Most Recently Updated Products
Below is a list of some of the most recent products and information which have been updated on liftingsafety.
RUD VLBSU Weld On Load Rings with Spring
Weldable swivel lifting eye/point with 180° pivoting movement. Spring-loaded design provides resistance, allowing the eye to remain securely in position when not in use. WLL Range from 1.5t to 16t
RUD VLBS Weld On Load Rings without Spring
Weldable swivel lifting eye/point with 180° pivoting movement. Designed without a spring, allowing the eye to hang freely with minimal resistance. WLL Range from 1.5 to 16t
The load ring, ready for welding, VLBS / LBS is prepared for the direct welding at the transport goods. The welding block (made of easy weldable material 1.0577+N St. 52-3) has been provided with distance nabs as gap indication for the weld and stamped with the WLL identification number. The load bracket can be tilted by 180°, made of high-tensile material, 100% crack detected and thus overall loadable. By a protected spring, the suspension bracket can be maintained in every position; the parts are connected with each other in an unloosable way.
Crosby G2130 & G2130OC Bolt Type Bow Lifting Shackles
Crosby bolt type anchor shackles (omega shackles) with nut & split pin for added safety. WLL Range from 330kg to 150 tonne
Crosby HG228 Jaw & Jaw Turnbuckles Certified for Lifting Applications, WLL Range from 230kg to 34,000kg
Crosby HG228 Jaw & Jaw Turnbuckles for Lifting, Holding And Tensioning
Yale Quick Fit Beam Trolley with Track Clamp. Locking beam Trolley, Push or Chain Drive
Yale braked beam trolleys fitted with a manual brake (Track Clamp) available as push travel or geared travel (chain drive). Range from 500kg to 5000kg
The locking beam trolley incorporates a threaded locking pin connected to a chain wheel. A loop of hand 'pull chain' wraps over the chain wheel and down to the operator below. Pulling the hand chain turns the threaded locking pin. Pull the chain clockwise to lock the pin against the steel beam (put the brake on), turning anticlockwise releases the pin (takes off the brake).
When the trolley is fitted to the beam the user adjusts the 'Take-up screws' to approx 1mm from the underside of the lifting beam. When the locking pin is tightened the 'Take-up' pins will be forced to clamp against the underside of beam, resulting in a three point clamp.
Yale VSIII (VS3) Manual Chain Block
Yale's entry level (medium duty) hook suspended manual chain hoist, which supersedes the VS Plus. 250kg to 50 tonne.
Capacity options available are: 250kg, 500kg, 1t, 2t, 3t, 5t, 10t, 20t, 30t & 50t,
The Yale VSIII (VS 3) hand chain hoist (chain block) is an innovative further development introduced by Yale. The improved hand chain guide prevents tilting or jamming of the hoist's hand chain, leading to a smooth running of the chain.
High-quality bearings on hoist side plates, gearbox and load chain sheave ensure smooth operation of load chain and drive pinion. Optimised hand forces set standards for easy operation
Gunnebo Classic UKN Weld-On Hooks, Range from 750kg to 15,000kg
Gunnebo Classic Series, Grade 8 weld on hook with curved welding plate
Gunnebo UKN Weld-On Hook Range From 750kg to 15,000kg, With Curved Welding Plate
Fall Safe Stainless Steel Rotating Fall Arrest Anchor
Stainless steel EN795 rotative fall arrest anchor point, designed for single person use and is suitable for both indoor and outdoor applications
Fall Safe FS233 TUFF PU Coated Safety Harness
Two point fall arrest safety harness made from PU coated webbing that is ideal for dirty, oily or sewage environments because it can be wiped clean easily.
Fall Safe FS201KEV Kevlar Welders Harness
Two point fall arrest safety harness made from kevlar webbing that is designed specifically for use by a welder carrying out hot works.
Fall Safe FS502KEV-AB-2M Twin Leg Kevlar Fall Arrest Lanyard
Two leg lanyard with shock absorber for fall arrest applications, made from kevlar webbing that is designed specifically for use by a welder carrying out hot works. 2 metre working length.
