Crosby IPBC Horizontal Plate Clamp with Pretension Device, WLL Range from 1000kg to 3000kg
Crosby IPBC Horizontal Plate Clamp with Pretension Device, WLL Range from 1000kg to 3000kg
Crosby IP Horizontal Plate Clamp for Steel Beams and Plates
Model:
Crosby IPBC
Quick Ref:
HPC-891
More from:
The Crosby IPBC horizontal lifting clamps have a pretension feature that allows the user to attach the clamps to the material for horizontal lifting and transfer of sagging and non-sagging material. These clamps may also be used to handle material that will be used in shears, bending and rolling machines or other fabrication equipment and also be used for turning beams from the “H” into the “I” position.
Available in capacities of 1 to 3 metric tons.
Jaw openings available: 0 to 25mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
Maintenance and repair kits are available.
Manufactured by an ISO 9001 facility.
All sizes are RFID EQUIPPED.
Metric Dimensions & Specifications
Part No.
WLL per clamp (t)*
Dimensions (mm)
Weight per clamp (kg)
Jaw A
B
C
E
F
G
H
J
K
2700410
1.0
0-20
132
52
26
75
185
36
16
182
3.5
2700411
2.0
0-25
152
62
30
82
210
49
20
218
6.5
2700412
3.0
0-25
117
66
30
82
210
57
20
225
8.5
* Design Factor based on EN 13155 and ASME B30.20
Contact Us About This Product
If you wish to receive a quote for this product, please use the Pricing section to the right, this form is for general enquiries regarding this product only.
Regarding: Crosby IPBC Horizontal Plate Clamp with Pretension Device, WLL Range from 1000kg to 3000kg
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
Pricing
The Crosby IPBC horizontal lifting clamps have a pretension feature that allows the user to attach the clamps to the material for horizontal lifting and transfer of sagging and non-sagging material. These clamps may also be used to handle material that will be used in shears, bending and rolling machines or other fabrication equipment and also be used for turning beams from the “H” into the “I” position.
Available in capacities of 1 to 3 metric tons.
Jaw openings available: 0 to 25mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
Maintenance and repair kits are available.
Manufactured by an ISO 9001 facility.
All sizes are RFID EQUIPPED.
Metric Dimensions & Specifications
Part No.
WLL per clamp (t)*
Dimensions (mm)
Weight per clamp (kg)
Jaw A
B
C
E
F
G
H
J
K
2700410
1.0
0-20
132
52
26
75
185
36
16
182
3.5
2700411
2.0
0-25
152
62
30
82
210
49
20
218
6.5
2700412
3.0
0-25
117
66
30
82
210
57
20
225
8.5
* Design Factor based on EN 13155 and ASME B30.20
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Crosby IPBC Horizontal Plate Clamp with Pretension Device, WLL Range from 1000kg to 3000kg
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
