Camlok CH & HH Horizontal Plate Clamps

Plate Clamps for Lifting Steel Sheets or Plates in the Horizontal Position

The Camlok CH and HH horizontal lifting clamps have been specially designed to be used in pairs for loading process machines and to lift and transport sheet steel plate (of single plates with a minimum thickness of approx. 5 mm), as well as for plate bundles (HH version only) in the horizontal position.

Using a single pair of clamps is appropriate for small plates. For extra-large or long plates, it is recommended to use two sets in conjunction with a lifting beam or a spreader beam.

These clamps are supplied as standard with a 'Smooth Jaw'. There is also the option of hardened steel teeth jaws for special applications.

The HH clamps incorporate all the features of the CH clamps, though they are manufactured from high-strength steel, giving them exceptionally low tare weights.

Note: The CH1 model is fitted with a single jaw.

Clamp Features

• Capacities: 1 Tonne to 20 Tonne.
• Jaw Capacities 5 to 150mm.
• Sold in Pairs.
• Single clamps are available if required.
• CH clamps with serrated jaws can only be used for single plates, NOT bundles.
• Chain sling are not included but can be supplied.
• Must not be used with an endless chain sling.
• The angle between the chain/rope legs must not exceed 45 Degrees from the vertical.
• Designed and manufactured in the UK.

Dimensions & Specifications

	WLL per Pair (kg)	Jaw Capacity (mm)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G Dia. (mm)	Weight Per Pair (kg)
CH1	1000	5 - 32	30	82	60	100	32	44	13	8
CH2	2000	5 - 32	30	82	60	100	50	73	18	11
CH2L	2000	20 - 50	30	82	60	100	50	73	18	12
CH4	4000	5 - 50	40	112	80	100	64	92	25	17
CH4L	4000	50 - 100	40	112	80	100	64	92	25	23
CH6	6000	5 - 75	55	172	100	130	90	130	35	46
CH6L	6000	50 - 125	55	172	100	130	90	130	35	56
CH8	8000	5 - 75	55	172	105	130	90	130	35	53
CH8L	8000	50 - 125	55	172	105	130	90	130	35	60
CH10	10000	5 - 100	65	215	120	150	114	114	37 x 50	95
CH10L	10000	50 - 150	65	215	120	150	114	114	37 x 50	108
CH15	15000	5 - 100	71	230	120	150	114	114	37 x 50	110
CH15L	15000	50 - 150	71	230	120	150	114	114	37 x 50	123
CH20	20000	5 - 100	70	220	118	220	80	120	38 x 60	165
CH20L	20000	50 - 150	70	220	118	220	80	120	38 x 60	172
HH8	8000	5 - 50	55	168	105	130	67	67	24	21
HH8L	8000	50 - 100	55	168	105	130	67	67	24	28