Fall Safe FS249 ATEX Fall Arrest Harness
Two point fall arrest safety harness made from anti-static webbing that is designed specifically for use in potentially explosive atmospheres.
Fall Safe FS502ATEX Twin Leg ATEX Fall Arrest Lanyard
Two leg lanyard with shock absorber for fall arrest applications, made from anti-static webbing that is designed specifically for use in ATEX rated potentially explosive atmospheres. 2 metre working length.
Fallsafe FS237 Rescue Vertical Harness for Confined Space Work
Safety harness designed specifically for rescue in confined spaces. Top rescue attachment can also be used for fall arrest us with overhead anchorage points or systems.
Ronin Titan Lift (TL) Battery Powered Ascender
Lightweight, portable, rugged and durable powered rope ascender with hands freel brake. 181kg safe working load.
Fall Safe FS930E Orblox 2.3m Sharp Edge Fall Arrest Block
Retractable fall arrest blocks made of stainless steel and carbon steel with high strength 19mm UHMWPE webbing and tested for use on sharp edges.
Crosby G2130CT & G2140CT Cold-Tuff Anchor Bow Lifting Shackle with Nut & Split Pin
Crosby Cold-Tuff bow shackles, for use in extreme cold weather environments as low as -50°F (-45°C). WLL Range from 4750kg to 250 tonne.
Crosby G2160 & S2160 Wide Body Bolt Type Lifting Bow Shackles with Nut
Crosby wide body shackles with larger bearing area to increase wire sling longevity and removes the need for thimbles on ropes. WLL range from 7 to 1550 tonnes.
Crosby G2140 Alloy Anchor Bow Lifting Shackles with Bolt, Nut & Split Pin
Crosby alloy steel bolt type safety shackles, available with a lifting WLL from 2,000kg up to 400 tonne.
Features: Forged Alloy Steel 2 thru 200 metric tons. Cast Alloy Steel 250 thru 400 metric tons. Working Load Limit is permanently shown on every shackle. All sizes are individually proof tested to 2.0 times the Working Load Limit. Pins are galvanized and painted red.
Certification must be requested at time of order. Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 C.
Crosby G209A Alloy Screw Pin Lifting Shackles
Crosby alloy steel screw pin bow shackles. Lifting WLL range from 2000kg to 21 tonnes.
110v or 240v Scaffold Hoist
Wire rope builders hoist designed for lifting applications on construction sites. Capacity options of 80, 160, 230 or 300 kg, with lifting heights up to 30 metres.
Crosby G210 Screw Pin Chain Lifting D Shackles
Crosby Galvanised Screw Pin Chain Shackles. WLL Range from 330kg to 55t.
Crosby W4167 Wirelock Swaging Compound
Wire Rope Swaging Resin for Spelter Sockets. Range from 100cc to 2000cc.
Crosby S319SWG Shank Hooks for Swaging
Crosby Swage Shank Hooks Fixing Directly to Wire Rope. WLL Range from 400kg to 14 tonnes.
The Crosby S-319 swaging shank hook utilizes standard Crosby 319N shank hooks with interlocking hook tip. Each hook has a pre-drilled cam which can be equipped with a latch. They have a black oxide finish on body (Shank is uncoated). Wide range of sizes available. Working Load Limit: 0.4-14 tons. Wire Rope sizes: 3/16" thru 1-1/8". Swage shank hook terminations have an efficiency rating of 95%. Quenched and Tempered. Heat treat process allows for ease of swaging.
Crosby S506 National Swage Duplex Sleeves
National Swage COLD TUFF Duplex Non-Tapered Swaging Sleeves. Size Range from 8mm to 32mm Rope Diameter
Crosby S409 COLD TUFF Swage Buttons
Crosby COLD TUFF Swage Buttons with Size Range Options from 3mm to 32mm Rope Diameter
Crosby S502 Closed Swage Socket
Crosby Wire Rope Swage Sockets with Closed End to suit 6mm to 52mm Rope Diameters.
Crosby S501 Open Swage Socket
Crosby Open Swaging Sockets with Removable Load Pin to suit Wire Ropes from 6mm to 52mm diameter.
