Counterbalance Crane with Hydraulic Lift
This is our most popular counterbalance workshop floor crane, and the design of this portable floor crane incorporates many key features that make it one of the most versatile items of workshop lifting equipment that we sell. We also make special versions of the crane to our customers' own specification with bespoke dimensions and lifting capacities, jib reach and height.
Note: Some pictures shown are our artists' impression only and are only indicative of our capability. (for display purposes only) All cranes are made individually, and the design may be subject to change according to your required specification; the pictures are not to scale. General arrangement drawings will be issued for approval on receipt of your order.
The Most Common Additions to the Standard Cranes are:
- Removable vertical jib column to assist packing for export orders
- Vertical telescopic mast adjustment
- Brakes with locking castors and directional locking castors/wheels
- Electric power drive/propulsion and electric lift
- Outriggers on the crane body ensure a stable lift at height.
- Certified lifting points for the ability to have a crane lifted/moved by an overhead crane.
- Fork truck pockets, to enable the counterbalanced floor crane to be moved by a fork truck.
- Jacking feet to give a level and stable lift
- A rotating vertical jib arm that will rotate 15 degrees in either direction
- Hydraulic telescopic extending jib arm.
- Please see the Images Tab above for pictures of these features.
Features
- Allows operator freedom to work close to machines or over obstructions
- Designed with safety in mind, this crane meets all international safety standards
- Robust construction
- Manufactured from a steel box section for combined strength and lightness
- All-welded construction
- All models feature a heavy-duty, double-acting pump for fast action
- Fitted with a safety relief valve to prevent overload
- Top quality hydraulics fitted with a chrome-plated piston rod on the ram and pump
- Precision-built hydraulic ram
- Precision-built hydraulic pump
- Fitted with hard-wearing polyurethane front wheels and a swivel castor on the rear for easy movement of the crane when operational
- Rear swivel castors have brakes fitted
- Heavy-duty swivel hook fitted with a safety latch
- Each crane has been individually tested to 25% overload as a complete unit
- Test certificate/letter of conformity supplied with each crane
- Counterbalance not supplied, if ballast less than the stated amount is used, the safe working load will be reduced.
- Sand or concrete blocks can be used on 152kg, 254kg and 508kg
- Models 750kg and 1000kg require Metal Ballast
- Come with a 12-month guarantee
Standard Counterbalanced Crane
Stainless Steel Construction with Powered Hydraulics
Important Safety Information.
- Always inspect the hook and latch before using.
- Never use a latch that is distorted or bent.
- Always make sure the spring will force the latch against the tip of the hook
- Always make sure the hook supports the loads.
- The latch must never support the load
- When placing two or more loads, the hook may disengage from the load if proper procedures are not followed
- A falling load may cause serious injury or death
- A hook and this style latch must not be used for lifting personnel
- Hooks must always support the load
For Optional Features and Accessories - refer to the tab above "Optional Features"
Floor Cranes With Spark-Resistant Features / Explosion-Proof.
For Floor cranes to be used in potentially explosive areas/atmospheres such as Zone 1 or 2, SELS can include any anti-sparking features that our customers specify - this will increase its anti-sparking properties and therefore make the crane more suitable for use in a potentially explosive environment.
SELS will not take the responsibility of supplying our floor cranes described as 'spark proof' as this is ‘too broad’ a term. We believe that total compliance is probably impossible because of the mechanical operation and movement of a floor crane; i.e. we cannot offer a 100% guarantee that no part of the assembly is capable of generating a spark which could ignite a flame. IE, SELS will supply/manufacture cranes with anti-sparking features to our customers’ requirements, though will not certify them as sparkproof / explosion proof. Our cranes have been successfully supplied to customers in the offshore Oil and Gas industry in the UK on this basis.