Camlok TTR Girder Section Lifting Clamp

The Camlok TTR range of 'Vertical Flange' Girder Stacking Clamps have been designed to lift, transport and stack structural steel beams in the horizontal position or 'H' position' i.e. with the flanges in the vertical position (see 'Applications' below).

The clamp is designed with the hook ring as near as to the centre of gravity of the beam as possible, The unique position of the offset suspension ring keeps the girder virtually in a horizontal position during transport.

A safety lock keeps the clamp safely locked, even before the lift begins. This allows the operator to place the clamp, lock it closed and move away from the load.

The lever ensures easy opening and closing of the clamping jaw and has a “lock open“ feature.

Long beams should be lifted using 2 clamps attached to opposite beam flanges and a spreader beam for a straight lift.

• Capacities: 0.75t, 1.5t & 3.0t.
• Can be used on girders, channels, RSJ's and handles structural beams in the 'H' position.
• Capable of near horizontal lifting
• Girders and RSJ's up to a surface hardness of 300 Brinell.
• Designed and manufactured in the UK.

Applications

Large beam lifting with 2 TTR Girder Stacking Clamps

TTR Clamp used to stack girders

Dimensions & Specifications

Model	WLL	Plate (mm)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	H (mm)	I (mm)	K (mm)	Weight (kg)
TTR 0.75	50-750kg	5 - 16	24	30	132	62	145	118	50	12	12	53	3.1
TTR 1.5	150-1500kg	5 - 25	33	53	176	76	190	152	70	15	17	69	6.8
TTR 3.0	300-3000kg	5 - 28	37	56	194	78	208	163	80	20	23	85	10.9