- Lifting Equipment
-
Height Safety
Height Safety Equipment
- Material Handling & Jacking Equipment
- Shop by Brand
- Clearance
-
Contact
Get In Touchsales@liftingsafety.co.uk +44 (0)1977 684 600
- Home/
- Lifting Equipment/
- Wire Rope Pulling Winches & Lifting Hoists/
- Scaffold Hoists & Accessories/
- Scaffold Hoists/
- 110v or 240v Scaffold Hoist
Builders Scaffold Hoist
With capacity options starting from 80kg and increasing up to 300kg, this scaffold hoist can cover most building site requirements, but if you are looking for a higher capacity or longer rope length, for example, then take a look at our entire range of scaffold hoists, or get in touch. We'll gladly assist in any way we can.
Hoist Features
- Capacities available: 80kg, 160kg, 230kg or 300kg.
- Lightweight and compact design for easy handling and installation.
- 10 metre plug-in pendant control (IP65 rated) with up, down & emergency stop.
- 360° weighted swivel hook with safety catch.
- Automatic upper limit switch - When the rope disc touches the limit arm, hoisting is automatically stopped.
- The dynamic and mechanical brake provides instant, safe braking.
- Operates on standard 240V household power supply (110V version - via transformer).
- The reverse winding limiter prevents the wire rope from being wound back into the casing in reverse.
- Supplied with non-spin galvanised wire rope.
- Spring-loaded safety lock for secure attachment to the scaffold.
- 5 metre power lead with a commercial type 3 pin plug for either 240v or 110v models.
- Motor rating IP44, Brush type motor.
- Fully compliant with EN 14492-2 Hoists Directive.
- Ensure that the fixing points for these hoists are capable of supporting the loads required.
- 5 wraps of wire rope must be maintained on the drum.
- Optional: Scaffold-supported jib arm with 180° rotation. Load tested to 230kg (not available for 300kg scaffold hoist)
- Optional: Pendant control extension - plug in for an additional 10 metre length
- These hoists MUST NOT be used for the movement of personnel, and 5 wraps of wire rope must be maintained on the drum.
Dimensions & Specifications
![]() |
![]() |
| 80kg Scaffold Hoist | 160kg, 230kg & 300kg Scaffold Hoist |
| Capacity | 80kg | 160kg | 230kg | 300kg | |||
| Voltage | 110v | 240v | 110v | 240v | 110v | 240v | 240v Only |
| Lifting Height | 23m | 30m | 24m | 24m | |||
| Hoist Weight | 9kg | 14kg | 15kg | 17kg | |||
| Line Speed: 1st Layer | 18m/min | 15m/min | 9m/min | 9m/min | |||
| Line Speed: Last Layer | 30m/min | 25m/min | 14m/min | 13m/min | |||
| Duty Cycle | All have a duty cycle of 25%, with a Max. 60 starts per hour | ||||||
| Wire Rope Dia. | 4mm | 5mm | 5mm | 5mm | |||
| Wire Rope Length | 24m | 31m | 25m | 25m | |||
| Rope Construction | 7 x 18 wire core, spin resistant, Galv. Factor of safety 5:1 | ||||||
| Motor Output: kW | 0.8kW | 0.8kW | 1.2kW | 1.2kW | 1.2kW | 1.2kW | 1.5kW |
| Motor Output: Amps | 8 Amp | 4 Amp | 12 Amp | 6 Amp | 12 Amp | 6 Amp | 7.5 Amp |
Pricing
Builders Scaffold Hoist
With capacity options starting from 80kg and increasing up to 300kg, this scaffold hoist can cover most building site requirements, but if you are looking for a higher capacity or longer rope length, for example, then take a look at our entire range of scaffold hoists, or get in touch. We'll gladly assist in any way we can.
Hoist Features
- Capacities available: 80kg, 160kg, 230kg or 300kg.
- Lightweight and compact design for easy handling and installation.
- 10 metre plug-in pendant control (IP65 rated) with up, down & emergency stop.
- 360° weighted swivel hook with safety catch.
- Automatic upper limit switch - When the rope disc touches the limit arm, hoisting is automatically stopped.
- The dynamic and mechanical brake provides instant, safe braking.
- Operates on standard 240V household power supply (110V version - via transformer).
- The reverse winding limiter prevents the wire rope from being wound back into the casing in reverse.
- Supplied with non-spin galvanised wire rope.
- Spring-loaded safety lock for secure attachment to the scaffold.
- 5 metre power lead with a commercial type 3 pin plug for either 240v or 110v models.
- Motor rating IP44, Brush type motor.
- Fully compliant with EN 14492-2 Hoists Directive.
- Ensure that the fixing points for these hoists are capable of supporting the loads required.
- 5 wraps of wire rope must be maintained on the drum.
- Optional: Scaffold-supported jib arm with 180° rotation. Load tested to 230kg (not available for 300kg scaffold hoist)
- Optional: Pendant control extension - plug in for an additional 10 metre length
- These hoists MUST NOT be used for the movement of personnel, and 5 wraps of wire rope must be maintained on the drum.
Dimensions & Specifications
![]() |
![]() |
| 80kg Scaffold Hoist | 160kg, 230kg & 300kg Scaffold Hoist |
| Capacity | 80kg | 160kg | 230kg | 300kg | |||
| Voltage | 110v | 240v | 110v | 240v | 110v | 240v | 240v Only |
| Lifting Height | 23m | 30m | 24m | 24m | |||
| Hoist Weight | 9kg | 14kg | 15kg | 17kg | |||
| Line Speed: 1st Layer | 18m/min | 15m/min | 9m/min | 9m/min | |||
| Line Speed: Last Layer | 30m/min | 25m/min | 14m/min | 13m/min | |||
| Duty Cycle | All have a duty cycle of 25%, with a Max. 60 starts per hour | ||||||
| Wire Rope Dia. | 4mm | 5mm | 5mm | 5mm | |||
| Wire Rope Length | 24m | 31m | 25m | 25m | |||
| Rope Construction | 7 x 18 wire core, spin resistant, Galv. Factor of safety 5:1 | ||||||
| Motor Output: kW | 0.8kW | 0.8kW | 1.2kW | 1.2kW | 1.2kW | 1.2kW | 1.5kW |
| Motor Output: Amps | 8 Amp | 4 Amp | 12 Amp | 6 Amp | 12 Amp | 6 Amp | 7.5 Amp |
You May Also Like
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!

