Standard 2-Piece Ratchet Straps with Hooks
Our comprehensive range of load securing products is manufactured as standard with the common 'Claw Hook'; however, alternative end fittings are available to suit individual requirements, and we can accommodate all types of tie-down applications.
A two-part ratchet strap comprises of a ratchet mechanism with small length (500mm on the 50mm wide ratchet lashing) of webbing sewn to the front and the fitting (Claw Hook as standard) to the other end and then a length of webbing, with a plain end (to thread through the back for the ratchet mechanism) with a fitting at the other end.
...we also offer Endless Ratchet Straps
The polyester webbing and ratchet tensioners are designed for strength, durability and ease of operation. Systems vary from 25mm wide for lightweight applications such as roof rack straps to 75mm wide for securing plant and equipment on low loaders, etc.
The type and strength of the system will vary according to the load and the distribution of weight. Lashings are supplied in standard production colours, but if necessary, we can discuss individual requirements, for example, corporate colours. In addition, a printing service can be offered for company identification. Additionally, anti-abrasive and anti-cutting protection is available for most lashings.
We recommend that reference is made to the Department of Transport Code of Practice ‘Safety of Loads on Vehicles’ [available from HMSO].
Alternative end fittings, such as D-links or flat or twisted snap hooks, are optionally available. Please contact us for more information.
Ratchet Strap Webbing Width and Capacity Options
| 25mm Wide Ratchet Strap |
35mm Wide Ratchet Strap |
50mm Wide Ratchet Strap |
75mm Wide Ratchet Strap |
|
|
|
|
|
Minimum Break Strength: 0.5t
Rated Assembly Strength: 0.25t |
Minimum Break Strength: 3t
Rated Assembly Strength: 1.5t |
Minimum Break Strength: 5t
Rated Assembly Strength: 2.5t |
Minimum Break Strength: 10t
Rated Assembly Strength: 5t |
