Search Results for "camlok"- 46 items found

Camlok Single Arm Block Grab for stone, concrete blocks and kerb stones etc.

This grab is fitted with a lock to secure the spring-loaded arm. The large handle makes it easy to carry by hand. It can be designed for any working load limit and with jaw width capacity to suit customer requirements. It is fitted with plastic pads for efficient grip and to prevent damage to the load. Designed for picking up kerbstones, blocks etc.

Camlok Lightweight I Profile Steel Grab.

This clamp is useful for various flange widths due to large jaw capacity. The clamping jaws hold the load firmly in place. Designed to transport girders, profile steel etc.

Models available: 500, 1500, 3000 kg

Camlok Round Stock Grabs, for Lifting Tubes, Pipes, Rolls or Similar Stock up to 600mm Dia.

Camlok Scissor Block Grab with Rubber Pads or Teeth with Manual Latching Mechanism.

Camlok Adjustable 'Jaw' Horizontal Plate Lifting Clamps (Sold in Pairs).

The Camlok Adjustable Height Horizontal Plate Clamp is designed to lift and transport thick plate and plate bundles in the horizontal position. The clamps are used in pairs for short lengths of plate. For longer plate lengths 2 pairs of clamps suspended from a lifting beam are used. The height of the jaw pivot arm is easily adjusted via a spring locked rack and lock bar device. The clamping jaw is always positively brought into the correct position ensuring a safe and secure lift.

Camlok Horizontal Plate Lifting Clamp. Sold in Pairs. Available with a Smooth Jaw or Serrated (teeth) Jaw on all models.

The CH/HH Series of plate clamps are sold in pairs. Optional plate thicknesses for wider plates. Used with a 2 leg sling upto 90º on all types of plate. The integral shackle is designed to accept, directly, the relevant sized chain sling hook.

 

 

Camlok Hinged Vertical Plate Lifting Clamp.

The CY Non-welded Hinged Universal Clamp is a variant of our successful CZ92 Series Clamp. The clamp has all the innovative design features of the CZ92 clamp and incorporates a hinged hook ring. This device enables the clamp to be used at any angle thus permitting awkward lifts previously considered hazardous. The standard clamp is fitted with a cam operated locking mechanism but this can be replaced (at no additional cost) by a chain pull locking mechanism. The CY range is fitted with hardened steel pads and jaws that incorporate tooth wear indicators. The clamp is designed to lift and handle plate with a surface hardness up to 300 Brinell. Contact our sales/technical department if plate to be lifted has a higher surface hardness. Other clamps in our range are available for this application.

Best Seller! Camlok Standard Vertical Plate Lifting Clamp. Standard plate clamps with safety lock.

Used on all hot rolled structural steel plates and sections upto a surface hardness of 300 Brinell/32 Rockwell C. Lifts plate from the horizontal to the vertical position and vice versa through 180. Fitted with hold-open and lock-closed device (not 92500).

Available to suit additional plate thicknesses

Camlok Heavy Duty Vertical Plate Lifting Clamp.

The Camlok CZ Series Vertical Plate Clamp differs from our CZ92 series in that the body of the clamp is a welded construction. The series has a lifting capacity range of 1 to 30 tons. The CZ series clamp can be used to lift plate from the horizontal to vertical position and vice versa. This clamp series is suitable for handling steel plate with a surface hardness of up to 300 Brinell. The standard clamp is fitted with a hook ring this can be replaced with a short length of chain and master link. The clamp can be supplied with alternative body shapes, Clamp jaws and pads are manufactured from high tensile steel and have heat treated serrated teeth.

Camlok Twin Jaw plate lifting clamp, specially designed for lifting steel plates.

The Twin Jaw Range of Clamps from Camlok have been designed specifically for lifting steel plates. The main difference between these and the single jaw clamps is that the TJC has a unique twin moving jaw arrangement. This Design means the TJC can be used in applications where a larger jaw capacity is required, with a low minimum weight.

Non-Marking Plate Clamp.

The LJ range of clamps is specifically designed to lift plates without marking or damaging the surface finish. The clamp is suitable for lifting various types of plate materials. eg. - steel, timber etc. The clamp is particularly suitable for lifting thin gauge steel plate, aluminium and stainless steel. The clamp is also suitable for steel with a surface hardness above 300 Brinell.

Options on Camlok Non marking clamp - 500kg/plate diameter 0 - 10mm, 1500kg/plate diameter 0 - 20mm.

Camlok steel drum vertical lifting clamps for top lifting. DA is crane slung only. DAF is crane slung or forklift truck tine mountable.

 

 

Camlok hook suspended rim grip drum grab for steel drums. (Chain sling not Included)

Camlok MRC series multi rail clamp for the handling of 3 to 8 rails. Camlok MRC Rail Grabs have been designed for the quick and simple bulk handling of ALL rail sections. The features of the MRC are similar to those of the MR, but this unit has the benefit of having interchangeable modular designed comb sections. Various Combs to suit specific rail sections may be combined with the same scissor mechanism. Alternative comb sections are to be requested on order.

An additional feature of the MRC is that it is possible to fit the grab with an automatic opening/closing device that automatically engages the rail when lifted from its resting position on top of the rails.

Multi Rail lifting grabs for handling from 3 to 8 rails (various size options). Recommended for use in pairs.

Camlok Multi Rail Clamps are used for the fast bulk handling of a specific rail section. The section are locked into place with swivelling feet which locate under the rail-heads and top clamp body, that rotate, pressing a hard rubber lined beam onto the top of the rail head. The rubber lined contact beam prevents damage and marking to the rail heads. It is recommended that you use a pair of these clamps, at centres of 50 to 60% of rail length for rails of up to 20m long. For rails above 20m, three clamps at centre distance 65 to 75% of rail length must be used.

Camlok Non-Marking Board Clamp for Lifting Boards Between 5 & 150mm (various size options).

This clamp facilitates the lifting and handling of all materials. Loads can be lifted from the vertical to the horizontal through 90 degrees for transportation. It is fitted with a handle to enable the operator to guide the load during transport. Fitted with large rubber pads to prevent damage. Ideal clamp for use in production facilities and on construction / building sites.

Cruciform Spreader Beam for Lifting Big Bags, Bulk Bags, FIBC's (Flexible Intermediate Bulk Containers) or Large Totes Excellent quality, made in Chester UK and available as 1 tonne or 2 tonne SWL in a choice of sizes to suit most applications. Contact us for other sizes and capacities as we will manufacture Big Bag lifting beams to your specification!

UK manufactured coil handling hooks, built to meet your requirements.

The Camlok TCK is designed for lifting and handling pipe sections, coils, rolls and rings etc. in the horizontal position. If collared pipes are to be lifted adjust the balance accordingly. Never try lift a load longer than the length and Mac working load specified.

Camlok TCK coil handler C-hook are available in the following standard capacities - 500kg, 1000kg, 2000kg, 3000kg, 5000kg, 7500kg, 10,000kg.Other and higher capacities are available on request.

Top Container Lifting Eyes (set x4).

Steel Shear-leg / Tripod with a variety of feet options to suit most working environments.