122
20
16.8
THK 6000
300-6000kg
0 - 60
63
124
214
176
35
284
30
110
20
23.2
THK 9000
450-9000kg
0 - 60
65
113
223
188
40
317
35
148
20
35.8
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
