Fork Mounted Man Riding Baskets

This fantastic value platform is based on our popular single person WP-SP design, however with a platform size large enough to accommodate two people. Economy model as mass produced, not a reflection of the quality. With a slide up front bar for entry, 500kg SWL, this platform is manufactured and supplied to comply fully with the latest PM28 Health & Safety Regulations. Suitable for use with forks up to 150mm wide x 50mm thick.

Fork Mounted Fixed Back Man Riding Access Platform is a safer alternative to ladders at a lower cost than scaffolding. Harness rails fitted as standard, with positive locking to forks. Where gates are fitted, gate locks operate automatically when platform is raised. Available with 4 different gate positions: front, left side, lift up front bar and step through bars.

Fork Mounted Hinged Back Access Basket comes with harness rails fitted as standard on all cages, fold down back to ease storage and transport. Available with 4 different gate positions: front, left Gate, lift up bar and step through bars.

Fork Mounted Fold Away Access Platform offers all the benefits of the standard man-riding baskets but can be easily disassembled for ease of transport and storage. Assembly of the forklift platform takes less than 30 seconds. It’s available as either a 1 or 2 person platform, takes only the space of a small packing case when folded, is light and easy to assemble (no tools required), easily transported from site to site, castors incorporated to ease manoeuvrability, the platform locks securely onto your fork lift truck forks, it’s totally safe and secure when in use and has a solid chequer plate floor with drainage holes.

Fork Mounted Ultimate Access Man-Riding Platform comes with a tool tray, clip-board and a strip light bulb holder. With auto-locking and unlocking to the truck and safety harness. One side positioned gate with a platform size of 1000 x 1200mm.

Fork Mounted Raised Access Man-Riding Platform is raised up on legs to give extended height for accessing high racking, roof lights, buzz bars etc. where truck lift height is limited. Available with 2 different raised heights of 500mm and 100mm, with different entry gates: lift up front bar, through bars, front gate and left side gate.

Fork Mounted Pedestrian Man-Riding Stacker Platform is designed for use with pedestrian stackers with large section "wrap-over" forks and stabiliser legs. These platforms have large section fork pockets and legs, to allow the truck stabilisers to pass under the fork pockets. Available with 4 different entry gates: lift up front bar (1 person), through bars (2 person), front gate (1 person) and left side gate (2 person).

Crane Slung Man-Riding Access Basket comes supplied with chains, one safety harness and overhead guard. The basket has been designed to be used either slung from the hook of an overhead crane or mounted on the forks of a lift truck. Available in either 2 or 6 person models: 2 person, either side gate or through bars. 6 person only comes with side gate but with different platform sizes. The overall base size of the unit is 1500mm wide x 1100mm deep. The unit will have a fully meshed back panel, and the three other sides will be meshed to the middle rail. Entry to the platform is via an inwards opening gate on the one 1100mm side. Gate is self-closing and has a gate arrester to prevent the gate being opened when the platform is elevated.

Crane Slung/Fork Mounted Man-Riding Aluminium Platform is fitted with 4 x overhead lifting points and fork truck pickets if required. It has been designed to be used either slung from the hook of an overhead crane or mounted on the forks of a lift truck. Crane slung man lifting baskets are on a special made to order basis and the item can be modified in size and for different numbers of users dependant on the customers requirement.