Limited time offer, free delivery on all online orders!
Best Price Guarantee - Challenge us to beat any like for like quote. Online orders are possible to UK Mainland only, but we export globally.
LIFTINGSAFETY
  1. Home/
  2. Lifting Equipment/
  3. Specialist Lifting Equipment/
  4. Wind Turbine Lifting Equipment, Wire Rope Hoists & Chain Hoists /
  5. Verlinde VLA Wind Turbine Electric Chain Hoist
Verlinde VLA Wind Turbine Electric Chain Hoist

Verlinde VLA Wind Turbine Electric Chain Hoist

High-speed electric hoists suitable for use with power supply's up to 690v for use on wind turbines. 160kg to 1 tonne.

Model: 

WTCH-2626

Verlinde VLA Wind Turbine Electric Chain Hoist

More from:
Verlinde

Low Maintenance and Compact size

Hoist Type Capacity FEM Group (Duty Cycle) Height of lift (m) Lifting speed (m/min)
VLA 5 1624 b1 160kg 1 Bm 16 to 80m 24 and 6 m/min
VLA 5 2516 b1 250kg 1 Bm 16 to 80m 16 and 4 m/min
VLA 10 3232 b1 320kg 1 Bm 16 to 80m 32 and 8 m/min
VLA 10 5016 b1 500kg 1 Bm 16 to 80m 16 and 4 m/min
VLA 16 1016 b1 1000kg 1 Bm 16 to 80m 16 and 4 m/min

Wind turbine chain hoist Usage exampleOperating Data

  • Load capacity: 160kg, 250kg, 320kg, 500kg or 1000kg
  • Wide range of lifting speeds:16 and 4 m/min, 24 & 6 m/min and 32 & 8 m/min
  • Lifting height: up to 80 meters
  • FEM group* for operation: 1 Bm
  • Power supply: Wide range of power supply up to 690 V

Lifting safety devices

  • Lifting: Friction torque limiter
  • Upper and lower electric limit switches
  • Hook: Upper hook (detachable) and lower hook complies to DIN standard
  • Motor: Thermal protection
  • Brake system: DC electro-magnetic disk brake made to last as long as the hoist itself.

Lifting motor

  • Operation: 40 % ED
  • Protection: IP 55
  • Insulation class: F
  • Safety devices: Thermal protection of the motor

Reducer - Body of hoist

  • Lubrication: Grease
  • Speed ratio: 1/4
  • Body of hoist: injection molded aluminum
  • Surface treatment: 80-micron epoxy paint

Control devices

  • Low-voltage control: 48 Volts
  • Interface: Standard handling type button box (2 lifting speeds and emergency “punch” stop)
  • Length of control cable: 3 meters
  • Insulation class: IP 65

Lifting chain

  • Type: EN 818 - 800 N/mm2
  • Safety: safety coeffi cient 5
  • Manufactured: especially for VERLINDE
  • Treatment: electro-galvanized
  • Storage: detachable 900-denier fabric chain tray, set of small chain and snap-hooks to hold the tray against the structure

Environmental data

  • Working temperature required: -20°C to +40°C
  • Protection class: IP55 as standard
  • Side pull angle: 3 degrees maximum*
  • Noise level: 70 decibels

Maintenance

  • Reducer: life lubricated
  • Brake clutch system: DC electro-magnetic disk brake made to last as long as the hoist itself.
  • *According to FEM regulation.

Pricing

Unit Price Request Quote
Description

Low Maintenance and Compact size

Hoist Type Capacity FEM Group (Duty Cycle) Height of lift (m) Lifting speed (m/min)
VLA 5 1624 b1 160kg 1 Bm 16 to 80m 24 and 6 m/min
VLA 5 2516 b1 250kg 1 Bm 16 to 80m 16 and 4 m/min
VLA 10 3232 b1 320kg 1 Bm 16 to 80m 32 and 8 m/min
VLA 10 5016 b1 500kg 1 Bm 16 to 80m 16 and 4 m/min
VLA 16 1016 b1 1000kg 1 Bm 16 to 80m 16 and 4 m/min

