UK manufactured heavy-duty plate lifting clamps with hinge for angled lifts from horizontal to vertical or vice-versa. Capacity options from 1.5 to 10 tonnes, to suit plates up to 100mm thick.
Model:
Camlok CX
Quick Ref:
VPLC-339
More from:
CX Series Heavy-Duty Plate Clamp with Hinge
1500kg to 10,000kg options available.
Used for all structural steel plates up to 300 Brinell / 32 Rockwell C.
Handling of plates at any angle.
Lifts a single plate from the horizontal to the vertical and vice versa.
Vertically racked plates can be turned over.
Can be used on edge and side loads.
Can be lifted with a reduction in the W.L.L.
Designed and manufactured in the UK.
Clamp Information
The Camlok Series CX range of clamps has been developed especially for the handling of plates at any angle, thus permitting the lifting and handling of awkwardly shaped plates and fabrications. Single plates can be lifted from the horizontal to the vertical position and vice versa.
Vertically racked plates can be turned over due to the in-built lifting eye and link. Standard CX clamps are fitted with a cam-operated closing mechanism that can, if preferred, be replaced with a chain pull open /close mechanism. Clamps are fitted with hardened serrated teeth, jaws and pads that are suitable for gripping a steel plate up to a hardness of 300 Brinell.
Side lifting
Applications
The Camlok CX series of plate lifting clamps can be used for all structural steel plates up to a surface hardness of 300 Brinell. It has been designed especially for the handling of plates at any angle, thus permitting the lifting and handling of awkwardly shaped plates and fabrications. Single plates can be lifted from the horizontal to the vertical position and vice versa. Vertically racked plates can be turned over due to the in-built lifting eye and link.
2 clamps and a sling
Series CX Chainlock
Options
The standard CX clamps are fitted with a cam-operated closing mechanism that can, if preferred, be replaced with a chain pull open /close mechanism. They can be supplied with narrow or large throat capacity and with a swivel or an insulated swivel system, which allows welding to be undertaken whilst the material is still attached to the crane.
Cam-Lock
Dimensions & Specifications
MODEL
WLL kg (Per Clamp)
Plate mm Z
Weight kg (Per Clamp)
A
B
C
D
E
F
G
H
CX1500
150kg - 1.5 tonne
0 - 20
7
140
399
63
48
70
83
12,5
63
CX3000
300kg - 3 tonne
0 - 32
12
197
515
67
68
93
110
19
67
CX3000L
300kg - 3 tonnes
30 - 60
15
227
515
67
68
93
110
19
67
CX6000
600kg - 6 tonne
0 - 50
38
292
737
95
95
143
188
28
95
CX6000L
600kg - 6 tonnes
50 - 100
48
342
785
98
115
143
188
28
98
CX8000
800kg - 8 tonne
0 - 50
39
292
737
98
95
143
210
28
98
CX8000L
800kg - 8 tonnes
50 - 100
51
342
785
98
115
143
210
28
98
CX10000
100kg - 10 tonne
0 - 50
61
360
903
110
125
162
223
33
110
CX10000L
100kg - 10 tonnes
50 - 100
76
410
921
112
168
162
223
33
112
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Camlok CX Heavy Duty Hinged Plate Clamp
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
CX Series Heavy-Duty Plate Clamp with Hinge
1500kg to 10,000kg options available.
Used for all structural steel plates up to 300 Brinell / 32 Rockwell C.
Handling of plates at any angle.
Lifts a single plate from the horizontal to the vertical and vice versa.
Vertically racked plates can be turned over.
Can be used on edge and side loads.
Can be lifted with a reduction in the W.L.L.
Designed and manufactured in the UK.
Clamp Information
The Camlok Series CX range of clamps has been developed especially for the handling of plates at any angle, thus permitting the lifting and handling of awkwardly shaped plates and fabrications. Single plates can be lifted from the horizontal to the vertical position and vice versa.
Vertically racked plates can be turned over due to the in-built lifting eye and link. Standard CX clamps are fitted with a cam-operated closing mechanism that can, if preferred, be replaced with a chain pull open /close mechanism. Clamps are fitted with hardened serrated teeth, jaws and pads that are suitable for gripping a steel plate up to a hardness of 300 Brinell.
Side lifting
Applications
The Camlok CX series of plate lifting clamps can be used for all structural steel plates up to a surface hardness of 300 Brinell. It has been designed especially for the handling of plates at any angle, thus permitting the lifting and handling of awkwardly shaped plates and fabrications. Single plates can be lifted from the horizontal to the vertical position and vice versa. Vertically racked plates can be turned over due to the in-built lifting eye and link.
2 clamps and a sling
Series CX Chainlock
Options
The standard CX clamps are fitted with a cam-operated closing mechanism that can, if preferred, be replaced with a chain pull open /close mechanism. They can be supplied with narrow or large throat capacity and with a swivel or an insulated swivel system, which allows welding to be undertaken whilst the material is still attached to the crane.
Cam-Lock
Dimensions & Specifications
MODEL
WLL kg (Per Clamp)
Plate mm Z
Weight kg (Per Clamp)
A
B
C
D
E
F
G
H
CX1500
150kg - 1.5 tonne
0 - 20
7
140
399
63
48
70
83
12,5
63
CX3000
300kg - 3 tonne
0 - 32
12
197
515
67
68
93
110
19
67
CX3000L
300kg - 3 tonnes
30 - 60
15
227
515
67
68
93
110
19
67
CX6000
600kg - 6 tonne
0 - 50
38
292
737
95
95
143
188
28
95
CX6000L
600kg - 6 tonnes
50 - 100
48
342
785
98
115
143
188
28
98
CX8000
800kg - 8 tonne
0 - 50
39
292
737
98
95
143
210
28
98
CX8000L
800kg - 8 tonnes
50 - 100
51
342
785
98
115
143
210
28
98
CX10000
100kg - 10 tonne
0 - 50
61
360
903
110
125
162
223
33
110
CX10000L
100kg - 10 tonnes
50 - 100
76
410
921
112
168
162
223
33
112
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Camlok CX Heavy Duty Hinged Plate Clamp
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