Crosby S505 National Steel Swaging Sleeves
Crosby National Steel Swaging Sleeves to suit wire ropes from 6mm to 114mm.
Crosby G417 & S417 Closed Spelter Sockets
Crosby Closed Spelter Sockets. Ultimate Load Range Options from 4.5 to 1005 tonnes To Suit Wire Ropes Upto 102mm.
Weldable swivel lifting eye/point with 180° pivoting movement. Spring-loaded design provides resistance, allowing the eye to remain securely in position when not in use. WLL Range from 1.5t to 16t
Weldable swivel lifting eye/point with 180° pivoting movement. Designed without a spring, allowing the eye to hang freely with minimal resistance. WLL Range from 1.5 to 16t
Crosby bolt type anchor shackles (omega shackles) with nut & split pin for added safety. WLL Range from 330kg to 150 tonne
Crosby HG228 Jaw & Jaw Turnbuckles for Lifting, Holding And Tensioning
Yale braked beam trolleys fitted with a manual brake (Track Clamp) available as push travel or geared travel (chain drive). Range from 500kg to 5000kg
Yale's entry level (medium duty) hook suspended manual chain hoist, which supersedes the VS Plus. 250kg to 50 tonne.
Gunnebo Classic Series, Grade 8 weld on hook with curved welding plate
Stainless steel EN795 rotative fall arrest anchor point, designed for single person use and is suitable for both indoor and outdoor applications
Two point fall arrest safety harness made from PU coated webbing that is ideal for dirty, oily or sewage environments because it can be wiped clean easily.
Two point fall arrest safety harness made from kevlar webbing that is designed specifically for use by a welder carrying out hot works.
Two leg lanyard with shock absorber for fall arrest applications, made from kevlar webbing that is designed specifically for use by a welder carrying out hot works. 2 metre working length.
Two point fall arrest safety harness made from anti-static webbing that is designed specifically for use in potentially explosive atmospheres.
Two leg lanyard with shock absorber for fall arrest applications, made from anti-static webbing that is designed specifically for use in ATEX rated potentially explosive atmospheres. 2 metre working length.
Safety harness designed specifically for rescue in confined spaces. Top rescue attachment can also be used for fall arrest us with overhead anchorage points or systems.
Lightweight, portable, rugged and durable powered rope ascender with hands freel brake. 181kg safe working load.
Retractable fall arrest blocks made of stainless steel and carbon steel with high strength 19mm UHMWPE webbing and tested for use on sharp edges.
Crosby Cold-Tuff bow shackles, for use in extreme cold weather environments as low as -50°F (-45°C). WLL Range from 4750kg to 250 tonne.
Crosby wide body shackles with larger bearing area to increase wire sling longevity and removes the need for thimbles on ropes. WLL range from 7 to 1550 tonnes.
Crosby alloy steel bolt type safety shackles, available with a lifting WLL from 2,000kg up to 400 tonne.
Crosby alloy steel screw pin bow shackles. Lifting WLL range from 2000kg to 21 tonnes.
Wire rope builders hoist designed for lifting applications on construction sites. Capacity options of 80, 160, 230 or 300 kg, with lifting heights up to 30 metres.
Crosby Galvanised Screw Pin Chain Shackles. WLL Range from 330kg to 55t.
Wire Rope Swaging Resin for Spelter Sockets. Range from 100cc to 2000cc.
Crosby Swage Shank Hooks Fixing Directly to Wire Rope. WLL Range from 400kg to 14 tonnes.
National Swage COLD TUFF Duplex Non-Tapered Swaging Sleeves. Size Range from 8mm to 32mm Rope Diameter
Crosby COLD TUFF Swage Buttons with Size Range Options from 3mm to 32mm Rope Diameter
Crosby Wire Rope Swage Sockets with Closed End to suit 6mm to 52mm Rope Diameters.
Crosby Open Swaging Sockets with Removable Load Pin to suit Wire Ropes from 6mm to 52mm diameter.
Crosby National Steel Swaging Sleeves to suit wire ropes from 6mm to 114mm.
Crosby Closed Spelter Sockets. Ultimate Load Range Options from 4.5 to 1005 tonnes To Suit Wire Ropes Upto 102mm.