Gunnebo DLP Rotating Lifting Point

The compact design of the De-centered Lifting Point (DLP) makes it ideal in narrow spaces such as corners and edge positions.

The DLP is designed in such a way that the link / lifting eye will fold over the bolt housing, meaning the lifting point takes up minimal space when not in use.

The oblong link will stand up alone which allows for fast and easy rigging, so a hook can almost be single-handedly attached - excellent especially in limited spaces. and because of this, will not rattle and clunk when attached to vibrating machines or vehicles.

Choosing the right lifting point for an operation can be a challenge since most lifting points can be used for several purposes. Safety is of course the highest priority, therefore each DLP sold has been proofloaded 2.5 times the WLL.

DLP Features

• Hexagon makes it easy to install and un-install the DLP lifting point.
• Rotates 360° & pivots 180°.
• Available with a long thread bolt.
• Designed for easy and smooth tilting in any operation.
• The lifting point will always be positioned correctly in the lift thanks to the tilting and rotating functions of the lifting point.
• Sold individually.
• Chains and Hook NOT included.
• Lifting Points with Long Thread are supplied with Nut and Washer.

Typical Applications

• Handling of tools for pressing, moulding and forging.
• 4-point lifting beam for lifting containers.
• Turning/lifting blades for wind turbines.
• Production and handling of turbomachinery.
• Handling of generators.
• Construction.
• Lashing and tie downs.

Dimensions and Specifications: Metric Thread

								Standard Length		Long Bolt					Standard Length
Part No.	WLL (t)*	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	L (mm)	L1 (mm)	L (mm)	M (mm)	X (mm)	Y (mm)	Z (mm)	Weight (kg)
DLP-M8 x 1.25	0.35	35	48	10	39	14	10	13	78	98	8	30	55	26	0.3
DLP -M10 x 1.5	0.65	35	48	10	39	14	10	13	78	98	10	30	55	26	0.3
DLP -M12 x 1.75	1	35	48	12	51	20	14	23	91	78	12	44	59	32	0.5
DLP-M16 x 2	1.8	35	48	12	51	20	14	23	91	78	16	44	59	32	0.5
DLP-M20 x 2.5	2.6	54	88	18	71	28	18	34	145	84	20	58	90	48	1.6
DLP-M24 x 3	4.1	54	88	18	71	28	18	34	145	84	24	58	90	48	1.7
DLP-M30 x 3.5	5	82	94	26	104	39	27	53	182	295	30	88	122	75	5
DLP-M36 x 4	7	82	94	26	104	39	27	53	182	295	36	88	122	75	5.2
DLP-M42 x 4.5	15	100	103	36	136	54	34	73	216	283	42	113	156	110	11.6
DLP-M48 x 5	20	100	103	36	136	54	34	73	216	283	48	113	156	110	11.9

*Safety factor 4:1

Dimensions and Specifications: Imperial Thread

								Standard Length		Long Bolt					Standard Length
Part No.	WLL (t)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	L (mm)	L1 (mm)	L (mm)	M (mm)	X (mm)	Y (mm)	Z (mm)	Weight (kg)
DLP-5/16”-18 UNC	0.35	35	48	10	39	14	10	13	78	98	30	55	26	5/16”	0.3
DLP-3/8”-16 UNC	0.6	35	48	10	39	14	10	13	78	98	30	55	26	3/8”	0.3
DLP-1/2”-13 UNC	1	35	48	12	51	20	14	23	91	78	44	59	32	1/2”	0.5
DLP-5/8”-11 UNC	1.6	35	48	12	51	20	14	23	91	78	44	59	32	5/8”	0.5
DLP-3/4”-10 UNC	2.2	54	88	18	71	28	18	34	145	84	58	90	48	3/4”	1.6
DLP-7/8”-9 UNC	2.6	54	88	18	71	28	18	34	145	84	58	90	48	7/8”	1.6
DLP-1”-8 UNC	4.1	54	88	18	71	28	18	34	145	84	58	90	48	1”	1.7
DLP- 1 1/4”-7 UNC	5	82	94	26	104	39	27	53	182	295	88	122	75	1 1/4”	5.5
DLP-1 1/2”-6 UNC	7	82	94	26	104	39	27	53	182	295	88	122	75	1 1/2”	5.7
DLP-1 3/4”-5 UNC	15	100	103	36	136	54	34	73	216	283	113	156	110	1 3/4”	11.7
DLP-2”- 4.5 UNC	20	100	103	36	136	54	34	73	216	283	113	156	110	2”	12.1

*Safety factor 4:1

DLP (De-centered Lifting Point) Load Chart WLL*

Symmetric Load (t)
No Of Legs.	1	2	2 Symmeric		3 & 4 Symmetric
Angle ß	0°< ß < 90°	0°< ß < 90°	0-45°	45-60°	0-45°	45-60°	Tightening torque	Spanner size
DLP -M8 x 1.25 DLP 5/16”-18 UNC	0.35 0.35	0.70 0.70	0.5 0.5	0.35 0.35	0.7 0.7	0.5 0.5	10 Nm 7 Ft.Lbs	13 mm 1/2”
DLP -M10 x 1.5 DLP 3/8”-16 UNC	0.65 0.60	1.30 1.20	0.9 0.8	0.65 0.60	1.4 1.3	1.0 1.0	15 Nm 11 Ft.Lbs	13 mm 1/2”
DLP -M12 x 1.75 DLP 1/2”-13 UNC	1.0 1.0	2.0 2.0	1.4 1.4	1.0 1.0	2.1 2.1	1.5 1.5	27 Nm 20 Ft.Lbs	24 mm 15/16”
DLP -M16 x 2 DLP 5/8”-11 UNC	1.8 1.6	3.6 3.2	2.5 2.2	1.8 1.6	3.7 3.3	2.7 2.4	60 Nm 44 Ft.Lbs	24 mm 15/16”
DLP -M20 x 2.5 DLP -3/4”-10 UNC DLP -7/8”-9 UNC	2.6 2.2 2.6	5.2 4.4 5.2	3.5 3.0 3.5	2.6 2.2 2.6	5.4 4.6 5.4	3.9 3.3 3.9	90 Nm 66 Ft.Lbs 66 Ft.Lbs	32 mm 1 5/16” 1 5/16”
DLP -M24 x 3 DLP -1”-8 UNC	4.1 4.1	8.2 8.2	5.7 5.7	4.1 4.1	8.6 8.6	6.1 6.1	135 Nm 100 Ft.Lbs	32 mm 1 5/16”
DLP -M30 x 3.5 DLP -1 1/4”-7 UNC	5.0 5.0	10.0 10.0	7.0 7.0	5.0 5.0	10.5 10.5	7.5 7.5	270 Nm 200 Ft.Lbs	55 mm 2 1/4”
DLP -M36 x 4 DLP -1 1/2”-6 UNC	7.0 7.0	14.0 14.0	9.8 9.8	7.0 7.0	14.7 14.7	10.5 10.5	320 Nm 236 Ft.Lbs	55 mm 2 1/4”
DLP -M42 x 4.5 DLP -1 3/4”-5 UNC	15.0 15.0	30.0 30.0	21.0 21.0	15.0 15.0	31.5 31.5	22.5 22.5	600 Nm 440 Ft.Lbs	75 mm 3”
DLP -M48 x 5 DLP -2”-4.5 UNC	20.0 20.0	40.0 40.0	28.0 28.0	20.0 20.0	42.0 42.0	30.0 30.0	800 Nm 590 Ft.Lbs	75 mm 3”

*Safety factor 4:1