Tine Mounted Fork Truck Jib Attachments

Forklift Truck Mounted Cross Beam Jib Lifting Attachment

Cross Beam Jib. Capacity 500kg/2000kg

Model: CBJ-602

Forklift Truck Tine Mounted Hydraulic Ram Operated Telescopic Extender Jib Attachment

Hydraulic Telescopic Jib. Arm Length 2000 to 3000mm. Capacity range options from 210kg to 1000kg.

Model: HTJ-606

This Deluxe Model of Fork Mounted Extender Jib is fitted with a hydraulic cylinder to enable the telescopic inner beam to be positioned with ease without the need for the forklift operator to leave his seat. The inner beam can also be positioned infinitely between 2000mm - 3000mm. Lifting points under the fix section of the beam run from 1000mm to 1750mm at 250mm increments. This Jib is provided with two hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load. This jib requires 1 double acting hydraulic service on the fork lift truck. Crane Jib also supplied without hoses.

Fixed Length Fork Tine Mounted Maxi Lift Jib Attachment with Adjustable Hook Position

Low Profile, Heavy-Duty Adjustable Forklift Truck Attachment with Capacity Options up to 9.2 tonnes.

Model: MLJ-607

Forklift Truck Tine Mounted Short Reach Telescopic Extender Jib Attachment With 2 Hooks

Twin Hook Telescopic Extender Jib. Range From 210kg to 3500kg

Model: TEJ-605

This Mini Extender Jib Retains all the functionality of the Fork Mounted Extender Jib Except the reach has been shortened. This allows manoeuvrability in confined spaces while still retaining a long extended reach. This Jib is provided with two hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load.

Forklift Truck Tine Mounted Manually Adjusted Telescopic Extender Jib Attachment

2m to 3m telescopic extender jib with secondary removable hook for fork trucks. Range from 210kg to 2700kg.

Model: TEJ-604

This fork mounted extender jib has all the features of the standard fork mounted jib but has the added functionality of a telescopic inner beam that allows for longer loads to be handled. The increased reach also allows loads to be lifted from otherwise inaccessible locations. This Jib is provided with two swivel hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load.

Fork Tine Mounted Articulating Telescopic Extender Jib wiith 45 Degree vertical Articulation

Articulating Telescopic Jib for Forklift Trucks. Range From 230kg to 4000kg

Model: ATJ-608

This Articulating Jib has been specially designed to handle loads at varying heights. The telescopic inner beam has a reach of 2500mm Closed and 3000mm Extended. The special Frame assembly allows the beam to be angled to a maximum of 45 degrees at 15mm increments. This attachment is ideal for use on building sites lifting roof trusses.

Fixed Length Forklift Truck Mounted Jib

Raised Height Fork Mounted Jib. Range From 200kg to 5000kg

Model: FMJ-601

This is a fixed length crane jib which mounts onto the forks of any truck. The ideal attachment for lifting and conveying loads which are not suitable for, or do not require palletising. Supplied C/W hook and shackle which can be moved to any suitable lifting position.

Forklift Truck Mounted Tele-Liner Jib Attachment

Adjustable Fork Truck Telescopic Jib Tine Attachment. Range From 210kg to 4400kg

Model: TJ-603

Low Liner Jibs are ideal for handling un-palletised long loads such as scaffolding poles & bundles of wood. Mounting the beam in between the fork pockets lowers the weight and cost of the jib as well as giving it the added functionality of being low profile and therefore allowing access to confined areas. Models are available to suit trucks up to 5000Kg capacity. Fork pockets allow easy fitment to the forklift forks. Heel fixing retention gives positive locking onto the fork blades.

Fork Truck Mounted Low Liner Lifting Jib Attachment

Low Liner Jib for mounting directly to a forklift trucks tines. Range from 230kg to 4400kg

Model: LLJ-600

Low Liner Jibs are ideal for handling un-palletised long loads such as scaffolding poles & bundles of wood. Mounting the beam in between the fork pockets lowers the weight and cost of the jib as well as giving it the added functionality of being low profile and therefore allowing access to confined areas. Models are available to suit trucks up to 5000Kg capacity.