High capacity gantry wire rope hoist, 230 or 110v, 30m working height. 300kg capacity.
Model:
ET300 / IEFS-5025
More from:
300kg 110V Electric Builders Hoist
This 300kg gantry hoist has a 30m height of lift, which is designed to be used within scaffolding or on a flat room where there is no scaffold to attach a lifting hoist to. It is ideal for the small builder or larger contractor to lift material from the ground or lower material to the ground safely.
It has a running beam 3.3m long and allows an overhang of 1m beyond the edge of the safety board to enable material to be manoeuvred along the hoist runway safely and without effort. It has a top limit lever and a micro switch to stop the hoist when it is at the top of its lift safely. The hook has a spring-loaded safety catch to keep the load carrier within the hook. The Hoist also has a Brake to control the travel along its runway and Rubber stops at each end of the travel.
To comply with lifting regulations, it comes complete with a front kickboard and lockable back ballast boxes (150Kg ballast weight in each box is required, NOT SUPPLIED)
Hoist Features
Capacity:
Max. working height:
Single-phase 230V/50Hz electric motor
IP67 plug
Frame with 4 aluminium wheels
Upper limit safety device
Direct controls with a 3-pushbutton 1m pendant control
Positioning brake
Self-braking motor with a magnetic device
Specifications: ET300
Maximum capacity
kg
300
Av. Full load lifting speed
m/min
19
Max. working height
m
30
Ø steel rope
mm
5
Rope length
m
31
Motor power rate 110V/50Hz
kW
1.1
Motor speed
rpm
1320 (230V)/1320(110V)
Running current
A
18 (110V)
Machine weight
kg
50
SPL in the operator’s position
dB(A)
<75
Dimensions w/l/h
mm
330/780/380
Packing dimensions w/l/h
mm
350/820/440
Assembled Overall Dimensions (Approx)
Beam: 3.3m
Trestles: 1.5m Wide x 2.3m High
Trestles Inc. Ballast Boxes: 2.3m
Each Scaffold Hoist Gantry Kit Includes
300kg Single Phase 110V or 230V - 50Hz Scaffold Hoist with 1m Pendant Control
1 x Universal Gantry 300kg
2 x Ballast Box 150kg (2 Required) *Weights not included
1 x Foot Protection - Toe Board
1 x Front Trestle 300kg
1 x Rear Trestle 300kg
2 x Basement Reinforcing Bars
1 x 300kg Beam
1 x Bolt Kit for Gantry System
Contact Us About This Product
If you wish to receive a quote for this product, please use the Pricing section to the right, this form is for general enquiries regarding this product only.
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
Pricing
300kg 110V Electric Builders Hoist
This 300kg gantry hoist has a 30m height of lift, which is designed to be used within scaffolding or on a flat room where there is no scaffold to attach a lifting hoist to. It is ideal for the small builder or larger contractor to lift material from the ground or lower material to the ground safely.
It has a running beam 3.3m long and allows an overhang of 1m beyond the edge of the safety board to enable material to be manoeuvred along the hoist runway safely and without effort. It has a top limit lever and a micro switch to stop the hoist when it is at the top of its lift safely. The hook has a spring-loaded safety catch to keep the load carrier within the hook. The Hoist also has a Brake to control the travel along its runway and Rubber stops at each end of the travel.
To comply with lifting regulations, it comes complete with a front kickboard and lockable back ballast boxes (150Kg ballast weight in each box is required, NOT SUPPLIED)
Hoist Features
Capacity:
Max. working height:
Single-phase 230V/50Hz electric motor
IP67 plug
Frame with 4 aluminium wheels
Upper limit safety device
Direct controls with a 3-pushbutton 1m pendant control
Positioning brake
Self-braking motor with a magnetic device
Specifications: ET300
Maximum capacity
kg
300
Av. Full load lifting speed
m/min
19
Max. working height
m
30
Ø steel rope
mm
5
Rope length
m
31
Motor power rate 110V/50Hz
kW
1.1
Motor speed
rpm
1320 (230V)/1320(110V)
Running current
A
18 (110V)
Machine weight
kg
50
SPL in the operator’s position
dB(A)
<75
Dimensions w/l/h
mm
330/780/380
Packing dimensions w/l/h
mm
350/820/440
Assembled Overall Dimensions (Approx)
Beam: 3.3m
Trestles: 1.5m Wide x 2.3m High
Trestles Inc. Ballast Boxes: 2.3m
Each Scaffold Hoist Gantry Kit Includes
300kg Single Phase 110V or 230V - 50Hz Scaffold Hoist with 1m Pendant Control
1 x Universal Gantry 300kg
2 x Ballast Box 150kg (2 Required) *Weights not included
1 x Foot Protection - Toe Board
1 x Front Trestle 300kg
1 x Rear Trestle 300kg
2 x Basement Reinforcing Bars
1 x 300kg Beam
1 x Bolt Kit for Gantry System
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
