Crosby IP10 & IP10J Vertical Plate Clamp with Fixed Hoisting Eye, WLL Range from 500kg to 30,000kg

The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed.

Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines

• IP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB).

• IP10J - Larger jaw opening.

• Available in capacities of 0.5 to 30 metric tons (Higher Working Load Limits are available upon request).
• Wide variety of jaw openings available: 0 to 155mm.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual and test certificate included with each clamp.
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Optional IP-5000 Stinger assembly available. Allows for easy connection between the  clamp and hoist hook.•For plate surface hardness till 279HV10, only 5% min. WLL is needed.
• Maintenance and repair kits are available.
• Manufactured by an ISO 9001 facility.
• All sizes are RFID EQUIPPED.
• Minimum WLL is 5% of maximum WLL for 0.5t IP10 only.
• Minimum WLL is 10% of maximum WLL for all other IP10, IP10J.
• Model IP10 available in 40t, 55t and 100t on request.

Metric Dimensions & Specifications

Model	Working Load Limit (t)*	IP10 Stock No.	Weight (kg)	Dimensions (mm)
				Jaw A	B	C	D	E	F	G	H	J	K
IP10	0.5	2701674	1.8	0 - 16	44	130	203	40	115	42	28	-	11
IP10	1	2701662	2.2	0 - 20	45	139	212	40	127	42	38	-	11
IP10	2	2701676	7.6	0 - 35	78	201	330	70	188	64	55	-	16
IP10	3	2701664	13.8	0 - 40	100	253	434	75	222	78	60	-	20
IP10	4.5	2701666	15.0	0 - 40	100	253	434	75	227	82	65	-	20
IP10	6	2701668	23.5	0 - 50	126	302	517	80	292	84	95	40	20
IP10	9	2701670	27.5	0 - 50	126	325	445	80	310	94	104	44	25
IP10	12	2701678	49	0 - 54	160	392	574	80	433	121	137	41	25
IP10	16	2701682	68	5 - 64	180	463	686	88	492	121	153	49	25
IP10	12	2701678	110.0	0 - 54	222	554	808	110	565	139	186	49	25
IP10	22.5	2701686	124.0	5 - 80	222	554	803	110	565	153	186	54	30
IP10	30	2701690	124	5 - 80	222	554	803	110	565	153	186	54	30
IP10J	0.5	2701646	1.8	15 - 30	45	128	209	40	128	41	32	-	11
IP10J	6	2701705	24.5	50 - 100	126	302	506	80	336	84	95	40	20
IP10J	9	2701672	28.5	50 - 100	126	325	542	80	360	94	105	44	25
IP10J	12	2701680	58	54 - 108	178	438	620	80	491	121	136	41	25
IP10J	16	2701684	80	64 - 128	208	521	734	88	562	121	160	45	25
IP10J	22	2701688	131.0	80 - 155	255	628	883	110	660	139	196	49	25
IP10J	30	2701692	147.0	50 - 155	255	628	887	110	660	153	196	54	30

* Design Factor based on EN 13155 and ASME B30.20.