Gunnebo GrabiQ CH3 Container Hook Chain Lifting Hook, WLL 12.5 tonne

• Gunnebo GrabiQ, Grade 10.
• Manufactured from quenched and tempered alloy steel, a guarantee for very high strength, low weight, high wear resistance and long life.
• Uniformly marked with equivalent chain size, grade, manufacture's designation and name for positive identification.

Especially made for lifting containers from the lower fitting points.

• Large eye for easy connection to wire rope or chain legs.
• Full traceability
• Proof tested and certified

CH-3 should always be used with, either a 2 or 4 point spreader beam / spreader bar.

CH-3 is available as a straight and turned 45 degrees. To avoid the risk of disengagement during use, a tolerance of +- 15 degrees from nominal should be adhered to.

We recommend that you use a spreader and lift from the bottom when the container is loaded as this is where the container is strongest.

If a two point connection spreader is used the WLL of CH-3 is to be reduced due to the angles.

A 4-leg sling is also possible to use but then you need to:

• Make sure the hooks and chains can move free to the intended load angles without obstruction.
• Only lift in the bottom corners.

CH-3 Straight

CH-3 turned 45° left (Marked 'V')

CH-3 turned 45° right (Marked'H')

GrabiQ CH-3 Container Hook

Type	WLL t	L	B	H	F	G	E	Weight kgs
CH-3, Straight	12.5	187	70	46	25	47	75	3.9
CH-3, 45° left	12.5	187	70	46	25	47	75	3.9
CH-3, 45° right	12.5	187	70	46	25	47	75	3.9

*Design Factor 4:1 Proof tested and certified

Left hook marked with “V” Righ hook marked with “H”

Straight Lift with 4 x CH-3 Straight

Angular Lift with 2 x CH-3, 45° left & CH-3, 45° Right