Wind turbine chain hoist Usage exampleOperating Data

  • Load capacity: 160kg, 250kg, 320kg, 500kg or 1000kg
  • Wide range of lifting speeds:16 and 4 m/min, 24 & 6 m/min and 32 & 8 m/min
  • Lifting height: up to 80 meters
  • FEM group* for operation: 1 Bm
  • Power supply: Wide range of power supply up to 690 V

Lifting safety devices

  • Lifting: Friction torque limiter
  • Upper and lower electric limit switches
  • Hook: Upper hook (detachable) and lower hook complies to DIN standard
  • Motor: Thermal protection
  • Brake system: DC electro-magnetic disk brake made to last as long as the hoist itself.

Lifting motor

  • Operation: 40 % ED
  • Protection: IP 55
  • Insulation class: F
  • Safety devices: Thermal protection of the motor

Reducer - Body of hoist

  • Lubrication: Grease
  • Speed ratio: 1/4
  • Body of hoist: injection molded aluminum
  • Surface treatment: 80-micron epoxy paint

Control devices

  • Low-voltage control: 48 Volts
  • Interface: Standard handling type button box (2 lifting speeds and emergency “punch” stop)
  • Length of control cable: 3 meters
  • Insulation class: IP 65

Lifting chain

  • Type: EN 818 - 800 N/mm2
  • Safety: safety coeffi cient 5
  • Manufactured: especially for VERLINDE
  • Treatment: electro-galvanized
  • Storage: detachable 900-denier fabric chain tray, set of small chain and snap-hooks to hold the tray against the structure

Environmental data

  • Working temperature required: -20°C to +40°C
  • Protection class: IP55 as standard
  • Side pull angle: 3 degrees maximum*
  • Noise level: 70 decibels

Maintenance

  • Reducer: life lubricated
  • Brake clutch system: DC electro-magnetic disk brake made to last as long as the hoist itself.
  • *According to FEM regulation.

You May Also Like

Double hook electric chain hoist with hook suspension or electric travelling beam trolley. 250kg to 5 tonne.
Kito TWER2 Twin Hook Electric Chain Hoist
Request Quote
3 phase variable lifting speed stepless electric hoist in capacities from 0.5 to 7.5 tonne.
Verlinde VL Variable Speed Electric Chain Hoist
Request Quote
400v 3ph 50hz electric hoists with a wide variety of options such as extra low headroom and atex certification, in capacities from 125kg up to 5 tonne.
Stahl ST Electric Chain Hoist
Was £1,513.00
Now £1,240.66
230v 1ph 50Hz electric chain hoist available in single or dual speed in capacities from 60kg up to 480kg.
Kito ED Lightweight Single Phase Electric Chain Hoist
Request Quote
Easy to use, compact and lightweight electric hoist with built-in geared travel trolley, available from 125kg to 2 tonne.
Hadef 62/05H Electric Chain Hoist with Geared Beam Trolley
Request Quote
Compact design electric hoist with built in manual push travel trolley. Overload Protection included as standard. Atex Option Available. Capacity range from 250kg to 30 tonne.
Hadef 66/04 AKR Electric Chain Hoist with Push Beam Trolley
Request Quote
Contact Us About This Product

Recently Viewed Products

Beam clamp incorporating a stationary height stabilizer block. 3000kg or 4000kg

Riley Superclamp Adjustable Double Ended Monorail Construction Clamp

Was £457.60
Now £421.00
Hacketts offshore/underwater manual chain block with quad pawls (QP) for finer adjustment and increased safety. 0.5t to 50t.

William Hackett "WH SS C4 QP" Subsea Hand Chain Hoist

Was £284.69
Now £224.91
High-speed electric hoists suitable for use with power supply's up to 690v for use on wind turbines. 160kg to 1 tonne.

Verlinde VLA Wind Turbine Electric Chain Hoist

Request Quote
For use in TV studios, Music & Sports Arenas, Places of Worship, Production Rigging, Multi-purpose Venues & Theatres

GIS "LP D8+" Entertainment Electric Chain Hoists, for General Rigging Purposes to D8+ Guidelines, Range 125kg to 1000kg

Request Quote

LiftingSafety uses cookies to improve your user experience.

Find out more