Endless Ratchet Lashing, Min. Breaking Strength Range from 1 tonne to 20 tonne

Our comprehensive range of load securing products are manufactured as standard with the common 'Calw Hook' however, alternative end fittings are available to suit individual requirements and we can accommodate all types of tie-down applications.

Endless ratchet lashing are supplied with no end fitting. The webbing is sewn to the front of the ratchet mechanism then threaded through the back and tension applied.

...we also sell Two Part ratchet lashings.

The polyester webbing and ratchet tensioners, are designed for strength, durability and ease of operation. Systems vary from 25mm wide for lightweight applications such as roof rack straps to 75mm wide for securing plant and equipment on low loaders etc.

The type and strength of the system will vary according to the load and the distribution of weight. Lashings are supplied in standard production colours, but if necessary, we can discuss individual requirements, for example corporate colours. In addition a printing service can be offered for company identification. Additionally, anti abrasive and anti cutting protection is available for most lashings.

We recommend that reference is made to the Department of Transport code of Practice ‘Safety of Loads on Vehicles’ [available from HMSO].

Ratchet Lashing Options

25mm Wide Ratchet Lashing	35mm Wide Ratchet Lashing	50mm Wide Ratchet Lashing	75mm Wide Ratchet Lashing
Minimum Break Strength: Endless: 1t Two Part: 0.5t Rated Assembly Strength: Endless: 0.5t Two Part: 0.25t	Minimum Break Strength: Endless: 6t Two Part: 3t Rated Assembly Strength: Endless: 3t Two Part: 1.5t	Minimum Break Strength: Endless: 10t Two Part: 5t Rated Assembly Strength: Endless: 5t Two Part: 2.5t	Minimum Break Strength: Endless: 20t Two Part: 10t Rated Assembly Strength: Endless: 10t Two Part: 5t