Crosby L3322 Swivel Hook with Bearing

• New anti-friction bearing design allows hook to rotate freely under load.
• Capacities ranging from 2 through 15 metric tonnes.
• Forged - Quenched and Tempered.
• Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
• Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. (even years after purchase of the original hook, latch assemblies can be added).
• L-3322 hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
  • Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUICCHECK ® measurement to determine if the throat opening has changed, thus indicating abuse or overload.
  • Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

Note: Use in corrosive environment requires shank and nuts inspection in accordance with ASME B30.10-1.10.4 (b)(5)(c).

Metric Dimensions & Specifications

Working Load Limit (t)	Hook ID Code*	L-3322B Stock No.†	Dimensions (mm)																Replacement Latch Stock No.
			A	B	C	D	E	F	G	H	J	K	L	M	O	R	S	AA**
2	G	1028609	1.13	76.2	38.1	44.5	91.2	38.1	25.4	29.5	26.9	22.4	194	22.4	25.4	152	16.0	50.8	1096421
3	H	1028618	1.72	88.9	39.6	50.8	101	41.1	28.7	33.3	30.2	23.9	218	23.9	27.7	170	19.1	50.8	1096468
5	I	1028627	3.17	101	39.6	57.2	122	50.8	36.6	41.4	38.1	33.3	262	28.7	34.5	203	22.4	63.5	1096515
7	J	1028636	6.35	127	49.3	69.9	159	63.5	46.0	52.3	45.2	42.2	326	36.6	40.9	251	28.7	76.2	1096562
11	K	1028645	10.1	142	52.1	79.2	191	76.2	57.2	66.8	61.2	47.8	387	41.4	52.8	298	31.8	101	1096609
15	L	1028654	16.3	180	91.9	104	211	82.6	65.8	74.7	66.5	55.6	473	49.3	57.7	366	38.1	101	1096657

* Maximum allowable proof load is 2.5 times working load limit. Designed with a 4.5 to 1 design factor. ** Deformation Indicators. † Supplied with latch attached.