Single Piece Endless Ratchet Straps
Our comprehensive range of load securing products is manufactured as standard with the common 'Claw Hook'; however, alternative end fittings are available to suit individual requirements, and we can accommodate all types of tie-down applications.
Endless ratchet lashings are supplied with no end fitting. The webbing is sewn to the front of the ratchet mechanism. To use the strap is then threaded through the back of the ratchet, where tension can be applied.
...we also offer Two Part Ratchet Straps.
The polyester webbing and ratchet tensioners are designed for strength, durability, and ease of operation. Systems vary from 25mm wide for lightweight applications such as roof rack straps to 75mm wide for securing plant and equipment on low loaders, etc.
The type and strength of the system will vary according to the load and the distribution of weight. Lashings are supplied in standard production colours, but if necessary, we can discuss individual requirements, for example, corporate colours. In addition, a printing service can be offered for company identification. Additionally, anti-abrasive and anti-cutting protection is available for most lashings.
We recommend that reference is made to the Department of Transport Code of Practice ‘Safety of Loads on Vehicles’ [available from HMSO].
Endless Ratchet Strap Widths and Capacity Options
| 25mm Wide Ratchet Strap |
35mm Wide Ratchet Strap |
50mm Wide Ratchet Strap |
75mm Wide Ratchet Strap |
|
|
|
|
|
Minimum Break Strength: Endless: 1t
Rated Assembly Strength: Endless: 0.5t |
Minimum Break Strength: Endless: 6t
Rated Assembly Strength:Endless: 3t |
Minimum Break Strength: Endless: 10t
Rated Assembly Strength: Endless: 5t |
Minimum Break Strength: Endless: 20t
Rated Assembly Strength: Endless: 10t |
